Hashrate RX 570

[Piskeante]

just and update (weird though)

my RX 570 nitro+ 8gb 1240mhz core 2250 mem (micron)was doing 31.4mh/s with blockchain drivers. With last adrenaline drivers is doing 31.9 rock solid no errors.

Will have to test more but it seems latest drivers are increasing hash performance. Voltage of this particular card (82.2% asic quality), is an amazing 830mv (will continue trying lower voltages)

[stonedgz]

i have 2 rx 570 4gb red devils

when mining ethash i get around 27m\s on both of them

1200-1950

but mining cryptonight

1 of then ash at 750h\s and the other one 450\h\s

i tried to play a little bit the cc and mc but 450 is the best i could get

anyone could tell me what's wrong ??

and can i pull more than this from this card


thank you in advance

[deksa]

Guys?
Anyone mining with AMD RX570 or RX 580?
Need the Xevan hashrate, or maybe you have info?
Thanks!

[kapetanos]

Hi there miners!
I recently started to mine Ethereum a month ago, but I have a problem and I think maybe you can help me with an advice.
My rig has 4 Sapphire rx 570 pulse 4 GB with Elpida mem.
I modified the BIOS in SRBPolaris with custom timing found on this forum.
I raised the mem freq to 2070 to 2120 (depending how much the card was able to handle).
I set the core to 1150 and the voltages to 850.
I am using Claymore 11.2 with only this in the start.bat:
EthDcrMiner64.exe -epool pool adress -ewal wallet.adress -epsw x -dcri 6
Immediately when i start the miner it gives me some errors in hwmonitor (mostly under 10 errors), but after this it gives me none.
My rig runs at 124.9mh and i never had a single rejected share!
But my problem is this: from time to tine (from 1 to 7 days), the rig either restarts or freezes (simply the desktop remains like it is and i can’t do nothing, even moving the mouse).
Did I undervolt it too much? Did I raised the mem freq to much? It is possible to be the PSU for the system (a no-name 450W cheap one, but worked good before)? What can i do? I would be grateful for any advice!
Thanks!

[Steamtyme]

Just putting this out there, as I did a first time BIOS mod on my first rig.

I was getting 24.5 MH/S while running my 5 card rig.

MSI Armor 570 8gb 3 of these and 2 of the MK2 versions. I used the BIOS on this forum and applied it to see.

https://anorak.tech/t/msi-rx-570-armor-oc-8gb-micron-memory/60541

I am now getting in the range of 30.5 MH/S

I still haven't gone over everything with a fine tooth comb but was ecstatic, as I thought I lost the memory lottery when I saw all my cards were Micron memory. In the end it was like adding another card to my 5 card rig with the improvements I've seen so far.

[Dzeronimo]

I know that usually it's not the best idea to change anything if everything works OK, but I recently switched from "Claymore 11.0 + Catalyst 18.2.1" to "Claymore 11.5 + Catalyst 18.3.1" and hash rate increased for approximately 0.6 Mh/s per card (from 28.7 to 29.3 on RX570). It's not much but it's free so it's better than nothing
All settings are the same as before so if you are using some old drivers and miner, maybe you should try new versions.

[martens81]

I wonder what kind of hash will the new device from the bitmain for the ether mining

[cero10]

Guys does a bios for a modded msi 570 8G micron work on an asus 570 micron 8G assuming the latter can hold the former's OC?

[Dzeronimo]

I would not suggest to use BIOS from another graphics card, even if it the same GPU and memory. Something can go wrong even if you use a proper BIOS. Imagine what could happen with a wrong BIOS. I guess that some people managed to do what you want to do, but... it's too risky IMHO.

[Marvell2]

I have that new mk2 msi 8gb 580, tow out of three cards wont even flash, the one that does freezes the rig
all micron memory too, any ideas?

I have one of thedd cards from before used the same rom and it works fine

[ak313]

asus rx570 expedition, 8x all hynix memory
bios edited by one click timing, core 1100, memory 2022, -181 undervolt @29.1 megahash eth, 830 cryptov7 monero
8x power draw at wall 1020 with all other parts of system
each gpu draws 80 + 35 watt for risers I guess

[dragonmike]

Guys, what hashrates are you getting for Lyra2z? I assume SGminer is the only miner for Windows.

[DesertMiner]

the fastest lyra miner is mkxminer

[preda]

asus rx570 expedition, 8x all hynix memory
bios edited by one click timing, core 1100, memory 2022, -181 undervolt @29.1 megahash eth, 830 cryptov7 monero
8x power draw at wall 1020 with all other parts of system
each gpu draws 80 + 35 watt for risers I guess

how you undervolt? i am using msi afterburner

[dragonmike]

the fastest lyra miner is mkxminer

No that one's for Lyra2rev2, not Lyra2z. I'm asking specifically for AMD RX 570 hashrate on Lyra2z... and I believe the only miner currently available on Windows is DJM34's SGminer fork.

[ermis1975]

How do you under volt gpu rx 570 ? I try to go down to 800 and system is stable for ETH but not for XMR.

[Bigdrago]

How do you under volt gpu rx 570 ? I try to go down to 800 and system is stable for ETH but not for XMR.

1150/825 2250/825 power limit -30

[ermis1975]

I try 1150/850 and when I mine XMR system crashes. With 910V its stable.

[Chipychop]

Guys, what do you think of this claymore config for gigabyte aorus rx 570 4gb with hynix mems?

-allcoins 1 -allpools 1 -fanmin 50 -fanmax 80 -cclock 1150 -mclock 2100 -cvddc 850 -mvddc 800 -dcri 40 -powlim -30


And what do you consider are good values for eth+xvg on these little beasts?


Thanks in advance

[Call_Me_Bambi]

Guys, what do you think of this claymore config for gigabyte aorus rx 570 4gb with hynix mems?

-allcoins 1 -allpools 1 -fanmin 50 -fanmax 80 -cclock 1150 -mclock 2100 -cvddc 850 -mvddc 800 -dcri 40 -powlim -30

And what do you consider are good values for eth+xvg on these little beasts?

Thanks in advance

The best card settings are pretty much on a card-by-card basis, even identical spec'd cards can have different best settings, trial and error is usually the way to find out what works best. As for dual mining, unless you have low (or free) electricity costs it's not worth it, the card will take more power, run hotter and burn out sooner.