[ANN] Signatum - New Algorithm - Fair Launch - No Premine

[signatum]

The windows wallet is not synchronized, what could be the problem?

Try adding nodes to your config file.

Code:

addnode=122.129.64.13
addnode=104.199.11.56
addnode=35.189.14.132
addnode=54.175.225.242

[e6ug]

3 days old and talking about trex or polo... take it easy, boys 

I've already spoken to trex, we've already submitted a request, but after talking to Richie over there, it seems there's a nice stack of people waiting to be listed.


I paid for cryptopia listing already, .97 BTC is what that cost me.


We'll see what happens with Trex, but for now I'm happy with cryptopia, we'll go for Trex after a few weeks go by.




I will definitely be willing to help out with the listing on Trex, and I have direct communication with Richie and Bill there. Their basic listing is 3 BTC, so a bit higher than cryptopia... but we'll figure it out.

I'm still new to crypto stuff, hard to imagine having 0.97 BTC, much rather it being worth paying that to list someone else's coin.  Either way, super nice of you to do, much appreciated.

seems like a good dude to have in the community!

[Sir Legend]

The windows wallet is not synchronized, what could be the problem?

Try adding nodes to your config file.

Code:

addnode=122.129.64.13
addnode=104.199.11.56
addnode=35.189.14.132
addnode=54.175.225.242

I like new algortitm because I am programmer student
Thank you sir, I also experienced the same thing and I will try it.

[stalkerybr]

The windows wallet is not synchronized, what could be the problem?

socks5 proxy uncheck

[Shankar94]

One small Help .

In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model .

But i noticed in tread that 1060's are making 20mhs .

So i downloaded and tried SIGT-Miner

Im getting Error as follows. Cards are not OC ed



Bat file :
setx GPU_MAX_ALLOC_PERCENT 70

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x

[e6ug]

One small Help .

In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model .

But i noticed in tread that 1060's are making 20mhs .

So i downloaded and tried SIGT-Miner

Im getting Error as follows. Cards are not OC ed



Bat file :
setx GPU_MAX_ALLOC_PERCENT 70

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x

you need the private miner for faster speeds. sigt-miner is not good for nvidia. private miner makes about 16-17 mh/s  for 1060

[octavarium]

One small Help .

In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model .

But i noticed in tread that 1060's are making 20mhs .

So i downloaded and tried SIGT-Miner

Im getting Error as follows. Cards are not OC ed



Bat file :
setx GPU_MAX_ALLOC_PERCENT 70

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x

use ccminer

[nhiatay]

ccminer-2.2-skunk CUDA miner with updated skunk algo and new improved tribus kernel is available now

you can download hashbag version here: https://hashbag.cc/ccminer-2.2-skunk.zip including the hashbag configs just change your address in the SIGT batch and away you go


original version (with ccminer urls) available at http://ccminer.org/preview/ccminer-2.2-skunk.7z

Thanks a lot for the miner, you save my life for my Nvdia card 

[Nemo1985]

One small Help .

In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model .

But i noticed in tread that 1060's are making 20mhs .

So i downloaded and tried SIGT-Miner

Im getting Error as follows. Cards are not OC ed



Bat file :
setx GPU_MAX_ALLOC_PERCENT 70

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x

use ccminer

Is ccminer better than sgminer for a 760 too?
Thank you in advance.

[FlHash]

One small Help .

In ccminer i m getting 60mhs in total for 5x1060 6GB AMP model .

But i noticed in tread that 1060's are making 20mhs .

So i downloaded and tried SIGT-Miner

Im getting Error as follows. Cards are not OC ed



Bat file :
setx GPU_MAX_ALLOC_PERCENT 70

sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u Shankar1994.Shankar -p x

use ccminer

Is ccminer better than sgminer for a 760 too?
Thank you in advance.

It's better, ccminer is for Nvidia cards, sgminer is for AMD.

[12edz]

My 1060 3G     12.5 MH/s with OC Power limit 80/Core+150/Mem+500
1080TI Aorus   36 MH/s   with OC Power limit 100/Core+60/Mem+600

Is it normal or any recommend for more effective?


https://www.uppic.org/image-2507_5972F823.jpg

[varava1990]

help me please
I have 470 and 480 video cards
I can not start the sgminer

bat file:
setx GPU_MAX_ALLOC_PERCENT 70

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1

The program writes:
started sgminer 5.3.3
*using Jansson 2.10
started sgminer 5.3.3
*using Jansson 2.10
WARNING: GPU_USE_SYNC_OBJECTS is not specified!

[FlHash]

help me please
I have 470 and 480 video cards
I can not start the sgminer

bat file:
setx GPU_MAX_ALLOC_PERCENT 70

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1

The program writes:
started sgminer 5.3.3
*using Jansson 2.10
started sgminer 5.3.3
*using Jansson 2.10
WARNING: GPU_USE_SYNC_OBJECTS is not specified!

Try this :

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1
pause

--gpu-platform 1 is needed when you are using an integrated VGA card too
The -I 9 intensity is very low too, i think it would be the best if you leave it, and let the pool set it for you automatically. At least it works fine for me.

[Nemo1985]

Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...

Thank you in advance.

[varava1990]

help me please
I have 470 and 480 video cards
I can not start the sgminer

bat file:
setx GPU_MAX_ALLOC_PERCENT 70

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1

The program writes:
started sgminer 5.3.3
*using Jansson 2.10
started sgminer 5.3.3
*using Jansson 2.10
WARNING: GPU_USE_SYNC_OBJECTS is not specified!

Try this :

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1
pause

--gpu-platform 1 is needed when you are using an integrated VGA card too
The -I 9 intensity is very low too, i think it would be the best if you leave it, and let the pool set it for you automatically. At least it works fine for me.

Used your settings, writes:
http://savepic.ru/15006511.jpg

[borderline]

help me please
I have 470 and 480 video cards
I can not start the sgminer

bat file:
setx GPU_MAX_ALLOC_PERCENT 70

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1

The program writes:
started sgminer 5.3.3
*using Jansson 2.10
started sgminer 5.3.3
*using Jansson 2.10
WARNING: GPU_USE_SYNC_OBJECTS is not specified!

intensity too low set 17
and delete --gpu platform

[FlHash]

help me please
I have 470 and 480 video cards
I can not start the sgminer

bat file:
setx GPU_MAX_ALLOC_PERCENT 70

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1 -I 9 --gpu-platform 1

The program writes:
started sgminer 5.3.3
*using Jansson 2.10
started sgminer 5.3.3
*using Jansson 2.10
WARNING: GPU_USE_SYNC_OBJECTS is not specified!

Try this :

sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u varava1990.varava -p 1
pause

--gpu-platform 1 is needed when you are using an integrated VGA card too
The -I 9 intensity is very low too, i think it would be the best if you leave it, and let the pool set it for you automatically. At least it works fine for me.

Used your settings, writes:

I think it will be ok, as I see there are 4 GPUs, and the hashrate will speed up within a few minutes. If it does not, you have to increase the intensity manually.

[FlHash]

Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...

Thank you in advance.

It's possible but the hash rate will be very slow it does not worth it. As I saw it on the main page, you can mine it with CPU, maybe it worth a try.

[Nemo1985]

Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...

Thank you in advance.

It's possible but the hash rate will be very slow it does not worth it. As I saw it on the main page, you can mine it with CPU, maybe it worth a try.

I'm already mining with my cpu it's aroung 100kh\s per core, I was curious to try the igp to squeeze everything from my pc

[FlHash]

Is it possible to use the integrated vga of my 6600k? Or I should ask if it is worth...

Thank you in advance.

It's possible but the hash rate will be very slow it does not worth it. As I saw it on the main page, you can mine it with CPU, maybe it worth a try.

I'm already mining with my cpu it's aroung 100kh\s per core, I was curious to try the igp to squeeze everything from my pc

I see Try it, I became curious too