[ANN] Denarius [D] - First "Tribus" PoW/PoS Hybrid Masternodes, Ring Sigs

[bryant.coleman]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

[buzzkillb]

Anyone wanting to test on DNR testnet with masternodes, the POW rewards are committing in a few hours. Need to join discord to get some testnet funds too.

Working on a guide that is relatively easy enough to copy and paste commands to test with and prepare for mainnet masternodes. 
https://denariustalk.org/index.php?/topic/129-dnr-masternode-setup/

[d3athgu1s3]

Judging by the description, this is an attempt to create a new Dash and Monera, with a new interface, but no more

Nice random statement yo. Where did it come from?

[AngryWhiteWolf]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

[bryant.coleman]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I am afraid that I don't have one with me right now. It might be a good idea to ask this question in the Denariustalk forum (there is a thread titled: "Denarius(DNR) Wallet" in the Tutorials & Help section (denariustalk.org).

[FacelessCrypto]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I am afraid that I don't have one with me right now. It might be a good idea to ask this question in the Denariustalk forum (there is a thread titled: "Denarius(DNR) Wallet" in the Tutorials & Help section (denariustalk.org).

Actually I could not get this chain of responses.. looks like all are drunk from legendary to jr. Members.. or I only may be..🤣🤣

[buzzkillb]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I just posted a link 2 posts above you how to compile the testnet wallet in ubuntu. Probably very similar for mainnet.

[kingcarsen]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I am afraid that I don't have one with me right now. It might be a good idea to ask this question in the Denariustalk forum (there is a thread titled: "Denarius(DNR) Wallet" in the Tutorials & Help section (denariustalk.org).

Actually I could not get this chain of responses.. looks like all are drunk from legendary to jr. Members.. or I only may be..🤣🤣

Run the following commands in order on a fresh Ubuntu 14.04/16.04 Server, 17.10 works but may need some small changes

To compile/run the graphical Denarius wallet (QT) on Ubuntu:

Update Ubuntu

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev libqt4-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

Now build your makefiles

Code:

qmake "USE_UPNP=1" "USE_QRCODE=1" "USE_LEVELDB=1" denarius-qt.pro

(USE_LEVELDB Flag is only required on v1.0.7.0, it will no longer be required on future releases)

Now compile

Code:

make -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start Denarius after compiling, run

Code:

./Denarius

To run Denarius in headless daemon mode (denariusd), use this guide to compile on Ubuntu or VPSs:

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

CD into the /src folder

Code:

cd src

Now compile

Code:

make -f makefile.unix -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start denariusd after compiling, run

Code:

./denariusd

https://denariustalk.org/index.php?/topic/138-guide-building-denarius-qtdenariusd-on-ubuntu/&tab=comments#comment-2202

[ekze]

BSOD.PW supports Denarius!

Welcome to the world of lucky mining!
http://bsod.pw

Code:

ccminer -a tribus -o stratum+tcp://eu1.bsod.pw:2153 -u YOURWALLETADDRESS.rigname -p x -R 5

More than 15 000 lucky miners knows why it is worthy to mine with bsod.pw

Telegram BSOD News  https://t.me/bsodnews

[EN] BSOD Support https://t.me/BsodPool_EN

[RU] BSOD Support  https://t.me/bsodpool

Telegram bot (recommended miners and commands) - miners and configs http://t.me/bsodpw_bot

BSOD Discord https://discord.gg/zwYddjX

Twitter  https://twitter.com/BsodPool

Be wise. Be profitable. Happy mining!
Your bsod.pw team.

[rendravolt]

I always see Denarius growing from time to time, seeing with enthusiasm and doing hard work, is great.

[vella85]

From what I have seen from people posting on Twitter, the masternodes test is going well with not too many issues/bugs so hopefully it won't be too long now before we see masternodes implemented here. Still the price is very cheap and could be a good time to own enough DNR for a masternode as I'm sure once they are implemented and people start to see DNR listed on Masternode websites, the price will surely go up.

[tam cheng]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I am afraid that I don't have one with me right now. It might be a good idea to ask this question in the Denariustalk forum (there is a thread titled: "Denarius(DNR) Wallet" in the Tutorials & Help section (denariustalk.org).

Actually I could not get this chain of responses.. looks like all are drunk from legendary to jr. Members.. or I only may be..🤣🤣

Run the following commands in order on a fresh Ubuntu 14.04/16.04 Server, 17.10 works but may need some small changes

To compile/run the graphical Denarius wallet (QT) on Ubuntu:

Update Ubuntu

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev libqt4-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

Now build your makefiles

Code:

qmake "USE_UPNP=1" "USE_QRCODE=1" "USE_LEVELDB=1" denarius-qt.pro

(USE_LEVELDB Flag is only required on v1.0.7.0, it will no longer be required on future releases)

Now compile

Code:

make -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start Denarius after compiling, run

Code:

./Denarius

To run Denarius in headless daemon mode (denariusd), use this guide to compile on Ubuntu or VPSs:

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

CD into the /src folder

Code:

cd src

Now compile

Code:

make -f makefile.unix -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start denariusd after compiling, run

Code:

./denariusd

https://denariustalk.org/index.php?/topic/138-guide-building-denarius-qtdenariusd-on-ubuntu/&tab=comments#comment-2202

Hello kingcarsen, When will be the Master node release?

[mornabo]

Carlsen, any updates on getting listed on new exchanges? I see DNR sitting on sitty exchanges and the volume also is too low to speculate upon.

May be you want to say shitty exchanges..my request to all is those exchanges may be not high end.. but still they help DNR.. but that do not mean that we should not get DNR listed in  good exchanges.. so will you be please list preferred order of best exchanges. This will help DNR and Mr.Carsen😀to focus on next focus exchange..  

in the current exchange such as cryptopia DNR volume can reach 25 btc, I think it does not include a small volume, sometimes I get my order in a short time when the market is busy but sometimes DNR market is also quiet, adding to the exchange it's a good idea for the market and enthusiasts for DNR to be bigger, maybe I would recommend DNR can be listed in Bittrex, Polonix, Binance, it will lift the price of DNR higher,

The exchanges are aware of DNR and I guess they're just waiting to add it? It seems like there is more interest to add pump coins as they are the ones who seem to be able to raise huge listing fees to entice exchanges to put them up.. I heard the Binance fee was 25BTC, who can afford that?!

Might be able to use crowdfunding or donate from user? I think some big exchanges also ask for dowries for they coins can be listed in exchange, I think it's natural? or there are some big exchanges that just ask from request of its users to get in?
if I'm not mistaken, a few years ago poloniex used that way, where if there are many users who request for one coin. then that coin will be listed on poloniex?

[d3athgu1s3]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I am afraid that I don't have one with me right now. It might be a good idea to ask this question in the Denariustalk forum (there is a thread titled: "Denarius(DNR) Wallet" in the Tutorials & Help section (denariustalk.org).

Actually I could not get this chain of responses.. looks like all are drunk from legendary to jr. Members.. or I only may be..🤣🤣

Run the following commands in order on a fresh Ubuntu 14.04/16.04 Server, 17.10 works but may need some small changes

To compile/run the graphical Denarius wallet (QT) on Ubuntu:

Update Ubuntu

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev libqt4-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

Now build your makefiles

Code:

qmake "USE_UPNP=1" "USE_QRCODE=1" "USE_LEVELDB=1" denarius-qt.pro

(USE_LEVELDB Flag is only required on v1.0.7.0, it will no longer be required on future releases)

Now compile

Code:

make -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start Denarius after compiling, run

Code:

./Denarius

To run Denarius in headless daemon mode (denariusd), use this guide to compile on Ubuntu or VPSs:

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

CD into the /src folder

Code:

cd src

Now compile

Code:

make -f makefile.unix -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start denariusd after compiling, run

Code:

./denariusd

https://denariustalk.org/index.php?/topic/138-guide-building-denarius-qtdenariusd-on-ubuntu/&tab=comments#comment-2202

Hello kingcarsen, When will be the Master node release?

It's been repeated many times, there is no timeline here. It will release when it is ready, which is anytime soon this year. So buy up before it's too late.

[enkayz]

what is the staking rate for denarius?

I haven't tried staking yet, as my laptop is not a very high-end one. But it seems like there is a 6% APR on your current amount of coins. That means that if you got 1,000 coins and if you are staking 24-hours a day, 365-days a year, then you should get 60 coins from staking. That amounts to more than 0.1% per week. Someone please correct me if I am wrong.

Is there a guide about how to compile the wallet on Ubuntu? With the masternodes release happening soon it will be helpful. Can't remember how I did it last time but I struggled a little.
Thank you.

I am afraid that I don't have one with me right now. It might be a good idea to ask this question in the Denariustalk forum (there is a thread titled: "Denarius(DNR) Wallet" in the Tutorials & Help section (denariustalk.org).

Actually I could not get this chain of responses.. looks like all are drunk from legendary to jr. Members.. or I only may be..🤣🤣

Run the following commands in order on a fresh Ubuntu 14.04/16.04 Server, 17.10 works but may need some small changes

To compile/run the graphical Denarius wallet (QT) on Ubuntu:

Update Ubuntu

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev libqt4-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

Now build your makefiles

Code:

qmake "USE_UPNP=1" "USE_QRCODE=1" "USE_LEVELDB=1" denarius-qt.pro

(USE_LEVELDB Flag is only required on v1.0.7.0, it will no longer be required on future releases)

Now compile

Code:

make -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start Denarius after compiling, run

Code:

./Denarius

To run Denarius in headless daemon mode (denariusd), use this guide to compile on Ubuntu or VPSs:

Code:

sudo apt-get update

Install required deps

Code:

sudo apt-get install git build-essential libboost-all-dev libqrencode-dev libminiupnpc-dev libssl-dev libdb++-dev

Clone the repo

Code:

git clone https://github.com/carsenk/denarius

CD into the cloned repo

Code:

cd denarius

CD into the /src folder

Code:

cd src

Now compile

Code:

make -f makefile.unix -j8

(-j8 (8 is the number of cores of your processor to compile on, this speeds up the compilation process)

To run and start denariusd after compiling, run

Code:

./denariusd

https://denariustalk.org/index.php?/topic/138-guide-building-denarius-qtdenariusd-on-ubuntu/&tab=comments#comment-2202

Hello kingcarsen, When will be the Master node release?

It's been repeated many times, there is no timeline here. It will release when it is ready, which is anytime soon this year. So buy up before it's too late.

Just to note, the masternode (and pos reward fix) release will not introduce masternodes straight away.

Similar to other feature rollouts, there will be a new network protocol introduced in the release which will activate at a set block height. The exact height is not decided yet, but it will allow a couple of months for everyone to get the updated release installed before the new version of the protocol is used for blocks - at that point any blocks generated by older clients will not be accepted by newer clients - unless nobody updates and the majority of clients remain on older releases. However seeing as the new release will increase staking profits, enable masternodes, implement new anonymous transactions and the like, we expect everyone will want to update within the period that is set for the change to occur.

So in regards to 'masternodes could be here any day', it is not really the case, the release itself may be here any day however at that point, the 'date' for masternodes to start working will be in the source code for everyone to see. I expect the price to start rising sharply once this release is committed and the date is set in stone.

[kingcarsen]

https://twitter.com/carsenjk/status/965845339772039174

[steve0nz]

how many coins are needed for a node?

[kingcarsen]

how many coins are needed for a node?

5,000 DNR, Announcement to update will be coming soon! Date currently is set for March 14th 2018 0:00 GMT for hybrid masternodes to go live for the first time ever in crypto history on the mainnet. v2.0.0.0 will be released very soon after some last minute testing

Also don't take it the wrong way steve0nz, because it is a solid question, just modified your comment a little bit to make this a more informative tweet
https://twitter.com/carsenjk/status/965879574373347328

[enkayz]

Forgive me if this is a dumb question, but I like this project and would like to know one detail:

If the project is going to end PoW at 10M, then begin PoS.... how can supply be 10M MAX? 

PoW does not end at 10M, it ends at block 3M by which time there will be roughly 7M DNR in circulation, since it is a hybrid system and not every block will be PoW.

PoS does not begin at 10M either, it is already on the network - and will continue to generate coins until the 10M max supply is reached

[bryant.coleman]

how many coins are needed for a node?

5,000 DNR, Announcement to update will be coming soon! Date currently is set for March 14th 2018 0:00 GMT for hybrid masternodes to go live for the first time ever in crypto history on the mainnet. v2.0.0.0 will be released very soon after some last minute testing

Also don't take it the wrong way steve0nz, because it is a solid question, just modified your comment a little bit to make this a more informative tweet
https://twitter.com/carsenjk/status/965879574373347328

5,000 DNR is going to cost around $16,500 (as per the current exchange rates). I won't be able to do this, but all the best for everyone going for it. And hopefully with the masternodes, the exchange rate may go up by 100% to 200% in the short-term.