KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 10, 2017, 08:56:34 AM Last edit: May 11, 2017, 05:32:43 AM by KikloV2 |
|
Kiklo's Premium Blockchain Snapshot ServiceYou will need a program that can uncompress rar files to access the files. example: http://rarlabs.com/download.htm Tech Tips: Always scan a download for Viruses before installing , one such service is https://www.virustotal.com .Our Blockchain Snapshots can be installed on a New or Already Working Wallet. SnapShots will install much Faster than the BootStraps.Difference between a Bootstrap vs a Snapshot.Instructions on How to Install a Bootstrap.dat file is on the very next Post. Instructions on How to Install a SnapShot is included when you click on the SnapShot Link in the following table. _______________________________________________________________________________ _____ Services for BlockChain SnapShotsDirect Link to Snapshot download Exact Date created included in the Snapshot Post SHA-256 Hash Generated so you can verify the File download matches the original created file. Snapshot & BootStrap Updated every 2 weeks Current Price is 250 thousand ZEIT per month per coin to add these options. (Only ZEIT Accepted) Direct Link to the top of this OP.[url=https://bitcointalk.org/index.php?topic=1910100.msg18953386#msg18953386]Kiklo's Premium Blockchain Snapshot Service [/url]
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 03:59:16 AM Last edit: May 11, 2017, 06:15:27 AM by KikloV2 |
|
How to install a Bootstrap.dat file After downloading and uncompressing the rar file , Start up your new Wallet software, after it opens, then Close it, (In windows , this allows the new wallet to create the folder under C:\Users\"username"\AppData\Roaming\WalletNameHere )Copy the bootstrap.dat file in the folder c:\Users\"username"\AppData\Roaming\ WalletNameHere (for Windows) or in the WalletNameHere data folder for other OSes. Now Start the New Wallet to import the BootStrap.dat , (Depending on your PC and the size of the bootstrap , this can take many hours) (You can watch the progress of the import by opening the folder c:\Users\"username"\AppData\Roaming\WalletNameHere and watch the blk0001.dat file size to see how close it is to the bootstrap.dat to get a feel for how much longer it might be) once finished it will then begin synchronization to retrieve any blocks found after the Bootstrap was created. (Tech Note, the wallet does not completely Open until it finishes the Import.) Bootstraps can be downloaded from the Blockchain Folder at https://mega.nz/#F!CJRnyDDL!vbYN-3mvj9RBE7Phl27Sjg
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 04:14:12 AM Last edit: May 11, 2017, 05:28:13 AM by KikloV2 |
|
ZEIT BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Latest Version 2.0.1.7 Gauntlet Windows: www.zeit-coin.net/beta/zeitcoin-qt.exeMacOS: http://zeit-coin.net/beta/zeitcoin-2017-gauntlet.dmgLinux : https://github.com/zeitcoin/zeitcoin_______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: ZeitBlockChainSnapShot-2017-05-10.rar SHA-256: B9D8F5E9A6ACEB4181452913A877BB8C00103D8D70A9D3708F673A6AF1DC1FBE Direct Link : https://mega.nz/#!GNYAHYjb!gnfY9OsKoE8aGvrf2bQlTT5j8fsZO2PQS12EtpN1t2cGeneral Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsghttp://onlinemd5.com can be used to verify the above checksums. NEW Wallet: Install Instructions Make a Zeitcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from ZeitcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Zeitcoin Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Zeitcoin is closed Go under c:\Users\"username"\AppData\Roaming\Zeitcoin (for Windows) or in the Zeitcoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from ZeitcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Zeitcoin Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot. Once your Zeit Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run zeitcoin-qt.exe -rescan will take a little while but should correct your balance info.List of Addnodes:https://chainz.cryptoid.info/zeit/#!networkClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 04:34:40 AM |
|
HOBONICKEL BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Version 1.5.1.0-gf46fa0c-V1.5 used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: HBNBlockChainSnapShot- (Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a HoboNickels folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from HBNBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\HoboNickels Then open HoboNickels-qt.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure HoboNickels is closed Go under c:\Users\"username"\AppData\Roaming\HoboNickels (for Windows) or in the HBN data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from HBNBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\HoboNickels Then open HoboNickel and it will start syncing the BlockChain from the last snapshot. Once your HBN Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run HoboNickels-qt.exe -rescan will take a little while but should correct your balance info.List of Addnodes:http://www.presstab.pw/phpexplorer/HBN/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 04:49:52 AM |
|
KOBOCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v2.1.0.3 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: KoboBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsghttp://onlinemd5.com can be used to verify the above checksums. NEW Wallet: Install Instructions Make a Kobocoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from KobocoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Kobocoin Then open Kobocoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Kobocoin is closed Go under c:\Users\"username"\AppData\Roaming\Kobocoin (for Windows) or in the Kobocoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from KobocoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Kobocoin Then open Kobocoin and it will start syncing the BlockChain from the last snapshot. Once your Kobocoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run kobocoin-qt.exe -rescan will take a little while but should correct your balance info.List of Addnodes:http://www.presstab.pw/phpexplorer/KOBO/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 04:56:38 AM |
|
SUPERCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 4.0.1.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: SupercoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg* File is over 1 Gig , Download with MegaSync *NEW Wallet: Install Instructions Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Supercoin Then open Supercoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Supercoin is closed Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from SupercoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Supercoin Then open Supercoin and it will start syncing the BlockChain from the last snapshot. Once your Supercoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Supercoin-qt.exe -rescan will take a little while but should correct your balance info.(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)List of Addnodes:https://chainz.cryptoid.info/super/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 05:20:09 AM |
|
SUPERCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 4.0.1.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: SupercoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg* File is over 1 Gig , Download with MegaSync *NEW Wallet: Install Instructions Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Supercoin Then open Supercoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Supercoin is closed Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from SupercoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Supercoin Then open Supercoin and it will start syncing the BlockChain from the last snapshot. Once your Supercoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Supercoin-qt.exe -rescan will take a little while but should correct your balance info.(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)List of Addnodes:https://chainz.cryptoid.info/super/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 06:27:32 AM |
|
BITBEAN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.1.0.0-g32a928eRC1 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: BitBeanBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a Bitbean folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BitBeanBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Bitbean Then open Bitbean and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Bitbean is closed Go under c:\Users\"username"\AppData\Roaming\Bitbean (for Windows) or in the Bitbean data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from BitbeanBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Bitbean Then open Bitbean and it will start syncing the BlockChain from the last snapshot. Once your Bitbean Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Bitbean-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://chainz.cryptoid.info/bitb/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 06:41:57 AM |
|
BTCTALKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.5.2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: BTCtalkBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a BTCtalkcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BTCtalkBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BTCtalkcoin Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure BTCtalkcoin is closed Go under c:\Users\"username"\AppData\Roaming\BTCtalkcoin (for Windows) or in the BTCtalkcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from BTCtalkcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BTCtalkcoin\ Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot. Once your BTCtalkcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run BTCtalkcoin-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://chainz.cryptoid.info/talk/#!networkhttps://novaexchange.com/addnodes/TALK/Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 06:48:21 AM |
|
SPROUTS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: SproutsBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsghttp://onlinemd5.com can be used to verify the above checksums. NEW Wallet: Install Instructions Make a Sprouts folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SproutsBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Sprouts Then open Sprouts and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Sprouts is closed Go under c:\Users\"username"\AppData\Roaming\Sprouts (for Windows) or in the Sprouts data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from SproutsBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Sprouts\ Then open Sprouts and it will start syncing the BlockChain from the last snapshot. Once your Sprouts Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Sprouts.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://www.coinexchange.io/network/peers/SPRTShttps://chainz.cryptoid.info/sprts/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 07:06:57 AM |
|
NOBLECOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.0.2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: NobleBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a NoblecoinPOS folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from NobleBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\NoblecoinPOS Then open Noblecoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Noblecoin is closed Go under c:\Users\"username"\AppData\Roaming\NoblecoinPOS (for Windows) or in the NoblecoinPOS data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from NobleBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\NoblecoinPOS\ Then open Noblecoin and it will start syncing the BlockChain from the last snapshot. Once your Noblecoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Noblecoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodeshttps://chainz.cryptoid.info/nobl/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 07:14:36 AM |
|
BLACKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.2.4 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: BlackcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a BlackCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BlackcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BlackCoin Then open Blackcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Blackcoin is closed Go under c:\Users\"username"\AppData\Roaming\BlackCoin (for Windows) or in the BlackCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from BlackcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BlackCoin Then open Blackcoin and it will start syncing the BlockChain from the last snapshot. Once your Blackcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Blackcoin-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://chainz.cryptoid.info/blk/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 07:21:53 AM |
|
BOTTLECAPS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.2.2.0-g418187240-Caps2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: BottlecapsBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a BottleCaps folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BottlecapsBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BottleCaps Then open BottleCaps and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Bottlecaps is closed Go under c:\Users\"username"\AppData\Roaming\BottleCaps (for Windows) or in the BottleCaps data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from BottlecapsBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BottleCaps\ Then open Bottlecaps and it will start syncing the BlockChain from the last snapshot. Once your BottleCaps Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Bottlecaps-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttp://www.presstab.pw/phpexplorer/CAP/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 08:20:40 AM |
|
SATIVACOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v1.3.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: SativacoinBlockchainSnapshot-2017-4-24.rar SHA-256: D0B1EC5D49D55D98DDD94C5D18E1D8A3984130E9BC4636A4C5CCC73581618DA5 Direct Link : https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fUGeneral Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsghttp://onlinemd5.com can be used to verify the above SHA-256 checksums. NEW Wallet: Install Instructions Make a Sativacoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SativacoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\sativacoin Then open Sativacoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Sativacoin is closed Go under c:\Users\"username"\AppData\Roaming\Sativacoin (for Windows) or in the Sativacoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from SativacoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\sativacoin Then open Sativacoin and it will start syncing the BlockChain from the last snapshot. Once your Sativacoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Sativacoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodeshttps://www.cryptopia.co.nz/BlockExplorer?coin=STVPremium Service Status => Active = SnapShot & BootStrap Updated Every 2 WeeksZEIT Address => MZYR3sPeVJPRbPfLoVyhjUMbcJxGhcajVD Click Here to See a List of All Available SnapShots.
|
|
|
|
KikloV2 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 11, 2017, 09:08:51 AM |
|
TRUCKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.0.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: TruckcoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a Truckcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from TruckcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Truckcoin Then open Truckcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Truckcoin is closed Go under c:\Users\"username"\AppData\Roaming\Truckcoin (for Windows) or in the Truckcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from TruckcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Truckcoin Then open Truckcoin and it will start syncing the BlockChain from the last snapshot. Once your Truckcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Truckcoin-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttp://www.presstab.pw/phpexplorer/TRK/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
|