💥SOLARIS PLATFORM [XLR] 💥Swapping to FinaToken

[SolarisDev]

Im going to contact with Cryptopia today evening so hopefully they will answer Monday morning.  Thank you for your support !

We are looking forward to building our community  ! 
Check us out at https://twitter.com/SolarisCoin and click the follow button to stay up to date on the latest happenings.

[vonasek]

www.Cryptopool.tk

No registration needed, just use your wallet address as username and no password needed.
FEES 1%

stratum+tcp://cryptopool.tk:PORT -u YOURWALLETHERE -p x
Port: 3048, Diff: 0.0001   |   Port: 4048, Diff: 0.002   |   Port: 5048, Diff: 0.04   |   Port: 6048, Diff: 0.1


Payouts are every 20 mins after blocks has been confirmed. 
Twitter: https://twitter.com/cryptopool_tk

[kangwie]

Im going to contact with Cryptopia today evening so hopefully they will answer Monday morning.  Thank you for your support !

We are looking forward to building our community  ! 
Check us out at https://twitter.com/SolarisCoin and click the follow button to stay up to date on the latest happenings.

good news dev.

[ogtk]

Im going to contact with Cryptopia today evening so hopefully they will answer Monday morning.  Thank you for your support !

We are looking forward to building our community  ! 
Check us out at https://twitter.com/SolarisCoin and click the follow button to stay up to date on the latest happenings.

you only have to pay the 1000000DOT fee and we are listed on cryptopia

[AristoV300]

Dev please consider Yobit . Is nearly the same price as Cryptopia ( yobit 0.5  BTC vs Cryptopia 2 000 000  DOT ~ 0.5BTC).
Yobit have bigger volume. I know some people complain about Yobit that is scam , they have maintenance wallet very long time ... What you think guys ?

[tony_crunk]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD

it's correct for solo mining?

[RKen]

Dev please consider Yobit . Is nearly the same price as Cryptopia ( yobit 0.5  BTC vs Cryptopia 2 000 000  DOT ~ 0.5BTC).
Yobit have bigger volume. I know some people complain about Yobit that is scam , they have maintenance wallet very long time ... What you think guys ?

Cryptopia or Yobit I think there is no problem

[ogtk]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD

it's correct for solo mining?

no mining=1

[szachta]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD

it's correct for solo mining?

rpcuser= adress from wallet , -u adress from wallet, open wallet before minning for solo minning.

[tony_crunk]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD

it's correct for solo mining?

no mining=1

with and without "Mining=1"
I receive the message "No suitable long-poll found for http://127.0.0.1:18921"
and i do not find blocks

[dutch_loneranger]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD

it's correct for solo mining?

no mining=1

with and without "Mining=1"
I receive the message "No suitable long-poll found for http://127.0.0.1:18921"
and i do not find blocks

if you receive that message that means you are solo mining and it takes a while and a little luck too find a block , depends with how much  power you are mining  .

[dutch_loneranger]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD
....

rpcuser= adress from wallet , -u adress from wallet, open wallet before minning for solo minning.

N00b question, but this is driving me crazy.  I've copied/pasted wallet address to rpcuser and rpcpassword.  Should I leave rpcpassword blank in the .conf file located in %appdata%?  When I launch the miner, I get "127.0.0.1 slow/down..." error message.

My wallet is running fine.  My .conf file in %appdata% looks just like the above example.  Thank you.

did you make that  config file  when wallet is open ?  try too restart you wallet and try again because i see you use the same conf. as the other one and it works for him  . 

[R0mi]

hello,
I've setup my solariscoin.conf with:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.19

and my miner command line with:

sgminer.exe -k nist5 -o 127.0.0.1:18921 -u USER -p PASSWD
....

rpcuser= adress from wallet , -u adress from wallet, open wallet before minning for solo minning.

N00b question, but this is driving me crazy.  I've copied/pasted wallet address to rpcuser and rpcpassword.  Should I leave rpcpassword blank in the .conf file located in %appdata%?  When I launch the miner, I get "127.0.0.1 slow/down..." error message.

My wallet is running fine.  My .conf file in %appdata% looks just like the above example.  Thank you.

did you make that  config file  when wallet is open ?  try too restart you wallet and try again because i see you use the same conf. as the other one and it works for him  . 

Okay, that works!  Thank you very much.

[SolarisDev]

Its glad to see that this community is growing steadily and members help each other. 
I was away from my desk. Thanks @vonasek for the pool. Thanks @dutch_loneranger ,@szachta, @ogtk for the help .
Finally welcome  all new miners ! 

[SolarisDev]

DEV Waiting for exchange!

We definitely need exchange.   Please stay tuned .

[lex_201]

Hi I am trying to start mine solo with cpuminer on Ubuntu 16 but cpuminer just throws errors

my config file

Code:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.1

start miner with

Code:

./cpuminer -a nist5 -o 127.0.0.1:18921 -u SOLARISCOINADDR -p SOLARISCOINADDR

and all I get is error:

Code:

[2017-03-19 17:19:43] 8 miner threads started, using 'nist5' algorithm.
[2017-03-19 17:19:45] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:19:45] getblocktemplate failed, falling back to getwork
[2017-03-19 17:19:46] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:19:46] json_rpc_call failed, retry after 10 seconds
[2017-03-19 17:19:57] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:19:57] json_rpc_call failed, retry after 10 seconds
[2017-03-19 17:20:08] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:20:08] json_rpc_call failed, retry after 10 seconds

I have internet connection, no problem

I assume the correct method is
1. Start Wallet - solariscoin-qt
2. Start Miner - cpuminer-multi

thank you for any help  

[tony_crunk]

Hi I am trying to start mine solo with cpuminer on Ubuntu 16 but cpuminer just throws errors

my config file

Code:

rpcallowip=127.0.0.1
rpcport=18921
rpcuser=USER
rpcpassword=PASSWD
daemon=1
server=1
listen=1
mining=1
addnode=185.183.99.171
addnode=185.183.99.1

start miner with

Code:

./cpuminer -a nist5 -o 127.0.0.1:18921 -u SOLARISCOINADDR -p SOLARISCOINADDR

and all I get is error:
[code][2017-03-19 17:19:43] 8 miner threads started, using 'nist5' algorithm.
[2017-03-19 17:19:45] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:19:45] getblocktemplate failed, falling back to getwork
[2017-03-19 17:19:46] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:19:46] json_rpc_call failed, retry after 10 seconds
[2017-03-19 17:19:57] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:19:57] json_rpc_call failed, retry after 10 seconds
[2017-03-19 17:20:08] JSON decode failed(1): '[' or '{' expected near '<'
[2017-03-19 17:20:08] json_rpc_call failed, retry after 10 seconds

I have internet connection, no problem

I assume the correct method is
1. Start Wallet - solariscoin-qt
2. Start Miner - cpuminer-multi

thank you for any help  

rpcuser is the same of -u in miner option (-u is --user)
rpcpassword is the same of -p in miner option (-p is --password)
[/code]

[lex_201]

Thank you!

That was it, I had to make sure the .config and the miner had the same user and password (duh) 

[ArdiPrabowo]

premine 1%  waiting airdrop

premine 1 % i think is very low
maybe not open about airdop , or free distribution coin, so if you want get solaris coin only use mining, because until now not ready added in exchanger

[AristoV300]

premine 1%  waiting airdrop

premine 1 % i think is very low
maybe not open about airdop , or free distribution coin, so if you want get solaris coin only use mining, because until now not ready added in exchanger

 hope we have some exchange today.