Ethereum Mining NoDevFee 0% v15.0 🔥

[HardFireMiner]

@Millenium Falcon, I have seen some bad comments over here about you, please ignore them they are either to stupid to use it or just affiliated to claymore somehow.

Great Job! I am mining for 1 week, everything works great, all shares that are mining when DevFee starts goes to my eth wallet, except the third one, I guess that is to bypass the claymore's check.

Be careful if you want to upgrade to claymore's new version, i don't know if there is any, I am sure right now I won't upgrade. Only if there will be a significant increase in miner effectiveness or on Fee.

Keep up the good work, you are a true fellow miner, old-school, honest. Some years ago crypto was about fairness and equity, now all this are a myth, a forgotten story, a legend.

It is very sad, greedy and sad, this is the crypto now.

[1715626680]

1715626680

[1715626680]

1715626680

[1715626680]

1715626680

[1715626680]

1715626680

[Yoelzz]

I do not understand the reason for so many people to remove the developer's gain?
if you are so good why do not you build a miner, fast and stable?


have you noticed that you are a newbie, who do you think will follow you on your project? I certainly do not.

best wishes for your work, so if you can call

Hi. You can read my previous topics and see that it is not a virus. However, you can use Wireshark program and see that it works as i told. You can set another wallet and see that profit goes toyou. And I made this program for me,at first. I do not ask you to use it. You can download it when I will be Legendary)

i love this guy, i just tried ur program..
indeed u r already a legendary for me now XD

[cryptolelefla]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

[doktor83]

I guess that is to bypass the claymore's check.

what check ?

[HardFireMiner]

I guess that is to bypass the claymore's check.

what check ?

Claymore has a check on third share to his DevFee address, if it doesn't go to his address something happens (lower hashrate) or something like that, I am not sure, just a guess.

[HardFireMiner]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

I don't know, maybe if you haven't mined a share while dev fee was ongoing, it is not showing as it is counting only when shares are submitted. Do you get a message in NoFee of Millenium Falcon when devfee in claymore starts? If not, something is wrong, if yes, it works.

[cryptolelefla]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

I don't know, maybe if you haven't mined a share while dev fee was ongoing, it is not showing as it is counting only when shares are submitted. Do you get a message in NoFee of Millenium Falcon when devfee in claymore starts? If not, something is wrong, if yes, it works.

this what App says:
Ethereum Mining detected to another wallet that you entered
DevFee Mining Detected: Fake DevFee Mining to : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

[HardFireMiner]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

I don't know, maybe if you haven't mined a share while dev fee was ongoing, it is not showing as it is counting only when shares are submitted. Do you get a message in NoFee of Millenium Falcon when devfee in claymore starts? If not, something is wrong, if yes, it works.

this what App says:
Ethereum Mining detected to another wallet that you entered
DevFee Mining Detected: Fake DevFee Mining to : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

Great, now you have to wait when you will actually mine a share while DevFee is mining. If you will find any share, it will go to the wallet you entered, if it is the same address that you use for ethermine pool, it will go straight to that address in ethermine, if you chose a new address, it will go to the pool where the DevFee connects - dwarf pool or maybe other, I have seen only dwarf. If that is the case, go to that pool (dwarf or other displayed while DevFee starts), enter your address and look for your stats.

https://dwarfpool.com/eth/address?wallet=0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

This is your mining at dwarf pool, if you haven't mined before here, I assume those are your shares that comes from NoDevFee.

Good luck, fellow miner!

[cryptolelefla]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

I don't know, maybe if you haven't mined a share while dev fee was ongoing, it is not showing as it is counting only when shares are submitted. Do you get a message in NoFee of Millenium Falcon when devfee in claymore starts? If not, something is wrong, if yes, it works.

this what App says:
Ethereum Mining detected to another wallet that you entered
DevFee Mining Detected: Fake DevFee Mining to : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

Great, now you have to wait when you will actually mine a share while DevFee is mining. If you will find any share, it will go to the wallet you entered, if it is the same address that you use for ethermine pool, it will go straight to that address in ethermine, if you chose a new address, it will go to the pool where the DevFee connects - dwarf pool or maybe other, I have seen only dwarf. If that is the case, go to that pool (dwarf or other displayed while DevFee starts), enter your address and look for your stats.

https://dwarfpool.com/eth/address?wallet=0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

This is your mining at dwarf pool, if you haven't mined before here, I assume those are your shares that comes from NoDevFee.

Good luck, fellow miner!

Thanks  for reply. That address Is different from mine (i have entered mine in the .Bat file)

[return_zer0]

Thanks for  this software
wondering is it working with other coin
for Exp
mining DBIX , EXP , ETC ? is  the submit shares will go to mining pool  ?

[return_zer0]

Thanks for  this software
wondering is it working with another coin
for Exp
mining DBIX , EXP , ETC ? is  the submit shares will go to mining pool  ?

I used this command :

Code:

EthDcrMiner64.exe -epool dbix.pool.sexy:7007 -ewal {DBIX wallet] -esm 0 -mode 1 -allcoins 1

 my question
so that work fine ?

[drdada]

Claymore has a check on third share to his DevFee address, if it doesn't go to his address something happens (lower hashrate) or something like that, I am not sure, just a guess.

I will sniff the outgoing traffic to see if there is something like this. But i think Claymore use other tricks to spot a cheater. Because all the devfee work is referenced with the same worker name. (see here https://eth.nanopool.org/account/0xc1c427cd8e6b7ee3b5f30c2e1d3f3c5536ec16f5 ) So he can't differentiate the status afterwards.
If someone have an idea how can we make sure we are not detected as cheater (except rely on the pool, which is fluctuant on luck) or what are the technique used to spot the cheat, i'm very interested for an alternate open-source project.

[don.ton]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

I don't know, maybe if you haven't mined a share while dev fee was ongoing, it is not showing as it is counting only when shares are submitted. Do you get a message in NoFee of Millenium Falcon when devfee in claymore starts? If not, something is wrong, if yes, it works.

this what App says:
Ethereum Mining detected to another wallet that you entered
DevFee Mining Detected: Fake DevFee Mining to : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

It seems to me it's a scam.
Doesn't matter what ETH address do you write to your BAT file, it will mine to this address always : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

https://pasteboard.co/GzqiXCn.png

And will put this ETH address to the startup BAT file with every start of the program.

[Jackblow33]

Thank you very much Claymore for the best miners, you deserve that 1-2%, and now you must have made alot of $$, congratulation!!! Not affiliated at all with Claymore. Never ever Im gonna release and support a piece of code for free, been there done that..... Coding=75% wasted time and effort to idiotproof something working perfectly when used properly!!! A lil suggestion: stop wasting your money on overprice gpus and pay your 1-2% while you can. We call that gratitude . You want a miner with support then pay for that, nothing is free in this world. Do whatever you want, I dont ******* care!!! You have your opinion too, but...Not every pieces of code have to be published....Or at least not here, you show no respect at all doing this here. Opinion that pretend that everything related to Crypto$$$ should be free should be questioned? How and why you trade your Crypto$$$ for fiat... Crypto$$$ not yet used properly, were not there yet, simply.


Btw heres a scoop: Im waiting for NoDevFee v102.04 to be released.....


##################
### NoDevFee v102.04###
##################

- + 30% hashing rate (stealing shares from others, proxy based wallet hack)
- Pump and dump pool. (hint ;-))
- Free for all users: Magic Ico tokens.


Enjoy your ride!

:-)))

[Millenium Falcon]

After mining overnight on Ethermine I doesn't see any extra worker and returning fees. Where i'm wrong

I don't know, maybe if you haven't mined a share while dev fee was ongoing, it is not showing as it is counting only when shares are submitted. Do you get a message in NoFee of Millenium Falcon when devfee in claymore starts? If not, something is wrong, if yes, it works.

this what App says:
Ethereum Mining detected to another wallet that you entered
DevFee Mining Detected: Fake DevFee Mining to : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF

It seems to me it's a scam.
Doesn't matter what ETH address do you write to your BAT file, it will mine to this address always : 0x783231dEBa1FaFd90b4F146fDB21a374C29737fF


And will put this ETH address to the startup BAT file with every start of the program.

Ok, show your bat file. That output is used only if you run it without wallet argument

[Net-Spacy]

Ok, show your bat file. That output is used only if you run it without wallet argument

I can confirm this - you will see the output and the changed startup file if you add a port as recommended by you - if you leave the port from the bat file - no information will create to your wallet.

Example: if you add:

start NoDevFee <WalletID> <port>

to the .bat-file - the startup script was created.

If you remove <port> and delete the startup - no new startup file was created and no WalletID was changed in the file.

[Millenium Falcon]

it was recommended till v5.5
please use only "./nofee 0xYou_ETH_WALLET" in v7.1

[Net-Spacy]

it was recommended till v5.5
please use only "./nofee 0xYou_ETH_WALLET" in v7.1

I see - but the startup script is not existing anymore in 7.1 as it looks? Is the application usable with dwarfpool too? Or only with nanopool?

[erzhan89]

Nice done! 24 hours works good!

[Net-Spacy]

Nice done! 24 hours works good!

I was try to leave the NoDevFee running and this morning i got:
--
DevFee: ETH: 07/05/17-07:51:15 - SHARE FOUND - (GPU: 4)
...
DevFee: stop mining and disconnect
--
As it looks: your tool was detected?