signatum (OP)
Newbie
Offline
Activity: 59
Merit: 0
|
|
July 22, 2017, 02:50:36 AM |
|
The windows wallet is not synchronized, what could be the problem?
Try adding nodes to your config file. addnode=122.129.64.13 addnode=104.199.11.56 addnode=35.189.14.132 addnode=54.175.225.242
|
|
|
|
e6ug
|
|
July 22, 2017, 03:30:34 AM |
|
I've already spoken to trex, we've already submitted a request, but after talking to Richie over there, it seems there's a nice stack of people waiting to be listed. I paid for cryptopia listing already, .97 BTC is what that cost me. We'll see what happens with Trex, but for now I'm happy with cryptopia, we'll go for Trex after a few weeks go by. I will definitely be willing to help out with the listing on Trex, and I have direct communication with Richie and Bill there. Their basic listing is 3 BTC, so a bit higher than cryptopia... but we'll figure it out. I'm still new to crypto stuff, hard to imagine having 0.97 BTC, much rather it being worth paying that to list someone else's coin. Either way, super nice of you to do, much appreciated. seems like a good dude to have in the community!
|
|
|
|
Sir Legend
|
|
July 22, 2017, 03:36:46 AM |
|
The windows wallet is not synchronized, what could be the problem?
Try adding nodes to your config file. addnode=122.129.64.13 addnode=104.199.11.56 addnode=35.189.14.132 addnode=54.175.225.242
I like new algortitm because I am programmer student Thank you sir, I also experienced the same thing and I will try it.
|
|
|
|
stalkerybr
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 22, 2017, 04:32:15 AM |
|
The windows wallet is not synchronized, what could be the problem?
socks5 proxy uncheck
|
|
|
|
Shankar94
Full Member
Offline
Activity: 140
Merit: 100
DeepOnion ♡
|
|
July 22, 2017, 04:36:12 AM |
|
One small Help . In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model . But i noticed in tread that 1060's are making 20mhs . So i downloaded and tried SIGT-Miner Im getting Error as follows. Cards are not OC ed Bat file : setx GPU_MAX_ALLOC_PERCENT 70 sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x
|
|
|
|
e6ug
|
|
July 22, 2017, 04:50:11 AM |
|
One small Help . In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model . But i noticed in tread that 1060's are making 20mhs . So i downloaded and tried SIGT-Miner Im getting Error as follows. Cards are not OC ed Bat file : setx GPU_MAX_ALLOC_PERCENT 70 sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x you need the private miner for faster speeds. sigt-miner is not good for nvidia. private miner makes about 16-17 mh/s for 1060
|
|
|
|
octavarium
|
|
July 22, 2017, 04:56:30 AM |
|
One small Help . In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model . But i noticed in tread that 1060's are making 20mhs . So i downloaded and tried SIGT-Miner Im getting Error as follows. Cards are not OC ed Bat file : setx GPU_MAX_ALLOC_PERCENT 70 sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x use ccminer
|
|
|
|
|
Nemo1985
Member
Offline
Activity: 107
Merit: 10
|
|
July 22, 2017, 06:37:43 AM |
|
One small Help . In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model . But i noticed in tread that 1060's are making 20mhs . So i downloaded and tried SIGT-Miner Im getting Error as follows. Cards are not OC ed Bat file : setx GPU_MAX_ALLOC_PERCENT 70 sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x use ccminer Is ccminer better than sgminer for a 760 too? Thank you in advance.
|
|
|
|
FlHash
Member
Offline
Activity: 62
Merit: 10
|
|
July 22, 2017, 06:47:15 AM |
|
One small Help . In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model . But i noticed in tread that 1060's are making 20mhs . So i downloaded and tried SIGT-Miner Im getting Error as follows. Cards are not OC ed Bat file : setx GPU_MAX_ALLOC_PERCENT 70 sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x use ccminer Is ccminer better than sgminer for a 760 too? Thank you in advance. It's better, ccminer is for Nvidia cards, sgminer is for AMD.
|
HUG Node Address: HLQ8XadYetzMNHXfGs92bbonY97t8bdv9x HUG Wallet Address: HUMLma7kqUcESrUtZVJHwms9cJuRmn45ad
|
|
|
12edz
Newbie
Offline
Activity: 58
Merit: 0
|
|
July 22, 2017, 07:12:41 AM |
|
My 1060 3G 12.5 MH/s with OC Power limit 80/Core+150/Mem+500 1080TI Aorus 36 MH/s with OC Power limit 100/Core+60/Mem+600
Is it normal or any recommend for more effective? https://www.uppic.org/image-2507_5972F823.jpg
|
|
|
|
varava1990
Newbie
Offline
Activity: 51
Merit: 0
|
|
July 22, 2017, 07:31:55 AM |
|
help me please I have 470 and 480 video cards I can not start the sgminer
bat file: setx GPU_MAX_ALLOC_PERCENT 70
sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1
The program writes: started sgminer 5.3.3 *using Jansson 2.10 started sgminer 5.3.3 *using Jansson 2.10 WARNING: GPU_USE_SYNC_OBJECTS is not specified!
|
|
|
|
FlHash
Member
Offline
Activity: 62
Merit: 10
|
|
July 22, 2017, 07:44:12 AM |
|
help me please I have 470 and 480 video cards I can not start the sgminer
bat file: setx GPU_MAX_ALLOC_PERCENT 70
sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1
The program writes: started sgminer 5.3.3 *using Jansson 2.10 started sgminer 5.3.3 *using Jansson 2.10 WARNING: GPU_USE_SYNC_OBJECTS is not specified!
Try this : sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 pause --gpu-platform 1 is needed when you are using an integrated VGA card too The -I 9 intensity is very low too, i think it would be the best if you leave it, and let the pool set it for you automatically. At least it works fine for me.
|
HUG Node Address: HLQ8XadYetzMNHXfGs92bbonY97t8bdv9x HUG Wallet Address: HUMLma7kqUcESrUtZVJHwms9cJuRmn45ad
|
|
|
Nemo1985
Member
Offline
Activity: 107
Merit: 10
|
|
July 22, 2017, 07:51:02 AM |
|
Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...
Thank you in advance.
|
|
|
|
varava1990
Newbie
Offline
Activity: 51
Merit: 0
|
|
July 22, 2017, 07:59:13 AM |
|
help me please I have 470 and 480 video cards I can not start the sgminer
bat file: setx GPU_MAX_ALLOC_PERCENT 70
sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1
The program writes: started sgminer 5.3.3 *using Jansson 2.10 started sgminer 5.3.3 *using Jansson 2.10 WARNING: GPU_USE_SYNC_OBJECTS is not specified!
Try this : sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 pause --gpu-platform 1 is needed when you are using an integrated VGA card too The -I 9 intensity is very low too, i think it would be the best if you leave it, and let the pool set it for you automatically. At least it works fine for me. Used your settings, writes: http://savepic.ru/15006511.jpg
|
|
|
|
borderline
|
|
July 22, 2017, 08:04:54 AM |
|
help me please I have 470 and 480 video cards I can not start the sgminer
bat file: setx GPU_MAX_ALLOC_PERCENT 70
sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1
The program writes: started sgminer 5.3.3 *using Jansson 2.10 started sgminer 5.3.3 *using Jansson 2.10 WARNING: GPU_USE_SYNC_OBJECTS is not specified!
intensity too low set 17 and delete --gpu platform
|
|
|
|
FlHash
Member
Offline
Activity: 62
Merit: 10
|
|
July 22, 2017, 08:13:52 AM |
|
help me please I have 470 and 480 video cards I can not start the sgminer
bat file: setx GPU_MAX_ALLOC_PERCENT 70
sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1
The program writes: started sgminer 5.3.3 *using Jansson 2.10 started sgminer 5.3.3 *using Jansson 2.10 WARNING: GPU_USE_SYNC_OBJECTS is not specified!
Try this : sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 pause --gpu-platform 1 is needed when you are using an integrated VGA card too The -I 9 intensity is very low too, i think it would be the best if you leave it, and let the pool set it for you automatically. At least it works fine for me. Used your settings, writes: I think it will be ok, as I see there are 4 GPUs, and the hashrate will speed up within a few minutes. If it does not, you have to increase the intensity manually.
|
HUG Node Address: HLQ8XadYetzMNHXfGs92bbonY97t8bdv9x HUG Wallet Address: HUMLma7kqUcESrUtZVJHwms9cJuRmn45ad
|
|
|
FlHash
Member
Offline
Activity: 62
Merit: 10
|
|
July 22, 2017, 08:23:52 AM |
|
Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...
Thank you in advance.
It's possible but the hash rate will be very slow it does not worth it. As I saw it on the main page, you can mine it with CPU, maybe it worth a try.
|
HUG Node Address: HLQ8XadYetzMNHXfGs92bbonY97t8bdv9x HUG Wallet Address: HUMLma7kqUcESrUtZVJHwms9cJuRmn45ad
|
|
|
Nemo1985
Member
Offline
Activity: 107
Merit: 10
|
|
July 22, 2017, 08:27:10 AM |
|
Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...
Thank you in advance.
It's possible but the hash rate will be very slow it does not worth it. As I saw it on the main page, you can mine it with CPU, maybe it worth a try. I'm already mining with my cpu it's aroung 100kh\s per core, I was curious to try the igp to squeeze everything from my pc
|
|
|
|
FlHash
Member
Offline
Activity: 62
Merit: 10
|
|
July 22, 2017, 08:37:03 AM |
|
Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...
Thank you in advance.
It's possible but the hash rate will be very slow it does not worth it. As I saw it on the main page, you can mine it with CPU, maybe it worth a try. I'm already mining with my cpu it's aroung 100kh\s per core, I was curious to try the igp to squeeze everything from my pc I see Try it, I became curious too
|
HUG Node Address: HLQ8XadYetzMNHXfGs92bbonY97t8bdv9x HUG Wallet Address: HUMLma7kqUcESrUtZVJHwms9cJuRmn45ad
|
|
|
|