▉ANN▉ MTNC ▉▉▉▉░ Masternodecoin ░▉▉▉ Multiple Privacy Center Platform

[ideaupdater]

I paid each user 50 viral (3.5$) points for retweet (1750 points). I think it attracts attention

thanks man , it's exchange ?

[sth2017]

I paid each user 50 viral (3.5$) points for retweet (1750 points). I think it attracts attention

thanks man , it's exchange ?

answered in PM.
I am the node holder. is interested in development

[perez70]

https://i.imgur.com/phhtCvQ.jpg

Burned, not bruned!

[ideaupdater]

https://i.imgur.com/phhtCvQ.jpg

Burned, not bruned!

hi ideaupdater ,i really shame of you. lol

[biznes35]

Tell me please bounty on a tweet paid or not yet? And if paid then where?

[rouhaud]

didn't find how to registerfor second airdrop can you help me.
thanks in advance

[Fjstrydom]

so where do you guys think MTNC will be in about 3 to 4 years? thats how long i intend to hodl MTNC

[Darkoth89]

didn't find how to registerfor second airdrop can you help me.
thanks in advance

It's not active yet, read the OP!  Starts on the 5th

Tell me please bounty on a tweet paid or not yet? And if paid then where?

Yup it's been paid, check the OP for the spreadsheet, and PM the dev if you have any issues.

[ideaupdater]

yeah,signature and twitter bounty have been sent.

[Buchi-88]

Anyone have a solution for the follow error by the compile on the Pi?

pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)

[ideaupdater]

Anyone have a solution for the follow error by the compile on the Pi?

pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)

did you try this/.

[ideaupdater]

Join our Slack Channel

[Darkoth89]

Wow, someone just dumped down to 800 sats on Cryptopia x.x

[Buchi-88]

Anyone have a solution for the follow error by the compile on the Pi?

pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)

did you try this/.

You mean this??

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ dir
autogen.sh  configure.ac  COPYING  libsecp256k1.pc.in  obj        sage  TODO
build-aux   contrib       include  Makefile.am         README.md  src
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

 

[ideaupdater]

Anyone have a solution for the follow error by the compile on the Pi?

pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)

did you try this/.

You mean this??

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ dir
autogen.sh  configure.ac  COPYING  libsecp256k1.pc.in  obj        sage  TODO
build-aux   contrib       include  Makefile.am         README.md  src
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

 

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

[sth2017]

Wow, someone just dumped down to 800 sats on Cryptopia x.x

the price will make 500. That people could buy.

[Scooter32]

Wow, someone just dumped down to 800 sats on Cryptopia x.x

the price will make 500. That people could buy.

500   Yeahr .....

I invested 0.9 btc at 0.00002500 on average

Thats Life  

[Buchi-88]

Anyone have a solution for the follow error by the compile on the Pi?

pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)

did you try this/.

You mean this??

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ dir
autogen.sh  configure.ac  COPYING  libsecp256k1.pc.in  obj        sage  TODO
build-aux   contrib       include  Makefile.am         README.md  src
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

 

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards

[Darkoth89]

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards

Try

Code:

sudo apt-get install autoconf autogen

[AbsoluteT]

Wow, someone just dumped down to 800 sats on Cryptopia x.x

the price will make 500. That people could buy.

500   Yeahr .....

I invested 0.9 btc at 0.00002500 on average

Thats Life  

If it gets cheaper you can buy a lil more and start running a master node holding is always the best solution to any loss