Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 06, 2017, 07:43:26 PM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know!
|
|
|
|
Eyedol-X
|
|
February 07, 2017, 02:55:39 PM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know! I purchased the Corsair SP Fans. I will update when I get mine running.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 07, 2017, 03:38:31 PM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know! I purchased the Corsair SP Fans. I will update when I get mine running. Yeah definitely let me know how they work! Also, are you swapping out just the front 3 fans or did you change out all 6 120mm fans for the corsair ones?
|
|
|
|
Eyedol-X
|
|
February 07, 2017, 06:48:54 PM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know! I purchased the Corsair SP Fans. I will update when I get mine running. Yeah definitely let me know how they work! Also, are you swapping out just the front 3 fans or did you change out all 6 120mm fans for the corsair ones? Not enough room to have the 3 fans in the middle of the chassis with everything in it (I tried several different ways of doing it) using 7X MSI GTX 470 Gaming cards. So I opted for better fans at the front. Note: This configuration is ideally suited for hot air to exit the front, not intake -- that's something I didn't realize when I purchased. Now that I have one near setup and 3 more in process of ordering I'm comfortable with it that way for my use but it will be a little different looking at the back of the rig than the front lol.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 07, 2017, 06:54:05 PM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know! I purchased the Corsair SP Fans. I will update when I get mine running. Yeah definitely let me know how they work! Also, are you swapping out just the front 3 fans or did you change out all 6 120mm fans for the corsair ones? Not enough room to have the 3 fans in the middle of the chassis with everything in it (I tried several different ways of doing it) using 7X MSI GTX 470 Gaming cards. So I opted for better fans at the front. Note: This configuration is ideally suited for hot air to exit the front, not intake -- that's something I didn't realize when I purchased. Now that I have one near setup and 3 more in process of ordering I'm comfortable with it that way for my use but it will be a little different looking at the back of the rig than the front lol. So you are pulling in air from the rear near the PSU and exhausting out the front near the GPUs? If so, then this case will not have any protection from dust correct because the dust filter is only in the front
|
|
|
|
Eyedol-X
|
|
February 07, 2017, 08:23:42 PM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know! I purchased the Corsair SP Fans. I will update when I get mine running. Yeah definitely let me know how they work! Also, are you swapping out just the front 3 fans or did you change out all 6 120mm fans for the corsair ones? Not enough room to have the 3 fans in the middle of the chassis with everything in it (I tried several different ways of doing it) using 7X MSI GTX 470 Gaming cards. So I opted for better fans at the front. Note: This configuration is ideally suited for hot air to exit the front, not intake -- that's something I didn't realize when I purchased. Now that I have one near setup and 3 more in process of ordering I'm comfortable with it that way for my use but it will be a little different looking at the back of the rig than the front lol. So you are pulling in air from the rear near the PSU and exhausting out the front near the GPUs? If so, then this case will not have any protection from dust correct because the dust filter is only in the front Yup, I'm going to try to setup this first one to intake air from the front and do a test but the problem is you will push all that heat from the GPU's into the PSU, Board, Memory/CPU -- I'm not sure which is the lesser of the two evils. The kit and its instructions however have the hot air coming out the front.
|
|
|
|
baldpope
|
|
February 08, 2017, 02:25:29 PM |
|
Yup, I'm going to try to setup this first one to intake air from the front and do a test but the problem is you will push all that heat from the GPU's into the PSU, Board, Memory/CPU -- I'm not sure which is the lesser of the two evils.
The kit and its instructions however have the hot air coming out the front.
Just throwing my .02 BTC into the conversation. Unless the fans on the cards can be reversed, you almost have to exhaust out the front of the case. Otherwise the intake from the front fans and the exhaust (Facing the front) from the GPUs will just create some interesting thermal eddy's and not really move sufficient air in the first place. If you're really concerned with air-flow at the rear, you could also add a few of the pci-slot exhaust fans, like these: https://www.newegg.com/Product/Product.aspx?Item=N82E16835119066I'm not recommending that one specifically, just using as reference. The case add-on looks great, if I was getting back into GPU mining, I'd pick this up in a heart beat.
|
|
|
|
Eyedol-X
|
|
February 08, 2017, 04:41:10 PM Last edit: February 08, 2017, 05:16:31 PM by Eyedol-X |
|
Yup, I'm going to try to setup this first one to intake air from the front and do a test but the problem is you will push all that heat from the GPU's into the PSU, Board, Memory/CPU -- I'm not sure which is the lesser of the two evils.
The kit and its instructions however have the hot air coming out the front.
Just throwing my .02 BTC into the conversation. Unless the fans on the cards can be reversed, you almost have to exhaust out the front of the case. Otherwise the intake from the front fans and the exhaust (Facing the front) from the GPUs will just create some interesting thermal eddy's and not really move sufficient air in the first place. If you're really concerned with air-flow at the rear, you could also add a few of the pci-slot exhaust fans, like these: https://www.newegg.com/Product/Product.aspx?Item=N82E16835119066I'm not recommending that one specifically, just using as reference. The case add-on looks great, if I was getting back into GPU mining, I'd pick this up in a heart beat. There is an option that reverses the GPUs to point towards the back. It's not a standard option but I requested it for an additional cost. Currently all my GPU's face the back, Good idea on the blower fan, I didn't even think of adding those in as its been years since I've used them. Don't know if they will get in the way of riser adapters or not but I'm going to look into this option. Edit: From what I can tell, these blowers will interfere with the PCIE 1x-16x risers. Bummer.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 08, 2017, 08:01:56 PM |
|
Yup, I'm going to try to setup this first one to intake air from the front and do a test but the problem is you will push all that heat from the GPU's into the PSU, Board, Memory/CPU -- I'm not sure which is the lesser of the two evils.
The kit and its instructions however have the hot air coming out the front.
Just throwing my .02 BTC into the conversation. Unless the fans on the cards can be reversed, you almost have to exhaust out the front of the case. Otherwise the intake from the front fans and the exhaust (Facing the front) from the GPUs will just create some interesting thermal eddy's and not really move sufficient air in the first place. If you're really concerned with air-flow at the rear, you could also add a few of the pci-slot exhaust fans, like these: https://www.newegg.com/Product/Product.aspx?Item=N82E16835119066I'm not recommending that one specifically, just using as reference. The case add-on looks great, if I was getting back into GPU mining, I'd pick this up in a heart beat. There is an option that reverses the GPUs to point towards the back. It's not a standard option but I requested it for an additional cost. Currently all my GPU's face the back, Good idea on the blower fan, I didn't even think of adding those in as its been years since I've used them. Don't know if they will get in the way of riser adapters or not but I'm going to look into this option. Edit: From what I can tell, these blowers will interfere with the PCIE 1x-16x risers. Bummer. Sorry if this is a noob question, but why would you want the graphics cards to face the motherboard? If everyone says it is best to have the case exhaust air from the side with the graphics cards on it, wouldn't we want the cards facing those fans that are exhausting hot air? By facing I mean the side with the video ports facing the front case fans. Also, if you could clarify if this is for blower style or non that would maybe clear things up.
|
|
|
|
Eyedol-X
|
|
February 08, 2017, 09:39:54 PM |
|
Yup, I'm going to try to setup this first one to intake air from the front and do a test but the problem is you will push all that heat from the GPU's into the PSU, Board, Memory/CPU -- I'm not sure which is the lesser of the two evils.
The kit and its instructions however have the hot air coming out the front.
Just throwing my .02 BTC into the conversation. Unless the fans on the cards can be reversed, you almost have to exhaust out the front of the case. Otherwise the intake from the front fans and the exhaust (Facing the front) from the GPUs will just create some interesting thermal eddy's and not really move sufficient air in the first place. If you're really concerned with air-flow at the rear, you could also add a few of the pci-slot exhaust fans, like these: https://www.newegg.com/Product/Product.aspx?Item=N82E16835119066I'm not recommending that one specifically, just using as reference. The case add-on looks great, if I was getting back into GPU mining, I'd pick this up in a heart beat. There is an option that reverses the GPUs to point towards the back. It's not a standard option but I requested it for an additional cost. Currently all my GPU's face the back, Good idea on the blower fan, I didn't even think of adding those in as its been years since I've used them. Don't know if they will get in the way of riser adapters or not but I'm going to look into this option. Edit: From what I can tell, these blowers will interfere with the PCIE 1x-16x risers. Bummer. Sorry if this is a noob question, but why would you want the graphics cards to face the motherboard? If everyone says it is best to have the case exhaust air from the side with the graphics cards on it, wouldn't we want the cards facing those fans that are exhausting hot air? By facing I mean the side with the video ports facing the front case fans. Also, if you could clarify if this is for blower style or non that would maybe clear things up. For a traditional cold / hot server rack environment, the cold air goes in the front and the hot air out the back. with the hot air going out the front you would have to install your chassis backwards on the hot side where it wouldn't get optimal cold air on the front side since its mounted at the back. This kit as pictured, exhausts hot air out the front. I ordered my kit with extra parts allowing me to mount GPUs in reverse direction of the pictures where it would blow the hot air out the back as a test to see how it performs..
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 08, 2017, 09:44:33 PM |
|
What about if I am not using blower style cards, can I use the rack as it is pictured and have it draw in through the front (as the case is designed) and have it exhaust out the back (where the motherboard is) because then with non blower cards air is just flowing all around to my understanding
|
|
|
|
Eyedol-X
|
|
February 08, 2017, 10:16:12 PM |
|
What about if I am not using blower style cards, can I use the rack as it is pictured and have it draw in through the front (as the case is designed) and have it exhaust out the back (where the motherboard is) because then with non blower cards air is just flowing all around to my understanding
This is what I'm currently testing. The short answer is you'd have to order the kit with the additional option to reverse the cards as I have. I hope to have more information regarding results this weekend but I'm waiting on a heatsink for the CPU to show up.
|
|
|
|
Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
February 08, 2017, 10:20:51 PM |
|
Okay, definitely let me know because I want to order some of these drop ins but I want to make sure I order the correct version!
|
|
|
|
D8V1D
|
|
February 09, 2017, 09:45:32 PM |
|
PM Sent
|
|
|
|
yun9999
|
|
February 10, 2017, 12:26:01 AM |
|
I would definitely recommend swapping out the stock fans with stronger fans.
Any recommendations on fans? I want it to be as cheap as possible with sufficient air flow. I plan on running 6 gtx 1070s in the Rosewill RSV-L4500 I was planning on running these cards: 08G-P4-5173-KR Also if you think there is a difference between blower style or non in this case design please let me know! See my review on the fans as well as my Server case installs. You need good flow as it gets very hot in there fast but with good fans, temp for these Rosewill are phenomenal https://bitcointalk.org/index.php?topic=1761303.60
|
|
|
|
|
Spotswood (OP)
|
|
February 12, 2017, 01:32:30 PM |
|
It will, but you will only be able to mount those two case fans/cages. In order to mount a third fan, you will need to order a set of 4x fan tabs and all required fasteners, which is +$5.25
|
|
|
|
andresrp
Member
Offline
Activity: 135
Merit: 11
|
|
February 12, 2017, 06:02:10 PM |
|
Do you have the link for the fan tab?
|
|
|
|
|
midas28
Newbie
Offline
Activity: 23
Merit: 0
|
|
February 19, 2017, 11:20:08 AM |
|
Anyway to make it support two psus on the rosewill case?
|
|
|
|
|