Ahead
Member
Offline
Activity: 74
Merit: 10
IT Solutions Architect
|
|
June 17, 2017, 06:10:35 AM |
|
So I've been playing around with this for the last couple days and still haven't been able to get past 22 my/s on the red dragon card. Anyone else deal with something like this?
What cards you have? rx470, rx480, rx570, rx580? (both RX580 right?) What memory size? 4G, 8G? What type of memory does the cards have? Samsung, Elpida, Hynix, Micron?
|
|
|
|
Reptar0nIce (OP)
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 17, 2017, 06:18:40 AM |
|
So I've been playing around with this for the last couple days and still haven't been able to get past 22 my/s on the red dragon card. Anyone else deal with something like this?
What cards you have? rx470, rx480, rx570, rx580? (both RX580 right?) What memory size? 4G, 8G? What type of memory does the cards have? Samsung, Elpida, Hynix, Micron? Both are RX 580's 8G. The Red Devil has Samsung, and the Red Dragon has Hynix.
|
|
|
|
Ahead
Member
Offline
Activity: 74
Merit: 10
IT Solutions Architect
|
|
June 17, 2017, 06:21:05 AM |
|
So I've been playing around with this for the last couple days and still haven't been able to get past 22 my/s on the red dragon card. Anyone else deal with something like this?
What cards you have? rx470, rx480, rx570, rx580? (both RX580 right?) What memory size? 4G, 8G? What type of memory does the cards have? Samsung, Elpida, Hynix, Micron? Both are RX 580's 8G. The Red Devil has Samsung, and the Red Dragon has Hynix. Then my guess is that you have done wrong bios mod. On 8GB cards you only copy the 1750 timing value to the 2000 timing value. Watch this video for more info.. --> https://www.youtube.com/watch?v=JKM60VVIfRgRemember to make changes to the factory default bios, not to the one you have already modded!
|
|
|
|
Mattthev
|
|
June 17, 2017, 06:46:44 AM |
|
Both are RX 580's 8G. The Red Devil has Samsung, and the Red Dragon has Hynix.
Use performance timings like Uber-Mix. In my signature there is link to the guide how to easy mod the bios with Uber-Mix timing for Samsung memory.
|
|
|
|
machinegunate
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 17, 2017, 07:48:51 AM |
|
I'm having the same issue with all my cards. If I touch anything on the memory or core clock the hashrate drops like a bowling ball. Currently running: radeon-crimson-relive-17.4.3 minimalsetup drivers PowerColor RED DRAGON Radeon RX 580 4gb (Hynix) Sapphire Radeon NITRO+ RX 580 4GB (Hynix) Sapphire Radeon PULSE RX 580 8GB (Hynix)
(ETH Only in Claymore v9,5) All the stock settings give me between 21-22mh/s on the 4 PULSE and RED DRAGON and 80% of the time will run @ 24mh/s on the NITRO+
I would love to see any kind of improvement before I try to mod the bios.
|
|
|
|
Ahead
Member
Offline
Activity: 74
Merit: 10
IT Solutions Architect
|
|
June 17, 2017, 07:57:15 AM |
|
I'm having the same issue with all my cards. If I touch anything on the memory or core clock the hashrate drops like a bowling ball. Currently running: radeon-crimson-relive-17.4.3 minimalsetup drivers PowerColor RED DRAGON Radeon RX 580 4gb (Hynix) Sapphire Radeon NITRO+ RX 580 4GB (Hynix) Sapphire Radeon PULSE RX 580 8GB (Hynix)
(ETH Only in Claymore v9,5) All the stock settings give me between 21-22mh/s on the 4 PULSE and RED DRAGON and 80% of the time will run @ 24mh/s on the NITRO+
I would love to see any kind of improvement before I try to mod the bios.
I think this is the best you can get with stock bios. Also Hynix memory is not the best. I have rx470 with Elpida memory and with Hinyx memory. Elpida is doing 1 Mh more than Hinyx cards, and it can run memory at higher clock speeds (50-100Mhz more)
|
|
|
|
va23boam
Member
Offline
Activity: 88
Merit: 10
|
|
June 18, 2017, 10:09:51 PM |
|
I really for the life of me can't figure out what the issue is. I'm trying to set up the Red Dragon itself. I copied the timings from 1500 to everything under it, yet it's still hashing at the same rate. I even copied the 1750 to 2000 as well. When I try to raise the memory clock up to 2100 it goes DOWN. This is one ETH mining only. Maybe I got a bum card?
Its 1500 up not down! - reedit the origional bios and do it correctly
|
Currently Mining: BTC,ETH,SC
|
|
|
padrinogtr
Full Member
Offline
Activity: 228
Merit: 100
Mine ON!!!
|
|
September 11, 2017, 04:11:01 AM |
|
im running two XFX RX 580 8gb on ethereum ubuntu 16.04 i cant get pass 39m/h together
any suggested watman settings will be apreciated
|
230TH Mining For Kano!!!
|
|
|
ikill4food2
Member
Offline
Activity: 126
Merit: 11
|
|
November 11, 2017, 06:15:28 PM Last edit: November 11, 2017, 07:22:30 PM by ikill4food2 |
|
Seeing this problem more and more I search for a solution. Been at this for a few days now.
I have 1 Sapphire RX 580 8GB NItro+ HiNyX card that won't get past 22mhz dual mining - ETC & LBC - no matter which bios I try, and any OC settings just make the hash worse. I have tried 4 or 5 different ones.
I have tried and double checked everything...My RX480 8GB Nitro+ Sapphire runs at same speed.
All threads to this problem seem to dead end, so I'm replying to this dead one in hopes someone found a solution?
Or were we lucky to get a bad batch of the last of rx 580 hinyx boards?
UPDATE: I have discovered some of these cards have *2* different mem manuf. - mine has BOTH Samsung & Hinyx - also had to use another version of Polaris Editor - SRBPolarisV3 allowed me too see the correct memory straps for each Samsung and Hinyx. Since none of the bios I downloaded made no improvements, I would try manually adjusting. I could not do this before, so I tried editing/copying the straps ... a few different combos tried on each pair. No improvement. Stuck again at same 22mhz hash rate ... no matter the strap copy combo... hash is even lower on the stock bios setting btw. 19mhz.
|
|
|
|
TotalChomper
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 02, 2017, 05:30:52 PM |
|
I'm having the same issue - can't get past 16 MH/s with a Red Dragon RX580 8Gb Hynix! Interestingly enough, I can only get 33 Mh/s with a Vega 56 which seems like 50% less than anyone else. Are there any other settings which may be bottle necking this ? This applies to ETC / ETH single and Dual Mining in Claymore, standard drivers, no BIOS mods. Edit: just found this discussion: https://www.reddit.com/r/EtherMining/comments/6hfivj/hd_7970_hash_rate/
|
|
|
|
RoyaLunique
Sr. Member
Offline
Activity: 383
Merit: 272
Legend is back.
|
|
December 02, 2017, 07:39:14 PM |
|
Dont hig mod you can burn it.
|
|
|
|
tsebal
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 09, 2017, 01:34:32 PM |
|
Hello, I have the same problem. After Nicehash was hacked (my 2x RX480 4gb OC+ with modded bios 1190 Mhz core, 2150 Mhz RAM Samsung was stable at ETH 26-27 Mh/s + Decred 790 Mh/s on each GPU with Nicehash program + Claymore Dual miner). I tried run Claymore manually and receive 22,5 Mh/s on ETH + Decred 700-760 Mh/s. Up + n Down - (-decri) in console - no effect on ETH hashrate (
|
|
|
|
|
|
surferdudemi
Jr. Member
Offline
Activity: 75
Merit: 1
|
|
January 02, 2018, 04:30:10 AM Last edit: January 02, 2018, 05:02:36 AM by surferdudemi |
|
I'm having the same issues with RX570 and RX480 boards. I just tried backing up to the suggested drivers (17.11.4), but the hashrate did not improve, and Afterburner wasn't able to measure GPU temp on either card or voltage on one. Possibly an incompatibility between latest Afterburner and the Nov 27 drivers. I keep reading that stock, out of the box, I should be getting >22 MH/s with these cards. Using Afterburner prior to this, I was able to tweak it from 17 MH/s to 20 MH/s on the RX580 card. No BIOS update or anything more. I'm running on Win 7 64-bit. Noted that Dev Mgr reports a completely different driver series number, but the installer reported the expected number when it completed. Now back to the latest driver (17.12.2, I think).
The RX480 has Samsung memory. The RX570 has Elpida memory.
When I only had one card (RX580) I wondered if running the display on one of the cards was taking up some of the processing power, but I've got both cards now, and the display is only running from one of them, so that can't be it. (And nobody has said that this affects the hashrate.)
I'm stumped. I should be able to get to at least >22 MH/s without doing any BIOS updates, right? I'd like to just solve the base issue for now.
Thanks
|
|
|
|
ikill4food2
Member
Offline
Activity: 126
Merit: 11
|
|
January 02, 2018, 02:25:38 PM |
|
I'm having the same issues with RX570 and RX480 boards. I just tried backing up to the suggested drivers (17.11.4), but the hashrate did not improve, and Afterburner wasn't able to measure GPU temp on either card or voltage on one. Possibly an incompatibility between latest Afterburner and the Nov 27 drivers. I keep reading that stock, out of the box, I should be getting >22 MH/s with these cards. Using Afterburner prior to this, I was able to tweak it from 17 MH/s to 20 MH/s on the RX580 card. No BIOS update or anything more. I'm running on Win 7 64-bit. Noted that Dev Mgr reports a completely different driver series number, but the installer reported the expected number when it completed. Now back to the latest driver (17.12.2, I think).
The RX480 has Samsung memory. The RX570 has Elpida memory.
When I only had one card (RX580) I wondered if running the display on one of the cards was taking up some of the processing power, but I've got both cards now, and the display is only running from one of them, so that can't be it. (And nobody has said that this affects the hashrate.)
I'm stumped. I should be able to get to at least >22 MH/s without doing any BIOS updates, right? I'd like to just solve the base issue for now.
Thanks
Gotta run Windows 10 - 64bit ...Windows 7 will not allow the speed&x lanes needed
|
|
|
|
|
tigersatti
Newbie
Offline
Activity: 1
Merit: 0
|
|
January 14, 2018, 06:51:03 PM |
|
Can you please share your modified bios here? I have installed fall creators update, lates amd mining drivers, copied the straps 1500 to 2000, it did bump speed a bit but currently 22 MH, no where near what everyone claiming to be 28-30 Mhs. Using power color 580 red dragon 4gb with hynix memory. Did overclocking with msi after burner as well but not much help.
|
|
|
|
surferdudemi
Jr. Member
Offline
Activity: 75
Merit: 1
|
|
January 23, 2018, 06:45:55 AM |
|
Switching to Win 10 partly fixed the issue. Switching to Compute instead of Graphics in the utility boosted the rate quite a bit. What helped even more after that was turning off Crossfire! The first time I tried it, the system crashed. Perhaps that was with Win 7 - don't recall. But this time it worked fine and I was able to control the cards separately and get to about 23 - 24 on each card.
Thanks for the advice.
|
|
|
|
alforro
Copper Member
Newbie
Offline
Activity: 124
Merit: 0
I buy/sell crypto worldwide
|
|
May 07, 2018, 11:20:39 PM |
|
anyone with this issue on simplemining? I have 4 rx 580 asus strix 8gb, two of them are mining eth at 27mhs but the other two are only at 22mhs, non of the cards have OC nor bios mod.
|
|
|
|
|