Bitcoin Forum
December 11, 2017, 07:48:33 PM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 [83] 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 ... 241 »
  Print  
Author Topic: ▉ANN▉ MTNC ▉▉▉▉░ Burn is coming ░▉▉▉ Dark Send & Masternode Economy  (Read 159001 times)
Buchi-88
Legendary
*
Offline Offline

Activity: 1456



View Profile
September 03, 2017, 05:03:58 PM
 #1641

Anyone have a solution for the follow error by the compile on the Pi?

Quote
pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)

                                 
           ░▓█████████████████▓░
          ▒▓██▓▓▓▓▓▓▓▓▓▓▒▓▒▒▒██▓▒░
      ░▒▓███▓                 ▒██▓▓▒░░    ░
▓▒███████▓▒        ░▒▒▒▒▒▒▒░    ░▓▓▓██▓▓▓▒▓
▒░██▒░░         ▒▓▓▓▓▒▒▒▒▓▓██▓▒     ░ ▒▓▓░▓
░▒▓█▒         ▒█▓▓▒▒▒▒▒▒▒▓▓▓████▓▓▒   ▒█▓▒▒
 ▒░██        ██▒▒▒▒▒▒▒▒▒▒▒▒▒░▒▒░██▒   ██▒▒
 ▓░▓█▒      ██▒▒▒▒▒▒░▒░░▒▒▒░░▒▓██▓   ▒██░▒
 ░▓░█▓     ▓█▓▒░▒▒▒▒▒▒▒░░░▒▒▓▓▓▓▓▒   ██░▓░
  ▓▒▒█▓  ▓▒█▓▒▒▓▓▒░▒░░░▒▒▒▒▒▒▒▒ █▒  ██▓░▓
   █░▒█▓ ▓███▓▒▒░░▒▒▒▒▒▒▒▒▒▒▒░ ▓█  ██▓ ▓
    █░▓█▓ ░██▓███▓▓▒▒▒▒▒▒▒░▒▒▓██  ██▓░▓
    ░█░▒██  ░ ░▓███████▓██████▒  ██▒░▓
      █▒░██▓      ░▒▒▓▓▓▓▒▒░   ▓██░▒▓
       ▓▓░▒██▒               ▒██▓░▓▓
        ░█▓░▓██▒           ▒██▓░▓█░
          ▒█▓░▓██▓       ▓██▓▒▓█▒
            ▒█▓▒▒███░ ▒███▒▒▓█▒
              ▒██▓▒▓███▓▒▒██▒
                ░▓██▒▒▒███░
                   ▒███▒














1513021713
Hero Member
*
Offline Offline

Posts: 1513021713

View Profile Personal Message (Offline)

Ignore
1513021713
Reply with quote  #2

1513021713
Report to moderator
1513021713
Hero Member
*
Offline Offline

Posts: 1513021713

View Profile Personal Message (Offline)

Ignore
1513021713
Reply with quote  #2

1513021713
Report to moderator
1513021713
Hero Member
*
Offline Offline

Posts: 1513021713

View Profile Personal Message (Offline)

Ignore
1513021713
Reply with quote  #2

1513021713
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1513021713
Hero Member
*
Offline Offline

Posts: 1513021713

View Profile Personal Message (Offline)

Ignore
1513021713
Reply with quote  #2

1513021713
Report to moderator
1513021713
Hero Member
*
Offline Offline

Posts: 1513021713

View Profile Personal Message (Offline)

Ignore
1513021713
Reply with quote  #2

1513021713
Report to moderator
1513021713
Hero Member
*
Offline Offline

Posts: 1513021713

View Profile Personal Message (Offline)

Ignore
1513021713
Reply with quote  #2

1513021713
Report to moderator
ideaupdater
Full Member
***
Offline Offline

Activity: 238


Masternodecoin Team


View Profile
September 03, 2017, 05:34:13 PM
 #1642

Anyone have a solution for the follow error by the compile on the Pi?

Quote
pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)
did you try this/.

ideaupdater
Full Member
***
Offline Offline

Activity: 238


Masternodecoin Team


View Profile
September 03, 2017, 06:03:17 PM
 #1643

Join our Slack Channel


Darkoth89
Hero Member
*****
Offline Offline

Activity: 490



View Profile
September 03, 2017, 06:05:20 PM
 #1644

Wow, someone just dumped down to 800 sats on Cryptopia x.x

                      ▄█████▄
                ▄████████▀
            ▄████████▀      ▄███▄
        ▄████████▀      ▄███████▄
    ▄████████▀      ▄███▀▀▀▀████▄
  ████████▀      ▄███▀            ▀████
███████▀      ▄███▀      ▄▄▄      ▀████
█████▀      ▄███▀      ▄█████      ▀███
████      ▄███▀      ▄█▀        ██      ███
███      ▄█  ▀      ▄████        ██      ███
███      ██        ████▀      ▄  █▀      ███
███      ██        ▄█▀      ▄███▀      ████
███▄      █████▀      ▄███▀      ▄█████
████▄      ▀▀▀      ▄███▀      ▄███████
  ████▄            ▄███▀      ▄████████
    ▀████▄▄▄▄███▀      ▄████████▀
        ▀███████▀      ▄████████▀
            ▀███▀      ▄████████▀
                        ▄████████▀
                        ▀█████▀

                                       ███████████             ███
                                       ███████████             ███
                                       ███             ▄▄▄▄    ███
                                       ███             █████▄  ███
███     ▄███  ███▄██████▄     ▄██████  ███                ███  ████████▄
███     ███▀  ████▀▀▀▀████   ███▀▀▀▀   █████████   ▄█████████  ███▀▀▀████
███     ███   ███      ███  ███        ███████▀   ████▀▀▀████  ███    ▀███
███     ███   ███      ███  ███        ███        ███     ███  ███     ███
████▄▄▄████   ███      ███  ███        ███        ███     ███  ███    ▄███
▀██████████   ███      ███   ███▄▄▄▄   ███        ████▄▄▄████  ███▄▄▄████
  ▀▀▀▀▀ ███   ███      ███    ▀██████  ███         ▀████████▀  ████████▀
       ▄███
      ████▀


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██
Buchi-88
Legendary
*
Offline Offline

Activity: 1456



View Profile
September 03, 2017, 06:18:15 PM
 #1645

Anyone have a solution for the follow error by the compile on the Pi?

Quote
pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)
did you try this/.

You mean this??

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ dir
autogen.sh  configure.ac  COPYING  libsecp256k1.pc.in  obj        sage  TODO
build-aux   contrib       include  Makefile.am         README.md  src
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

 Huh Huh

                                 
           ░▓█████████████████▓░
          ▒▓██▓▓▓▓▓▓▓▓▓▓▒▓▒▒▒██▓▒░
      ░▒▓███▓                 ▒██▓▓▒░░    ░
▓▒███████▓▒        ░▒▒▒▒▒▒▒░    ░▓▓▓██▓▓▓▒▓
▒░██▒░░         ▒▓▓▓▓▒▒▒▒▓▓██▓▒     ░ ▒▓▓░▓
░▒▓█▒         ▒█▓▓▒▒▒▒▒▒▒▓▓▓████▓▓▒   ▒█▓▒▒
 ▒░██        ██▒▒▒▒▒▒▒▒▒▒▒▒▒░▒▒░██▒   ██▒▒
 ▓░▓█▒      ██▒▒▒▒▒▒░▒░░▒▒▒░░▒▓██▓   ▒██░▒
 ░▓░█▓     ▓█▓▒░▒▒▒▒▒▒▒░░░▒▒▓▓▓▓▓▒   ██░▓░
  ▓▒▒█▓  ▓▒█▓▒▒▓▓▒░▒░░░▒▒▒▒▒▒▒▒ █▒  ██▓░▓
   █░▒█▓ ▓███▓▒▒░░▒▒▒▒▒▒▒▒▒▒▒░ ▓█  ██▓ ▓
    █░▓█▓ ░██▓███▓▓▒▒▒▒▒▒▒░▒▒▓██  ██▓░▓
    ░█░▒██  ░ ░▓███████▓██████▒  ██▒░▓
      █▒░██▓      ░▒▒▓▓▓▓▒▒░   ▓██░▒▓
       ▓▓░▒██▒               ▒██▓░▓▓
        ░█▓░▓██▒           ▒██▓░▓█░
          ▒█▓░▓██▓       ▓██▓▒▓█▒
            ▒█▓▒▒███░ ▒███▒▒▓█▒
              ▒██▓▒▓███▓▒▒██▒
                ░▓██▒▒▒███░
                   ▒███▒














ideaupdater
Full Member
***
Offline Offline

Activity: 238


Masternodecoin Team


View Profile
September 03, 2017, 06:22:17 PM
 #1646

Anyone have a solution for the follow error by the compile on the Pi?

Quote
pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)
did you try this/.

You mean this??

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ dir
autogen.sh  configure.ac  COPYING  libsecp256k1.pc.in  obj        sage  TODO
build-aux   contrib       include  Makefile.am         README.md  src
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

 Huh Huh

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

sth2017
Sr. Member
****
Offline Offline

Activity: 308



View Profile
September 03, 2017, 06:24:00 PM
 #1647

Wow, someone just dumped down to 800 sats on Cryptopia x.x

the price will make 500. That people could buy.

Scooter32
Member
**
Offline Offline

Activity: 94


View Profile
September 03, 2017, 06:33:41 PM
 #1648

Wow, someone just dumped down to 800 sats on Cryptopia x.x

the price will make 500. That people could buy.

500  Grin Yeahr .....

I invested 0.9 btc at 0.00002500 on average

Thats Life  Cry

Buchi-88
Legendary
*
Offline Offline

Activity: 1456



View Profile
September 03, 2017, 07:18:12 PM
 #1649

Anyone have a solution for the follow error by the compile on the Pi?

Quote
pi@raspberrypi:~ $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ sudo chmod +x src/leveldb/build_detect_platform
pi@raspberrypi:~/masternodecoin $ cd src/leveldb && make libleveldb.a libmemenv.a
make: 'libleveldb.a' is up to date.
make: 'libmemenv.a' is up to date.
pi@raspberrypi:~/masternodecoin/src/leveldb $ cd /home/pi/masternodecoin
pi@raspberrypi:~/masternodecoin $ qmake
Project MESSAGE: Building with DBUS (Freedesktop notifications) support
Project MESSAGE: Building with IPv6 support
Project MESSAGE: Building with UPNP support
Removed plural forms as the target language has less forms.
If this sounds wrong, possibly the target language is not set or recognized.
mpi@raspberrypi:~/masternodecoin $ make
cd /home/pi/masternodecoin/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/masternodecoin/src/leveldb'
make[1]: 'libleveldb.a' is up to date.
make[1]: 'libmemenv.a' is up to date.
make[1]: Leaving directory '/home/pi/masternodecoin/src/leveldb'
cd /home/pi/masternodecoin/src/secp256k1 && ./autogen.sh && ./configure --enable-module-recovery && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2"
/bin/sh: 1: ./autogen.sh: Permission denied
Makefile:846: recipe for target '/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o' failed
make: *** [/home/pi/masternodecoin/src/secp256k1/src/libsecp256k1_la-secp256k1.o] Error 126

regards

first maybe you should compile Secp256k1 first  and  give the aperation privileges to autogen.sh

You have for this a FAQ? I would when finish and run write a FAQ for Masternodecoin on the Pi ;-)
did you try this/.

You mean this??

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ dir
autogen.sh  configure.ac  COPYING  libsecp256k1.pc.in  obj        sage  TODO
build-aux   contrib       include  Makefile.am         README.md  src
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

 Huh Huh

-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards

                                 
           ░▓█████████████████▓░
          ▒▓██▓▓▓▓▓▓▓▓▓▓▒▓▒▒▒██▓▒░
      ░▒▓███▓                 ▒██▓▓▒░░    ░
▓▒███████▓▒        ░▒▒▒▒▒▒▒░    ░▓▓▓██▓▓▓▒▓
▒░██▒░░         ▒▓▓▓▓▒▒▒▒▓▓██▓▒     ░ ▒▓▓░▓
░▒▓█▒         ▒█▓▓▒▒▒▒▒▒▒▓▓▓████▓▓▒   ▒█▓▒▒
 ▒░██        ██▒▒▒▒▒▒▒▒▒▒▒▒▒░▒▒░██▒   ██▒▒
 ▓░▓█▒      ██▒▒▒▒▒▒░▒░░▒▒▒░░▒▓██▓   ▒██░▒
 ░▓░█▓     ▓█▓▒░▒▒▒▒▒▒▒░░░▒▒▓▓▓▓▓▒   ██░▓░
  ▓▒▒█▓  ▓▒█▓▒▒▓▓▒░▒░░░▒▒▒▒▒▒▒▒ █▒  ██▓░▓
   █░▒█▓ ▓███▓▒▒░░▒▒▒▒▒▒▒▒▒▒▒░ ▓█  ██▓ ▓
    █░▓█▓ ░██▓███▓▓▒▒▒▒▒▒▒░▒▒▓██  ██▓░▓
    ░█░▒██  ░ ░▓███████▓██████▒  ██▒░▓
      █▒░██▓      ░▒▒▓▓▓▓▒▒░   ▓██░▒▓
       ▓▓░▒██▒               ▒██▓░▓▓
        ░█▓░▓██▒           ▒██▓░▓█░
          ▒█▓░▓██▓       ▓██▓▒▓█▒
            ▒█▓▒▒███░ ▒███▒▒▓█▒
              ▒██▓▒▓███▓▒▒██▒
                ░▓██▒▒▒███░
                   ▒███▒














Darkoth89
Hero Member
*****
Offline Offline

Activity: 490



View Profile
September 03, 2017, 07:29:14 PM
 #1650


-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards


Try
Code:
sudo apt-get install autoconf autogen




                      ▄█████▄
                ▄████████▀
            ▄████████▀      ▄███▄
        ▄████████▀      ▄███████▄
    ▄████████▀      ▄███▀▀▀▀████▄
  ████████▀      ▄███▀            ▀████
███████▀      ▄███▀      ▄▄▄      ▀████
█████▀      ▄███▀      ▄█████      ▀███
████      ▄███▀      ▄█▀        ██      ███
███      ▄█  ▀      ▄████        ██      ███
███      ██        ████▀      ▄  █▀      ███
███      ██        ▄█▀      ▄███▀      ████
███▄      █████▀      ▄███▀      ▄█████
████▄      ▀▀▀      ▄███▀      ▄███████
  ████▄            ▄███▀      ▄████████
    ▀████▄▄▄▄███▀      ▄████████▀
        ▀███████▀      ▄████████▀
            ▀███▀      ▄████████▀
                        ▄████████▀
                        ▀█████▀

                                       ███████████             ███
                                       ███████████             ███
                                       ███             ▄▄▄▄    ███
                                       ███             █████▄  ███
███     ▄███  ███▄██████▄     ▄██████  ███                ███  ████████▄
███     ███▀  ████▀▀▀▀████   ███▀▀▀▀   █████████   ▄█████████  ███▀▀▀████
███     ███   ███      ███  ███        ███████▀   ████▀▀▀████  ███    ▀███
███     ███   ███      ███  ███        ███        ███     ███  ███     ███
████▄▄▄████   ███      ███  ███        ███        ███     ███  ███    ▄███
▀██████████   ███      ███   ███▄▄▄▄   ███        ████▄▄▄████  ███▄▄▄████
  ▀▀▀▀▀ ███   ███      ███    ▀██████  ███         ▀████████▀  ████████▀
       ▄███
      ████▀


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██
AbsoluteT
Sr. Member
****
Offline Offline

Activity: 378



View Profile WWW
September 03, 2017, 07:40:27 PM
 #1651

Wow, someone just dumped down to 800 sats on Cryptopia x.x

the price will make 500. That people could buy.

500  Grin Yeahr .....

I invested 0.9 btc at 0.00002500 on average

Thats Life  Cry

If it gets cheaper you can buy a lil more and start running a master node holding is always the best solution to any loss

BRILIANTcoin
Sr. Member
****
Offline Offline

Activity: 294



View Profile
September 03, 2017, 08:07:41 PM
 #1652

The question of configuring the node on one computer but with one hard drive. After reading the instructions, I realized that to create a second node without the 2nd hard can not? and it is necessary to do start of one more purse? And all this in one purse can not be done?


▄▄▄████████▄▄▄
▄▄███▀▀████████▀▀███▄▄
▄██▀▀   ██████████   ▀▀██▄
▄██▀     ████████████     ▀██▄
██▀      ██████████████      ▀██
██▀      ████████████████      ▀██
██▀      ██████████████████      ▀██
▄██      █████████  █████████      ██▄
██      █████████    █████████      ██
██     █████████      █████████     ██
██    █████████        █████████    ██
██   █████████          █████████   ██
▀██ ██████████████████████████████ ██▀
████████████████████████ ███████████
██████████████████████   █████████
████████████████████     ███████
▀██▄                      ▄██▀
▀██▄▄                ▄▄██▀
▀▀███▄▄▄      ▄▄▄███▀▀
▀▀▀████████▀▀▀
  .A P H E L I O N.  [    ] 
▄████████████████████████▄
████████████▀     ████████
███████████       ████████
███████████    ███████████
███████████    ███████████
████████          ████████
████████          ████████
███████████    ███████████
███████████    ███████████
███████████    ███████████
███████████    ███████████
███████████    ███████████
▀████████████████████████▀
 
▄████████████████████████▄
██████████████████████████
████▀  ▀██████████████████
████▄  ▄██████████████████
██████████████████████████
████    ██    █▀    ▀█████
████    ██     ▄▄     ████
████    ██    ████    ████
████    ██    ████    ████
████    ██    ████    ████
████    ██    ████    ████
██████████████████████████
▀████████████████████████▀
 
▄████████████████████████▄
██████████████████████████
███████████████▀▀▀▀███████
████ ▀███████▀      ▀▀▀███
████    ▀▀██▀        ▄████
████▄               ██████
█████▄             ███████
██████▄           ████████
███▀██▀▀        ▄█████████
████▄▄       ▄▄███████████
██████████████████████████
██████████████████████████
▀████████████████████████▀
 
▄████████████████████████▄
██████████████████████████
██████████████████▀▀   ███
██████████████▀▀  ▄█▀ ▄███
██████████▀▀    ▄█▀   ████
██████▀▀      ▄█▀    ▄████
██▀▀        ▄█▀      █████
████▄▄    ▄█▀       ▄█████
████████▄█▀         ██████
██████████   ▄     ▄██████
██████████ ▄████▄▄ ███████
██████████████████████████
▀████████████████████████▀
  ▶  Whitepaper
▶  Website
▶  Register
Darkoth89
Hero Member
*****
Offline Offline

Activity: 490



View Profile
September 03, 2017, 08:17:25 PM
 #1653

The question of configuring the node on one computer but with one hard drive. After reading the instructions, I realized that to create a second node without the 2nd hard can not? and it is necessary to do start of one more purse? And all this in one purse can not be done?

You can setup multiple nodes on one machine:

https://docs.google.com/document/d/1m0YQVE-9CP_pLNKyMwQNMSj1QYOTbR0AKi_zjF7P8Hg/edit

                      ▄█████▄
                ▄████████▀
            ▄████████▀      ▄███▄
        ▄████████▀      ▄███████▄
    ▄████████▀      ▄███▀▀▀▀████▄
  ████████▀      ▄███▀            ▀████
███████▀      ▄███▀      ▄▄▄      ▀████
█████▀      ▄███▀      ▄█████      ▀███
████      ▄███▀      ▄█▀        ██      ███
███      ▄█  ▀      ▄████        ██      ███
███      ██        ████▀      ▄  █▀      ███
███      ██        ▄█▀      ▄███▀      ████
███▄      █████▀      ▄███▀      ▄█████
████▄      ▀▀▀      ▄███▀      ▄███████
  ████▄            ▄███▀      ▄████████
    ▀████▄▄▄▄███▀      ▄████████▀
        ▀███████▀      ▄████████▀
            ▀███▀      ▄████████▀
                        ▄████████▀
                        ▀█████▀

                                       ███████████             ███
                                       ███████████             ███
                                       ███             ▄▄▄▄    ███
                                       ███             █████▄  ███
███     ▄███  ███▄██████▄     ▄██████  ███                ███  ████████▄
███     ███▀  ████▀▀▀▀████   ███▀▀▀▀   █████████   ▄█████████  ███▀▀▀████
███     ███   ███      ███  ███        ███████▀   ████▀▀▀████  ███    ▀███
███     ███   ███      ███  ███        ███        ███     ███  ███     ███
████▄▄▄████   ███      ███  ███        ███        ███     ███  ███    ▄███
▀██████████   ███      ███   ███▄▄▄▄   ███        ████▄▄▄████  ███▄▄▄████
  ▀▀▀▀▀ ███   ███      ███    ▀██████  ███         ▀████████▀  ████████▀
       ▄███
      ████▀


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██


    ██  █
    ██  █
    ██
█  ██  █
█  ██  █
█  ██  █
█  ██  █
█  ██  █
    ██
█  ██
█  ██
izumaki
Full Member
***
Offline Offline

Activity: 126


View Profile
September 03, 2017, 08:40:10 PM
 #1654

please i want to have an idea if the airdrop is still ongoing.

eneloop
Legendary
*
Online Online

Activity: 1087


Ladestand: 100%


View Profile
September 03, 2017, 08:44:00 PM
 #1655

The question of configuring the node on one computer but with one hard drive. After reading the instructions, I realized that to create a second node without the 2nd hard can not? and it is necessary to do start of one more purse? And all this in one purse can not be done?
There is no need for a second hard disk drive. C: and D: in the instructions is just for example for two different data paths. It will work with C:\wallet1 and C:\wallet2 as well.

@izumaki
Read OP please.

BitSend ◢◤Clients | Source
www.bitsend.info
█▄
█████▄
████████▄
███████████▄
██████████████
███████████▀
████████▀
█████▀
█▀












Segwit | Core 0.14 | Masternodes
XEVAN | DK3 | Electrum soon
Bitcore - BTX/BTC -Project












BSD -USDT | Bittrex | C.Gather | S.Exchange
Cryptopia | NovaExchange | Livecoin
Litebit.eu | Faucet | Bitsend Airdrop













████
 ████
  ████
   ████
    ████
     ████
      ████
       ████
        ████
       ████
      ████
     ████
    ████
   ████
  ████
 ████
████

████
 ████
  ████
   ████
    ████
     ████
      ████
       ████
        ████
       ████
      ████
     ████
    ████
   ████
  ████
 ████
████
snodo
Full Member
***
Offline Offline

Activity: 126


View Profile
September 03, 2017, 08:49:15 PM
 #1656

please i want to have an idea if the airdrop is still ongoing.

2nd round will start on 05. sept

megashira1
Legendary
*
Offline Offline

Activity: 1071



View Profile
September 03, 2017, 09:01:03 PM
 #1657

please i want to have an idea if the airdrop is still ongoing.

2nd round will start on 05. sept

And how does one register?

lisasteca
Sr. Member
****
Offline Offline

Activity: 322



View Profile
September 03, 2017, 09:02:17 PM
 #1658

why people are dumping so hard the coin on cryptopia! that is good in one way many people will join the masternode, great job guys hope to see nice development!

██
█║█
║║║
║║║
█║█
██
'BTC MULTI-WALLET SOON'
▬▬▬ Download WHITEPAPER ▬▬▬

                    ▄██▄
                  ▄██████▄
                ▄██████████
              ▄██████████▀   ▄▄
            ▄██████████▀   ▄████▄
          ▄██████████▀    ████████▄
         ██████████▀      ▀████████
         ▀███████▀   ▄███▄  ▀████▀   ▄█▄
    ▄███▄  ▀███▀   ▄███████▄  ▀▀   ▄█████▄
  ▄███████▄      ▄██████████     ▄█████████
  █████████    ▄██████████▀    ▄██████████▀
   ▀█████▀   ▄██████████▀    ▄██████████▀
     ▀▀▀   ▄██████████▀    ▄██████████▀
          ██████████▀    ▄██████████▀
          ▀███████▀      █████████▀
            ▀███▀   ▄██▄  ▀█████▀
                  ▄██████▄  ▀▀▀
                  █████████
                   ▀█████▀
                     ▀▀▀
e i d o o
██

███▀▀
▐▐▌
▐▌
▐▌
▐▐▌
███▄▄
▀▀███
▐▌▌
▐▌
▐▌
▐▌▌
▄▄███
snodo
Full Member
***
Offline Offline

Activity: 126


View Profile
September 03, 2017, 09:07:26 PM
 #1659

please i want to have an idea if the airdrop is still ongoing.

2nd round will start on 05. sept

And how does one register?

Will be announced in the OP.
You will have to look there regularly - should be worth it when you receive free airdrop, isn't it? Wink


why people are dumping so hard the coin on cryptopia! that is good in one way many people will join the masternode, great job guys hope to see nice development!

Yes, lol. I am really thinking about buying the 50k for running a masternode
Sadly I missed the first round airdrop and it seems like the 2nd won't give enough coins for running the masternode.

Buchi-88
Legendary
*
Offline Offline

Activity: 1456



View Profile
September 03, 2017, 09:20:45 PM
 #1660


-->Secp256k1
    ./autogen.sh
./configure --enable-module-recovery
    make
    make install

THX but i'm in the right folder:

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
./autogen.sh: 3: ./autogen.sh: autoreconf: not found
pi@raspberrypi:~/masternodecoin/src/secp256k1 $

regards
Quote
Try
Code:
sudo apt-get install autoconf autogen







THX so the next step, but the next error  Angry

Quote
pi@raspberrypi:~/masternodecoin/src/secp256k1 $ ./autogen.sh
Can't exec "libtoolize": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 345, <GEN3> line 5.
autoreconf: failed to run libtoolize: No such file or directory
autoreconf: libtoolize is needed because this package uses Libtool

                                 
           ░▓█████████████████▓░
          ▒▓██▓▓▓▓▓▓▓▓▓▓▒▓▒▒▒██▓▒░
      ░▒▓███▓                 ▒██▓▓▒░░    ░
▓▒███████▓▒        ░▒▒▒▒▒▒▒░    ░▓▓▓██▓▓▓▒▓
▒░██▒░░         ▒▓▓▓▓▒▒▒▒▓▓██▓▒     ░ ▒▓▓░▓
░▒▓█▒         ▒█▓▓▒▒▒▒▒▒▒▓▓▓████▓▓▒   ▒█▓▒▒
 ▒░██        ██▒▒▒▒▒▒▒▒▒▒▒▒▒░▒▒░██▒   ██▒▒
 ▓░▓█▒      ██▒▒▒▒▒▒░▒░░▒▒▒░░▒▓██▓   ▒██░▒
 ░▓░█▓     ▓█▓▒░▒▒▒▒▒▒▒░░░▒▒▓▓▓▓▓▒   ██░▓░
  ▓▒▒█▓  ▓▒█▓▒▒▓▓▒░▒░░░▒▒▒▒▒▒▒▒ █▒  ██▓░▓
   █░▒█▓ ▓███▓▒▒░░▒▒▒▒▒▒▒▒▒▒▒░ ▓█  ██▓ ▓
    █░▓█▓ ░██▓███▓▓▒▒▒▒▒▒▒░▒▒▓██  ██▓░▓
    ░█░▒██  ░ ░▓███████▓██████▒  ██▒░▓
      █▒░██▓      ░▒▒▓▓▓▓▒▒░   ▓██░▒▓
       ▓▓░▒██▒               ▒██▓░▓▓
        ░█▓░▓██▒           ▒██▓░▓█░
          ▒█▓░▓██▓       ▓██▓▒▓█▒
            ▒█▓▒▒███░ ▒███▒▒▓█▒
              ▒██▓▒▓███▓▒▒██▒
                ░▓██▒▒▒███░
                   ▒███▒














Pages: « 1 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 [83] 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 ... 241 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!