|
Mattthev
|
|
June 27, 2017, 07:02:37 AM |
|
Yesterday I was able to run on my friend's Z270P 6x Asus Dual 1060 6GB with almost no problems. My Z270P was running 6x AMD 470/480 also very good, didn't test m.2.
|
|
|
|
rebelmalangi
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 27, 2017, 08:35:06 AM |
|
Hi Guys, I am new here and I was also having the same issue , till 2 GPUs Z270P was working fine but once I add my 3rd GPU windows was crashing. So I upgrade bios 1st to the latest version of now which is PRIME-Z270-P-ASUS-0610.CAP , For me also Internet download was not working so simply I install from usb stick.
1st : Upgrade BIOS to 610 version 2nd : Go Advanced ----> System Agent (SA) Configuration ----> Enable "Above 4 G Decoding" 3rd : DMI/OPI CONFIGURATION ---> DMI MAX LINK SPEED change to GEN1 4th : PEG PORT CONFIGURATION ---> PCIEX16_1 LINK SPEED change to GEN1
Thats all I did not change PCH CONFIGUTATION configuration like other bro did and for me now mining is stable and running without any windows crash etc. from last 20 hours.
Share is care. So keep sharing and keep Caring
Kudos Rebel
|
|
|
|
pzd3mir
Newbie
Offline
Activity: 26
Merit: 0
|
|
June 27, 2017, 10:00:52 AM |
|
Hi Guys, I am new here and I was also having the same issue , till 2 GPUs Z270P was working fine but once I add my 3rd GPU windows was crashing. So I upgrade bios 1st to the latest version of now which is PRIME-Z270-P-ASUS-0610.CAP , For me also Internet download was not working so simply I install from usb stick.
1st : Upgrade BIOS to 610 version 2nd : Go Advanced ----> System Agent (SA) Configuration ----> Enable "Above 4 G Decoding" 3rd : DMI/OPI CONFIGURATION ---> DMI MAX LINK SPEED change to GEN1 4th : PEG PORT CONFIGURATION ---> PCIEX16_1 LINK SPEED change to GEN1
Thats all I did not change PCH CONFIGUTATION configuration like other bro did and for me now mining is stable and running without any windows crash etc. from last 20 hours.
Share is care. So keep sharing and keep Caring
Kudos Rebel
I think it really depends on what Bios version you got. On earlier Bios I could run it halfway stable put all options on Gen3.
|
|
|
|
Mattthev
|
|
June 27, 2017, 11:53:29 AM |
|
I think it really depends on what Bios version you got. On earlier Bios I could run it halfway stable put all options on Gen3.
It can run only with 4G above enabled with 6 GPUs on 0610...
|
|
|
|
rebelmalangi
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 27, 2017, 08:27:25 PM |
|
Yesterday I was able to run on my friend's Z270P 6x Asus Dual 1060 6GB with almost no problems. My Z270P was running 6x AMD 470/480 also very good, didn't test m.2.
Hi Which Bios and setting you used for your rig.
|
|
|
|
Mattthev
|
|
June 28, 2017, 06:21:16 AM |
|
Hi Which Bios and setting you used for your rig.
4G above, 0608
|
|
|
|
Hkow
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 29, 2017, 10:04:16 PM |
|
Try during 8h to have my 6th GPU reconnized but not works.. Only 5 GPU is detected on W10..
I Start thinking to change the Motherboard but when i see its working for some people, im so frustated..
|
|
|
|
pipmatic
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 01, 2017, 04:38:22 AM |
|
Hello Friends,
has anybody managed to make 8 gpus work on this Asus Prime Z270-P. I have connected 7th and 8th gpu to the M.2 to PCI-e convertor but did not manage to see them added in device manager (windows 10).
Any Bios settings I need to change ?
I am using latest Bios 0808 released on 23-07-17.
Thank you.
|
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 01, 2017, 08:48:24 AM |
|
I'm getting crazy with this mobo (Asus prime z270-p)
I was really happy when I saw this thread that a lot of people managed to get their rig working but unfortunately I am not able to get it up and running with more than 4 GPUs. My last hope is that one of you can give me another tip. I tried already the following:
- BIOS upgrade to version 0808 - 4g is enabled and everything is working up to 4 GPUs - DMI/OPI, PEG Port and PCI-E: tried Auto, Gen1 and Gen2 in all combinations - Onboard Sound, Serial, SATA and USB is disabled
Any Idea what I'm doing wrong?
Any help is appreciated.
|
|
|
|
btcmaker21
Member
Offline
Activity: 71
Merit: 10
|
|
July 01, 2017, 09:21:15 AM |
|
have u tried to disable 4G like suggested here ?
|
|
|
|
mewhoyou
|
|
July 01, 2017, 10:12:15 AM |
|
Hello Friends,
has anybody managed to make 8 gpus work on this Asus Prime Z270-P. I have connected 7th and 8th gpu to the M.2 to PCI-e convertor but did not manage to see them added in device manager (windows 10).
Any Bios settings I need to change ?
I am using latest Bios 0808 released on 23-07-17.
Thank you.
got it to work but will need to reset daily as the motherboard does not have sufficient power
|
Ethereum the Next Big Thing?
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 01, 2017, 11:04:36 AM |
|
have u tried to disable 4G like suggested here ?
With 4G disabled I am only able to get up and running with 2 cards......... As soon as I insert the 3th one I see only a cursor blinking. Not even possible to enter the BIOS. With 4G enabled I can get up and running with 4 cards.......... Any other ideas?
|
|
|
|
cryptobob88
Newbie
Offline
Activity: 10
Merit: 0
|
|
July 01, 2017, 04:37:41 PM |
|
I got 8 gpus (8x580s Strix) running on Z270P.. you need to be careful with how you install everything and making sure updates are turned of, a lot of the times, your drivers are updated, and theyre not compatible with 8 gpus. it took us 1 day but we finally managed to do it, and replicate it on 2 other rigs.
wts guide for 0.01613 btc, please pm
|
|
|
|
btcmaker21
Member
Offline
Activity: 71
Merit: 10
|
|
July 01, 2017, 05:26:05 PM |
|
have u tried to disable 4G like suggested here ?
With 4G disabled I am only able to get up and running with 2 cards......... As soon as I insert the 3th one I see only a cursor blinking. Not even possible to enter the BIOS. With 4G enabled I can get up and running with 4 cards.......... Any other ideas? Have u tried 4g disabled (with just one card installed) and adding Card 2 - Reboot - Card 3 - Reboot - Card 4 - Reboot - Card 5 Reboot ?
|
|
|
|
deadsix
|
|
July 01, 2017, 09:43:05 PM |
|
have u tried to disable 4G like suggested here ?
With 4G disabled I am only able to get up and running with 2 cards......... As soon as I insert the 3th one I see only a cursor blinking. Not even possible to enter the BIOS. With 4G enabled I can get up and running with 4 cards.......... Any other ideas? Have u tried 4g disabled (with just one card installed) and adding Card 2 - Reboot - Card 3 - Reboot - Card 4 - Reboot - Card 5 Reboot ? Or .... disable 4G, boot with 1 card, install it and then shutdown. Connect all the remaining cards, boot, enable 4G, voila.
|
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 02, 2017, 07:32:54 AM |
|
have u tried to disable 4G like suggested here ?
With 4G disabled I am only able to get up and running with 2 cards......... As soon as I insert the 3th one I see only a cursor blinking. Not even possible to enter the BIOS. With 4G enabled I can get up and running with 4 cards.......... Any other ideas? Have u tried 4g disabled (with just one card installed) and adding Card 2 - Reboot - Card 3 - Reboot - Card 4 - Reboot - Card 5 Reboot ? I tried that as well: 4 disabled with one card (ok) - reboot adding card 2 (ok) - reboot adding card 3 --> only a blinking cursor not even possible to enter the BIOS
|
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 02, 2017, 07:40:00 AM |
|
have u tried to disable 4G like suggested here ?
With 4G disabled I am only able to get up and running with 2 cards......... As soon as I insert the 3th one I see only a cursor blinking. Not even possible to enter the BIOS. With 4G enabled I can get up and running with 4 cards.......... Any other ideas? Have u tried 4g disabled (with just one card installed) and adding Card 2 - Reboot - Card 3 - Reboot - Card 4 - Reboot - Card 5 Reboot ? Or .... disable 4G, boot with 1 card, install it and then shutdown. Connect all the remaining cards, boot, enable 4G, voila. exactly the same issue: booting with 1 card and 4G disable is fine - after adding 4 more I can't enter the BIOS. I tried enabling 4G booting with one card - shutdown adding 4 more cards --> I can enter the BIOS but Windows is not booting. I never see a Windows logo or something and the screen is always switching between it looks like there will be a picture and back to there is no picture.........
|
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 02, 2017, 12:06:48 PM |
|
Update:
I did install Windows 10 from scratch with the following BIOS settings - 4G disabled - all onboard devices disabled - everything to Gen1
After some Windows Updates I did install the first card --> everything fine added the second card --> everything fine added the third one got an error before the bios removed the third one - changed 4G to enable --> everything fine added the 4th card --> everything fine added the 5th card --> Windows is starting but I have a "code 43" error in the device manager for the last card
I searched a lot for this error and it seems to be a common issue but only with older Windows versions (not Windows 10).
Changing from Gen1 to auto didn't change something. I am still able to boot Windows even with "auto" but still have the code 43 error.
Any idea how to fix that?
|
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
July 02, 2017, 07:55:12 PM |
|
@cryptobob88, thanks a lot for your help. We could figure out that my problem is pretty sure one GPU which is Fu**** up...... I learned a lot and his help was really professional I will receive another card tomorrow and should know after if it's working with 5 cards.
|
|
|
|
|