EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)

[Nokia555]

I'm looking for beta testers, i have Linux EthMonitoring OS ready for AMD cards (Nvidia needs some tests and good to go also).

Also i have new V20 EthControl waiting for testers.

Currently in testing features for EthControl v20 Windows
- Youtube guide for OC: https://www.youtube.com/watch?v=MIiSWqyZdo0
- Nvidia OC profiles
- Nvidia custom OC settings
- Nvidia FAN Curve settings
- AMD FAN Curve settings
- No AMD OC currently available

EthMonitoring OS AMD v0.1
- EthControl v2.0 Linux (of course supports remote deployment for custom ccminers, claymores etc)
- AMD OC profiles
- AMD OC custom settings
- AMD FAN curve settings
- AMD Power usage reporting (new)

EthMonitoring OS nVidia v0.1
- EthControl v2.0 Linux (of course supports remote deployment for custom ccminers, claymores etc)
- Nvidia OC profiles
- Nvidia OC custom settings
- Nvidia FAN Curve settings

Few screens about new interfaces:




If you want to start testing and join EthMonitoring community, join us in Discord: https://discordapp.com/invite/F4Y3RFC

[Sgsg666]

Hi guys, can someone tell me why i cant see wattage on version 0.0.34? srbminer.

[jimmykl]

Hi guys, can someone tell me why i cant see wattage on version 0.0.34? srbminer.

Probably best to jump on Discord (see link ^^)

[texasman86]

I was reading on another thread that SRBMiner is about to be added to ethcontrol. When possible, would you mind adding Solacecoin and Haven Protocol for tracking?

[Nokia555]

I was reading on another thread that SRBMiner is about to be added to ethcontrol. When possible, would you mind adding Solacecoin and Haven Protocol for tracking?

Hi, I'm adding new coins when i get this new version of EthControl out with AMD/Nvidia OC panels.

Hi guys, can someone tell me why i cant see wattage on version 0.0.34? srbminer.

AMD gpu-s don't report power usage currently, only nvidia.

[Nokia555]

All beta testers get free premium for 3 months for 3 rigs.

EthMonitoring OS v0.1 AMD is waiting for testers and also EthControl V20 Beta for Windows with Nvidia OC panel waiting for more users to test.

[Nokia555]

Nvidia EthMonitoring OS is also ready and waiting for beta testers now.

Includes:

- Fan curve
- OC Support
- Custom software deployment


Also EthControl v20 windows AMD OC is ready for testers.

[Nokia555]

How do I monitor EnemyMiner with EthMonitoring version 0.0.34?

"
 Latest news
2018-05-17 07:08:00   Added EnemyMiner 1.09b
"

Hello,

add as ccminer in EthMonitoring.

New sparkpool.com integration done for app:

[7h3235]

Hi There!

I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W

Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a

Thanks.

[Nokia555]

Hi There!

I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W

Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a

Thanks.

Hello,

Windows AMD does not report power usage, only linux with EthMonitoring OS does currently.

[nokia5556]

EthControl v20 Build v1014 released for public testing: https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20

- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner

[S_Natural]

EthControl v20 Build v1014 released for public testing: https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20

- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner

Nokia5556 

[nokia5556]

EthControl v20 Build v1014 released for public testing: https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20

- Supports AMD OC
- Supports Nvidia OC
- Supports SRBMiner

Nokia5556 

Yeah, my main account is locked, waiting for admins respond

[nokia5556]

EthMonitoring OS ready for public testing:

https://ethmonitoring.com/guide

- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.

[7h3235]

EthMonitoring OS ready for public testing:

https://ethmonitoring.com/guide

- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.

Hi there! Thank you for your previous answer and your good work.

I'm advancing in the tests, and it is working very well, except two things.

I have now three GPUs RX570 Rog Strix, and all have the same rom flashed on.
- One is in a riser, and it isn't working, keeps receiving jobs, but, only shows 0.000Mh/s (I'll replace the riser tomorrow)
- On the other two, I'm setting the values for the GPUs in the command as follow:

-cclock 1200,1200 -cvddc 850,850 -mclock 2075,2075 -mvddc 931,931

It applies the config for one GPU, and the other stays with ROM configs or Radeon Profile, if configured. On the logs I'm receiving the following messages:

00:33:50 domingo, 3 de junho de 2018 : Pulling config changes from API
00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
   em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0

Am I doing something wrong?

Thanks again!

[nokia5556]

EthMonitoring OS ready for public testing:

https://ethmonitoring.com/guide

- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.

Hi there! Thank you for your previous answer and your good work.

I'm advancing in the tests, and it is working very well, except two things.

I have now three GPUs RX570 Rog Strix, and all have the same rom flashed on.
- One is in a riser, and it isn't working, keeps receiving jobs, but, only shows 0.000Mh/s (I'll replace the riser tomorrow)
- On the other two, I'm setting the values for the GPUs in the command as follow:

-cclock 1200,1200 -cvddc 850,850 -mclock 2075,2075 -mvddc 931,931

It applies the config for one GPU, and the other stays with ROM configs or Radeon Profile, if configured. On the logs I'm receiving the following messages:

00:33:50 domingo, 3 de junho de 2018 : Pulling config changes from API
00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
   em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0

Am I doing something wrong?

Thanks again!

Hey,

Can you try this latest build 1017: https://github.com/JamesSmith2/EthControl/releases

[7h3235]

Hi, I'm using it right now with the Claymore v11.8

I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:

" = is not a valid Pstate number

or something like that, each time the miner was restart.

This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.

PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%

PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.

[nokia5556]

Hi, I'm using it right now with the Claymore v11.8

I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:

" = is not a valid Pstate number

or something like that, each time the miner was restart.

This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.

PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%

PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.

Hello,

Fixed pstate issue problem, it was happening when core state is empty in OC profile/custom oc list. Can you try this version.
https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20_1018

[7h3235]

Hi, I'm using it right now with the Claymore v11.8

I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:

" = is not a valid Pstate number

or something like that, each time the miner was restart.

This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.

PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%

PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.

Hello,

Fixed pstate issue problem, it was happening when core state is empty in OC profile/custom oc list. Can you try this version.
https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20_1018

Hi there!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.

So far, great job!

[nokia5556]

Added CCMiner v2.2.6 for PHI2