CredaCash *** FIRST PRIVACY COIN with INTEGRATED P2P CROSSCHAIN EXCHANGE ***

[CredaCash]

Greetings,

Thank you to everyone who has downloaded the new version of CredaCash and started using it.

A number of users have also begun mining CredaCash using the new release. As we stated last week, we believe if CredaCash is widely mined, then it will be successful, so this is a good start. More information on mining CredaCash can be found at https://CredaCash.com/credacash-mining-using-the-crosschain-exchange/

In order to address a few issues that have come up in the v2.0 release, we have prepared a v2.0.1_rc1 that contains a few fixes:

1.  On some computers, the node software might not receive blocks due to problems launching Tor. This issue has been fixed.

2. The exchange scripts have been updated for increased robustness, and for compatibility with both Python v2 and Python v3.

This update is available for download from our website at https://CredaCash.com/software/. If no further issues are found, we plan to make this an official v2.0.1 release shortly.

If you run into any difficulties, or have questions or comments, please feel free to contact us here, on our website at https://CredaCash.com/contact/ or on our Telegram channel at https://t.me/CredaCash_Official

Thank you,

The CredaCash Team

[CredaCash]

Greetings,

We've posted a second release candidate on our website at https://CredaCash.com/software/

This release candidate primarily addresses issues on very slow computers. It also increases reliability on all computers, making it a worthwhile update for all users.

This release candidate has been tested and works reliably on an Amazon Web Services (AWS) "t2.micro" Elastic Compute (EC2) virtual server instance. This instance type is part of the AWS "free tier" and can provide a no-cost cloud platform for mining CredaCash.  Even though this virtual server is very powered (about 10 to 20 times slower than a typical laptop), it can reliably mine CredaCash cryptocurrency.

If no further issues are found, we plan to make this an official v2.0.1 release shortly.

If you run into any difficulties, or have questions or comments, please feel free to contact us here, on our website at https://CredaCash.com/contact/ or on our Telegram channel at https://t.me/CredaCash_Official

Thank you,

The CredaCash Team

[CredaCash]

The CredaCash Team is pleased to announce their software release v2.0.1. This release primarily improves the robustness of the peer-to-peer exchange scripts, and exchange mining.

A total of 15 million units of CredaCash currency have been mined since the start of exchange mining on June 15, and the CredaCash exchange rate has doubled from 0.0002 BCH to 0.0004 BCH (approx US$0.14).

Over 99% of the total mining allocation remains to be mined. So this is a good time to get involved in mining CredaCash if you haven't yet. Mining is accomplished on the exchange by trading CredaCash for Bitcoin Cash (BCH), and the software includes a script to automate this process.  For more information, see https://CredaCash.com/credacash-mining-using-the-crosschain-exchange/

As we mentioned earlier, the CredaCash blockchain was designed from the ground up to handle digital assets, including debt, equity, and other securities, while maintaining complete privacy. The project has also developed breakthrough technology to allow millions of issuers to pay dividends, interest, royalties, rents, and other income near simultaneously on the blockchain without interrupting trading or overloading the network. This is a key capability to enable widespread securities issuance and administration on the blockchain.

For the future, we envision an open, global, consensus-based network where millions of digital assets are traded each day. A key enabler in this network will be CredaCash’s breakthrough technology to distribute dividends, interest, royalties, and other income on the blockchain, near simultaneously by millions of issuers with unprecedented speed and scalability.

We are actively looking for partners and contributors to make this happen, including funding, development and business relationships If you have any interest in contributing or partnering with the CredaCash project, or if you know someone who might, please contact us on our website at https://CredaCash.com/contact/

We remain always focused on the future.

Thank you, and please let us know if you have any questions or comments about our latest software release.

The CredaCash Team

[qq386437050]

Is there a compiled executable file?

[CredaCash]

Is there a compiled executable file?

The software at https://CredaCash.com/software/ contains two executable files ccnode-eval.exe and ccwallet-eval.exe. These are full compilations of the source code, without any technical limitations, but in order to limit legal liability, these compiled executable files are licensed for evaluation purposes only. If you are only using these executables for evaluation (for example, to sync and query the blockchain), then you can use them with mainnet by simply editing the batch files. The source code is also published on GitHub to allow anyone to create their own executables (which the build script will name ccnode.exe and ccwallet.exe).

Thank you for your inquiry, and if you have any additional questions or comments, or run into any issues, please don't hesitate to contact us.

[qq386437050]

Thanks, it is already running. How to import the wallet address and balance that participated in mining a long time ago?

[CredaCash]

Thanks, it is already running. How to import the wallet address and balance that participated in mining a long time ago?

The default wallet location for mainnet has not changed, it is still %LOCALAPPDATA%\CredaCash\CCWallet-1 and the wallet file name is still CCWallet.ccw. If your wallet file is no longer at that location, you would need to locate it and move it there, or point to it by setting wallet-file=<full-path-and-name-of-wallet-file> on the ccwallet.exe command line, or setting it in the configuration file ccwallet.conf. (Note that if the wallet file is totally lost, it can largely be reconstructed and the funds recovered from the master secret and passphrase if you still have those.)

[qq386437050]

What is the command to query wallet address, balance, etc., and how to obtain it? The command line help does not have

[CredaCash]

Note: RPC service not enabled (try using --interactive and/or --wallet-rpc=1)
What is the problem?

This message will appear if you run ccwallet.exe without telling it to do anything. In that case, it will simply terminate without taking any action. In order to get ccwallet to do something, you need to either (a) tell it to respond to interactive commands entered on the console; and/or (b) tell it to respond to RPC commands; and/or (c) give it a command on its command line.

Note that all of the batch files in the v.2.0.1 release include both --interactive and --wallet-rpc=1, so when these batch files run ccwallet, it will respond to both interactive console commands and RPC commands.

[CredaCash]

What is the command to query wallet address, balance, etc., and how to obtain it? The command line help does not have

Try "ccwallet-eval.exe help", or try "ccwallet-eval.exe --interactive" and then enter "help".

The command to get the wallet balance is "getbalance". CredaCash uses the bitcoin model, where the wallet can have multiple addresses. The command "getnewaddress" will give a new unused destination for receiving funds. (In general, a destination can only be used by one sender. The wallet will not send funds to a destination that was used by someone else.)

[CredaCash]

Greetings,

We posted a software update to resolve an issue that caused the node software to halt at block level 1299246. The issue was an assert statement triggered by floating point round off when checking the rate of an exchange request with a fractional amount. This issue did not result in any data loss or corruption.

The software update has been posted as v2.0.2-rc1 on our website at https://CredaCash.com/software. If there are no other issues, we will do a full v2.0.2 release shortly.

If you have any questions or run into any issues, please let us know here or via our website at https://CredaCash.com/contact

Thank you,

The CredaCash Team

[CredaCash]

Greetings,

We are pleased to announce the release of v2.0.2 of the CredaCash software. This release fixes a floating point rounding issue. Windows binaries are available on our website at https://CredaCash.com/software, and the source code is on Github at https://github.com/CredaCash.

Exchange mining of CredaCash currency remains active. Approximately 20 million Creda has been mined since exchange mining started on 6-June-2024, and the average exchange rate has increase from 0.0002 to 0.00045 BCH. Approx 99% remains to be mined, so this is a perfect time to acquire CredaCash currency through exchange mining. Instructions are available on our website at https://CredaCash.com/mining

Thank you for using CredaCash, and if you have any questions or run into any issues, please let us know here or via our website at https://CredaCash.com/contact

Thank you,

The CredaCash Team

[CredaCash]

Hello everyone,

Please join us on our Telegram channel at https://t.me/CredaCash_Official. We plan to use it for future announcements.

And please ask your friends and contacts to join us there as well!

Thank you,

The CredaCash Team

[Alexander45]

An interesting and fresh approach in the world of mining. Not wasting a huge amount of electricity while being honest and competitive!

[qq386437050]

Develop an .EXE window wallet as soon as possible to allow more people to participate and spread the word. Most people cannot understand the current mode of operation.

[CredaCash]

Develop an .EXE window wallet as soon as possible to allow more people to participate and spread the word. Most people cannot understand the current mode of operation.

There should be a GUI wallet within a few weeks, we'll definitely let you know...

[Alexander45]

  An unofficial group has been created in Telegram for the community where we can share experiences using CredaCash... share news and just chat.

  t.me/credacash_community

[Hashrateoptions]

Hey I am having a problem to open my old wallet geting an error :

[2024-10-19 17:01:48.460855] [0x000069e8] [error]   Database error 26 at ../src/walletdb.cpp:129 in "PRAGMA journal_mode = PERSIST;" --> file is not a database
[2024-10-19 17:01:48.474712] [0x000069e8] [error]   Database error 26 at ../src/walletdb.cpp:129 in "PRAGMA journal_mode = PERSIST;" --> file is not a database
error thread 0x69e8 assertz(dbexec(*db, "PRAGMA journal_mode = PERSIST;")) is 26 at ../src/walletdb.cpp:129
ERROR: error thread 0x69e8 assertz(dbexec(*db, "PRAGMA journal_mode = PERSIST;")) is 26 at ../src/walletdb.cpp:129
[2024-10-19 17:01:48.487784] [0x000069e8] [error]   Database error 26 at ../src/walletdb.cpp:892 in "PRAGMA synchronous = EXTRA;" --> file is not a database
[2024-10-19 17:01:48.500509] [0x000069e8] [error]   Database error 26 at ../src/walletdb.cpp:893 in "PRAGMA journal_mode = DELETE;" --> file is not a database
ERROR: ccwallet startup or initialization failed

[Alexander45]

Hey I am having a problem to open my old wallet geting an error :

I think it's enough to use before the launch _update_wallet.bat

[CredaCash]

Hey I am having a problem to open my old wallet geting an error :

[2024-10-19 17:01:48.460855] [0x000069e8] [error]   Database error 26 at ../src/walletdb.cpp:129 in "PRAGMA journal_mode = PERSIST;" --> file is not a database

The possibilities I can see are a configuration issue, or you're not using the correct wallet file, or the wallet file is corrupted.

I suggest download the sqlite tools from https://www.sqlite.org/download.html . Then extract the files and make sure you can run the program sqlite3.

Next, run ccwallet from the command line like this:

Code:

ccwallet.exe --conf=ccwallet.conf --trace=4

ccwallet will output some debugging info to the terminal. The second line should be "DbConn::OpenDbFile" with the full path of the wallet file.

Now try opening that same file using sqlite3, like this:

Code:

sqlite3 <full_path_to_wallet_file>

and if it opens, check the schema using the command:

Code:

.schema

and then try the command:

Code:

pragma integrity_check;

What do you see?