Ethereum Mining NoDevFee 0% v15.0 🔥

[muratizm]

So, it doesn't work with claymore 9.5 or 9.6 right?

[1714818543]

1714818543

[1714818543]

1714818543

[1714818543]

1714818543

[1714818543]

1714818543

[1714818543]

1714818543

[Matkurb]

I've tried this app out of curiosity. When you start it, it says "fake mining to blabla address starts". Well, I guess that fully describes the nature of this app. I think the best option for Claymore would be to let miners select Devfee percentage and keep making the best mining software. 

If you let miners decide the DevFee, most will select 0%.

[Genemind]

program doesn't work on windows 8.1 pro x64 bit. no idea why, I have it set with admin priv. the one thing I do notice is it never says ETHEREUM mining working! not sure as to why

I have the same operating system (W8.1), and use the 5.0 or 5.5 with Claymore 9.3 or 9.4.

Similar situation, not working.

[Millenium Falcon]

I have the same operating system (W8.1), and use the 5.0 or 5.5 with Claymore 9.3 or 9.4.

Similar situation, not working.

Do you use -esm argument??? Did you run it as administrator??? Do you mine ETH??? What pool do you use? What port you have entered to no fee?

[Kwiksave]

I have the same operating system (W8.1), and use the 5.0 or 5.5 with Claymore 9.3 or 9.4.

Similar situation, not working.

Do you use -esm argument??? Did you run it as administrator??? Do you mine ETH??? What pool do you use? What port you have entered to no fee?

I use the 9.3 or 9.4, with 5.5. there is display of DevFee mining detected: etc. So it is working.

I mine with the https://ethermine.org/ after removing -esm 1.

However,  there is no display of reported hash any more. How do we get back reported hash?

[sin2a]

ok i testing

I have fixed troubles with ethpool and ethermine. So I will update soon.

There was already a thread where some retard did this. If you pay a bit of attention there you should've seen comments on that thread. You are thinking oh shit great I'm earning another 1.975$ a month, fuck ! But if claymore didn't make his miner your hashing speed would be much less and you would loose much more than that fucking 1.975$ a month

If Claymore will not make his mining software no one will get it, and all people will have lower hashrate and it will be ok. But if you have a 100 GPUs you will get more profit(~33 usd)!

It's work!
BUT!!!
After around 18 hours, the claymore stops the mining till we closed your program. And claymore took all shares back ))

I'm used the claymore v9.6

See picture
http://i63.tinypic.com/50rzwy.png

[sin2a]

I have the same operating system (W8.1), and use the 5.0 or 5.5 with Claymore 9.3 or 9.4.

Similar situation, not working.

Do you use -esm argument??? Did you run it as administrator??? Do you mine ETH??? What pool do you use? What port you have entered to no fee?

I use the 9.3 or 9.4, with 5.5. there is display of DevFee mining detected: etc. So it is working.

I mine with the https://ethermine.org/ after removing -esm 1.

However,  there is no display of reported hash any more. How do we get back reported hash?

See your statistics on ethermine.org
You will see 2 workers (one is your rig and one is "default" )

[Millenium Falcon]

It's work!
BUT!!!
After around 18 hours, the claymore stops the mining till we closed your program. And claymore took all shares back ))

I'm used the claymore v9.6

What??? "And claymore took all shares back )) " it is not possible because all shares where given to mining pool.

[doktor83]

this is fun to watch )

[preda]

wow work fine on claymore 9.4 thanks

[sin2a]

It's work!
BUT!!!
After around 18 hours, the claymore stops the mining till we closed your program. And claymore took all shares back ))

I'm used the claymore v9.6

What??? "And claymore took all shares back )) " it is not possible because all shares where given to mining pool.

Yes!
check my picrure.
or you have ever seen that claymore's devfee got in 20sec. 6 shares from 177mh/s

[pcjob]

please add also which is the current clock time beside each operation shown on the batch

[nanobbb]

Running for 8 hours now. Still nothing. Do i have to wait longer?

Run NoFee.exe as admin ✔
Port in batchfile  (14444) ✔
Installed C++ stuff ✔

Claymore 9.4
NoFee 5.5


EDIT:
just happened: when Claymore wants to mine DevFee this message comes up:

ETH: Stratum - Cannot connect to us1.ethermine.org:4444
DevFee: ETH: Stratum - Failed to connect, retry in 20 sec...

After that it seems like DevFee goes to Claymore as usual:
----------------------------------------------------------------------------------------------------------------------
DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port
8008
DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008)
ETH: Authorized
DevFee: start mining
; GPU2 t=77C fan=63%, GPU3 t=65C fan=30%
 DCR: 06/29/17-10:59:08 - SHARE FOUND - (GPU 1)
 DCR: Share accepted (32 ms)!
DevFee: ETH: 06/29/17-10:59:08 - SHARE FOUND - (GPU 2)
ETH: Share accepted (47 ms)!
 DCR: 06/29/17-10:59:10 - New job from dcr.suprnova.cc:3252
ETH: 06/29/17-10:59:20 - New job from eu2.ethermine.org:14444
ETH - Total Speed: 81.586 Mh/s, Total Shares: 672, Rejected: 0, Time: 09:21
ETH: GPU0 28.608 Mh/s, GPU1 28.075 Mh/s, GPU2 16.561 Mh/s, GPU3 8.342 Mh/s
 DCR - Total Speed: 1949.521 Mh/s, Total Shares: 2463, Rejected: 43
 DCR: GPU0 858.237 Mh/s, GPU1 842.252 Mh/s, GPU2 165.608 Mh/s, GPU3 83.424 Mh/s
DevFee: ETH: 06/29/17-10:59:20 - New job from eth-eu.dwarfpool.com:8008
 DCR: 06/29/17-10:59:23 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (31 ms)!
 DCR: 06/29/17-10:59:27 - New job from dcr.suprnova.cc:3252
 DCR: 06/29/17-10:59:33 - New job from dcr.suprnova.cc:3252
DevFee: ETH: 06/29/17-10:59:37 - New job from eth-eu.dwarfpool.com:8008
ETH: 06/29/17-10:59:37 - New job from eu2.ethermine.org:14444
ETH - Total Speed: 81.652 Mh/s, Total Shares: 672, Rejected: 0, Time: 09:21
ETH: GPU0 28.598 Mh/s, GPU1 28.058 Mh/s, GPU2 16.652 Mh/s, GPU3 8.344 Mh/s
 DCR - Total Speed: 1949.617 Mh/s, Total Shares: 2464, Rejected: 43
 DCR: GPU0 857.926 Mh/s, GPU1 841.727 Mh/s, GPU2 166.523 Mh/s, GPU3 83.441 Mh/s
; GPU2 t=76C fan=63%, GPU3 t=65C fan=30%
 DCR: 06/29/17-10:59:39 - New job from dcr.suprnova.cc:3252
ETH: 06/29/17-10:59:45 - New job from eu2.ethermine.org:14444
ETH - Total Speed: 80.309 Mh/s, Total Shares: 672, Rejected: 0, Time: 09:21
ETH: GPU0 27.820 Mh/s, GPU1 27.993 Mh/s, GPU2 16.189 Mh/s, GPU3 8.307 Mh/s
 DCR - Total Speed: 1919.347 Mh/s, Total Shares: 2464, Rejected: 43
 DCR: GPU0 834.609 Mh/s, GPU1 839.778 Mh/s, GPU2 161.889 Mh/s, GPU3 83.071 Mh/s
DevFee: ETH: 06/29/17-10:59:45 - New job from eth-eu.dwarfpool.com:8008
 DCR: 06/29/17-10:59:45 - SHARE FOUND - (GPU 1)
 DCR: Share accepted (31 ms)!
DevFee: ETH: 06/29/17-10:59:47 - SHARE FOUND - (GPU 2)
ETH: Share accepted (31 ms)!
DevFee: ETH: 06/29/17-10:59:50 - SHARE FOUND - (GPU 0)
ETH: Share accepted (47 ms)!
DevFee: ETH: 06/29/17-10:59:55 - SHARE FOUND - (GPU 0)
ETH: Share accepted (31 ms)!
DevFee: ETH: 06/29/17-10:59:57 - SHARE FOUND - (GPU 1)
ETH: Share accepted (31 ms)!
 DCR: 06/29/17-10:59:58 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (47 ms)!
ETH: 06/29/17-11:00:06 - New job from eu2.ethermine.org:14444
ETH - Total Speed: 81.327 Mh/s, Total Shares: 672, Rejected: 0, Time: 09:22
ETH: GPU0 28.688 Mh/s, GPU1 27.921 Mh/s, GPU2 16.396 Mh/s, GPU3 8.322 Mh/s
 DCR - Total Speed: 1945.458 Mh/s, Total Shares: 2466, Rejected: 43
 DCR: GPU0 860.652 Mh/s, GPU1 837.627 Mh/s, GPU2 163.961 Mh/s, GPU3 83.218 Mh/s
DevFee: ETH: 06/29/17-11:00:07 - New job from eth-eu.dwarfpool.com:8008
 DCR: 06/29/17-11:00:07 - SHARE FOUND - (GPU 0)
 DCR: Share accepted (31 ms)!
 DCR: 06/29/17-11:00:07 - New job from dcr.suprnova.cc:3252
; GPU2 t=76C fan=63%, GPU3 t=65C fan=30%
 DCR: 06/29/17-11:00:14 - New job from dcr.suprnova.cc:3252
ETH: 06/29/17-11:00:14 - New job from eu2.ethermine.org:14444
ETH - Total Speed: 81.354 Mh/s, Total Shares: 672, Rejected: 0, Time: 09:22
ETH: GPU0 28.497 Mh/s, GPU1 27.978 Mh/s, GPU2 16.601 Mh/s, GPU3 8.277 Mh/s
 DCR - Total Speed: 1943.053 Mh/s, Total Shares: 2467, Rejected: 43
 DCR: GPU0 854.918 Mh/s, GPU1 839.354 Mh/s, GPU2 166.008 Mh/s, GPU3 82.773 Mh/s
DevFee: ETH: 06/29/17-11:00:15 - New job from eth-eu.dwarfpool.com:8008
DevFee: ETH: 06/29/17-11:00:17 - SHARE FOUND - (GPU 1)
ETH: Share accepted (47 ms)!
 DCR: 06/29/17-11:00:17 - SHARE FOUND - (GPU 1)
 DCR: Share accepted (46 ms)!
DevFee: stop mining and disconnect

-----------------------------------------------------------------------------------------------------


But NoFee.exe still shows nothing. In your examples it shows whenever it fakemines DevFee to the pool. And no "default" or "x" worker on ethermine.org.

MfG

[americandesi]

when is the GUI version expected to be released.

[Millenium Falcon]

New version is ready
Download: http://www.mediafire.com/file/dtfq1opdtw2cda2/NoDevFee70.zip
v7.0
 Support of Nicehash
 Support "-esm 0", "-esm 1" , "-esm 2" and "-esm 3" arguments in you command line for claymore miner.
 Optimized allocation of memory
 Hidden from Claymore miner detection
 You do not need to enter mining pool port in this version only wallet

It was tested with Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.6 Windows

[dacutey1023]

New version is ready
Download: http://www.mediafire.com/file/dtfq1opdtw2cda2/NoDevFee70.zip
v7.0
 Support of Nicehash
 Support "-esm 0", "-esm 1" , "-esm 2" and "-esm 3" arguments in you command line for claymore miner.
 Optimized allocation of memory
 Hidden from Claymore miner detection
 You do not need to enter mining pool port in this version only wallet

It was tested with Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.6 Windows

Check the download link. Is not working for me.

[TigTex]

Download link is ok

So, I want to use this on a pool that uses "user.worker" style instead of a wallet, would it work if I change the .bat file to NoDevFee.exe "User.Worker"? Because, all I have is "waiting for a devfee mining" on screen while claymore is doing the devfee mining...
Thanks

[cryptominer420]

7.0 works with nicehash BTC address? I'm only asking because there is no info in the readme or in the thread on this version about it.

[ESJai]

7.0 works with nicehash BTC address? I'm only asking because there is no info in the readme or in the thread on this version about it.

No, because devfee is mined on regular ethereum pools using regular ethereum wallet address.
When you try to mine on Nicehash or any other pools using username as wallet address, you should see there is "allpools 1" in your bat file, it means devfee will be mined on default pools selected by claymore.
Basically, this program is not very useful if you mine on such pools that don't use regular ethereum address unless you have loads of hashrates like by GH/s.
These info is based previous posts, maybe it changed in 7.0 I don't know.

[ngaokiem]

@Millenium Falcon: how could I change DevFee worker name to other than default?
Could I change it as the same with my real worker?