[ANN][ULC] ICO - ULACOIN(ULC) - POW&POS - 10% - COINEXCHANGE

[penetrak]

I received airdrop. Thx.

[leslie4u]

Does anyone know-

1) Where and how do we check how many coins have we earned from mining thru the mining interface?
2) I see that this is a HybridCoin? Meaning after x amount of mining blocks it will change to POS. If yes, at what block do we switch to POS. I see that the POS percentage is 10% per annum, is that correct? How do I stake coin in windows wallet? This wallet is different, can someone guide me please?
3) Also I sent coins from mining tool to my webwallet and it never reached my wallet. Transaction id is dd4457b0cf80eae7f4b0285ed79f0742268d95a7e3c1e7c35b58128a13178fbc . Not sure where's the coin though.

Thanks

[rinemX]

Does anyone know-

1) Where and how do we check how many coins have we earned from mining thru the mining interface?
2) I see that this is a HybridCoin? Meaning after x amount of mining blocks it will change to POS. If yes, at what block do we switch to POS. I see that the POS percentage is 10% per annum, is that correct? How do I stake coin in windows wallet? This wallet is different, can someone guide me please?
3) Also I sent coins from mining tool to my webwallet and it never reached my wallet. Transaction id is dd4457b0cf80eae7f4b0285ed79f0742268d95a7e3c1e7c35b58128a13178fbc . Not sure where's the coin though.

Thanks

You need to catch up with the block chain before you start mining/sending coins
After you start daemon, open command prompt
navigate to

Code:

cd /d "%appdata%/Multichain"

then

Code:

multichain-cli ULC getinfo

Copy & paste what you got

[epicfailman]

Does anyone know-

1) Where and how do we check how many coins have we earned from mining thru the mining interface?
2) I see that this is a HybridCoin? Meaning after x amount of mining blocks it will change to POS. If yes, at what block do we switch to POS. I see that the POS percentage is 10% per annum, is that correct? How do I stake coin in windows wallet? This wallet is different, can someone guide me please?
3) Also I sent coins from mining tool to my webwallet and it never reached my wallet. Transaction id is dd4457b0cf80eae7f4b0285ed79f0742268d95a7e3c1e7c35b58128a13178fbc . Not sure where's the coin though.

Thanks

No results for this Txid
Check plz that your miner synchronized.

[Burmik123]

Hello ulatech, I did not receive airdrop, but I sent you PM yesterday

[vitalyl]

Interesting project! 
pm'ed my address

[rinemX]

anyone have this problem? Where you start daemon, and begin mining only a couple of coins, then it stops mining until restart? What's happening?

[taki183]

ulatech, hi, where is my Ulacoins? i send PM to you yesterday

I sent you yesterday. Please check your balance again.
If not, maybe I missed. so sorry for this. I will send it again to you

sorry dev, but my wallet s empty

http://prntscr.com/g6ir6u

[ulatech]

ulatech, hi, where is my Ulacoins? i send PM to you yesterday

I sent you yesterday. Please check your balance again.
If not, maybe I missed. so sorry for this. I will send it again to you

sorry dev, but my wallet s empty

http://prntscr.com/g6ir6u

Ok. I'll send it again to you
Sorry for this mistake

[ulatech]

Interesting project! 
pm'ed my address

Thanks
Sent. Please check your wallet.
Have a nice day sir!

[ulatech]

ulatech, hi, where is my Ulacoins? i send PM to you yesterday

I sent you yesterday. Please check your balance again.
If not, maybe I missed. so sorry for this. I will send it again to you

sorry dev, but my wallet s empty

http://prntscr.com/g6ir6u

I Sent. Please check your wallet again

[benjy33]

ULC    Ulacoin    2017-07-31 10:44:09    Coin rejected    250 / 250

It seems that something did not like the coin in novaechange

Maybe unknown algo, or false positive in virustotal?

I do not know if he tells us something about the dev it was the one that paid to be listed he will have to give the appropriate explanations

[ulatech]

PM with my wallet address

I sent it. Please check your balance
Have an amazing day!

[ulatech]

ULC    Ulacoin    2017-07-31 10:44:09    Coin rejected    250 / 250

It seems that something did not like the coin in novaechange

Maybe unknown algo, or false positive in virustotal?

I do not know if he tells us something about the dev it was the one that paid to be listed he will have to give the appropriate explanations

Nova supports only BTC and LTC - ULC modern algorithms - Nova is not lever.

[benjy33]

ULC    Ulacoin    2017-07-31 10:44:09    Coin rejected    250 / 250

It seems that something did not like the coin in novaechange

Maybe unknown algo, or false positive in virustotal?

I do not know if he tells us something about the dev it was the one that paid to be listed he will have to give the appropriate explanations

Nova supports only BTC and LTC - ULC modern algorithms - Nova is not lever.

ok , and What algorithm is your currency can be mine alone? What plans do you have for the future

[rinemX]

Please someone make a detailed guide on how to mine this coin. My miner keeps stalling and it doesn't mine after I run it for 5minutes. any guy cpu or gpu is helpful to me. 

How do you expect your coin to succeed if you other mining guide makes me fail!!!
If no one can access this coin it will fail!!!

[ulatech]

Please someone make a detailed guide on how to mine this coin. My miner keeps stalling and it doesn't mine after I run it for 5minutes. any guy cpu or gpu is helpful to me. 

How do you expect your coin to succeed if you other mining guide makes me fail!!!
If no one can access this coin it will fail!!!

Here you are.

k, I'm lost, how do I mine? I tried to follow the instructions, but I didn't understand half of it, after pressing start-mine, what else? where is the command line? what do i do with the getmininfo? how do i know that i already mining?, UlaBlock doesn't open, what it is? please, can anyone help?

1. Miner-Start
2. Miner Getinfo
3. After (2) there is command line
4. in command line - multichain-cli ULC setruntimeparam miningturnover 1
5. in command line - multichain-cli ULC getmininginfo
6. check value of blocks with blockexplorer
7. Want to check balance? in command line - multichain-cli ULC getbalance
8. Want to send into web wallet? Miner - Send, then your web wallet addres, then value on coins you want to send
9. ...
10. PROFIT!

[leslie4u]

Does anyone know-

1) Where and how do we check how many coins have we earned from mining thru the mining interface?
2) I see that this is a HybridCoin? Meaning after x amount of mining blocks it will change to POS. If yes, at what block do we switch to POS. I see that the POS percentage is 10% per annum, is that correct? How do I stake coin in windows wallet? This wallet is different, can someone guide me please?
3) Also I sent coins from mining tool to my webwallet and it never reached my wallet. Transaction id is dd4457b0cf80eae7f4b0285ed79f0742268d95a7e3c1e7c35b58128a13178fbc . Not sure where's the coin though.

Thanks

You need to catch up with the block chain before you start mining/sending coins
After you start daemon, open command prompt
navigate to

Code:

cd /d "%appdata%/Multichain"

then

Code:

multichain-cli ULC getinfo

Copy & paste what you got

Alright I relaunched the demon and it says Node started, now I opened Miner-getinfo, it does seem like the block is syncing but then everything I need to open and close this window to get the block info. Is there no way that this screen would autorefresh and get me the updated block info? Also once the mining is enalbled using the command "multichain-cli ULC setruntimeparam miningturnover 1", will we just let the console running and after sometime can run the command to check the balance? Also how does POS work? I do not see anything on the desktop wallet that would tell me anything about staking/POS. Also how long the coins needs to sit in wallet before staking? Since this is a starting period, does this mean staking doesn't work at the moment?

[ulatech]

Does anyone know-

1) Where and how do we check how many coins have we earned from mining thru the mining interface?
2) I see that this is a HybridCoin? Meaning after x amount of mining blocks it will change to POS. If yes, at what block do we switch to POS. I see that the POS percentage is 10% per annum, is that correct? How do I stake coin in windows wallet? This wallet is different, can someone guide me please?
3) Also I sent coins from mining tool to my webwallet and it never reached my wallet. Transaction id is dd4457b0cf80eae7f4b0285ed79f0742268d95a7e3c1e7c35b58128a13178fbc . Not sure where's the coin though.

Thanks

You need to catch up with the block chain before you start mining/sending coins
After you start daemon, open command prompt
navigate to

Code:

cd /d "%appdata%/Multichain"

then

Code:

multichain-cli ULC getinfo

Copy & paste what you got

Alright I relaunched the demon and it says Node started, now I opened Miner-getinfo, it does seem like the block is syncing but then everything I need to open and close this window to get the block info. Is there no way that this screen would autorefresh and get me the updated block info? Also once the mining is enalbled using the command "multichain-cli ULC setruntimeparam miningturnover 1", will we just let the console running and after sometime can run the command to check the balance? Also how does POS work? I do not see anything on the desktop wallet that would tell me anything about staking/POS. Also how long the coins needs to sit in wallet before staking? Since this is a starting period, does this mean staking doesn't work at the moment?

You can try this one:
It refreshes every "5" seconds but you can change it yourself seconds=%YOUR_TIMER% without the "%".

Just replace it with the current code or save a new file and call it %YOUR_FILE_NAME%.bat. Must end with .bat

Code:

cd /d "%appdata%/Multichain
SET seconds=5
@echo off
:loop
cls
multichain-cli ULC getinfo
ping localhost -n %seconds%+1 > nul
goto :loop
pause

Here's one for getmininginfo:

Code:

cd /d "%appdata%/Multichain
SET seconds=5
@echo off
:loop
cls
multichain-cli ULC getmininginfo
ping localhost -n %seconds%+1 > nul
goto :loop
pause

[leslie4u]

Does anyone know-

1) Where and how do we check how many coins have we earned from mining thru the mining interface?
2) I see that this is a HybridCoin? Meaning after x amount of mining blocks it will change to POS. If yes, at what block do we switch to POS. I see that the POS percentage is 10% per annum, is that correct? How do I stake coin in windows wallet? This wallet is different, can someone guide me please?
3) Also I sent coins from mining tool to my webwallet and it never reached my wallet. Transaction id is dd4457b0cf80eae7f4b0285ed79f0742268d95a7e3c1e7c35b58128a13178fbc . Not sure where's the coin though.

Thanks

You need to catch up with the block chain before you start mining/sending coins
After you start daemon, open command prompt
navigate to

Code:

cd /d "%appdata%/Multichain"

then

Code:

multichain-cli ULC getinfo

Copy & paste what you got

Alright I relaunched the demon and it says Node started, now I opened Miner-getinfo, it does seem like the block is syncing but then everything I need to open and close this window to get the block info. Is there no way that this screen would autorefresh and get me the updated block info? Also once the mining is enalbled using the command "multichain-cli ULC setruntimeparam miningturnover 1", will we just let the console running and after sometime can run the command to check the balance? Also how does POS work? I do not see anything on the desktop wallet that would tell me anything about staking/POS. Also how long the coins needs to sit in wallet before staking? Since this is a starting period, does this mean staking doesn't work at the moment?

You can try this one:
It refreshes every "5" seconds but you can change it yourself seconds=%YOUR_TIMER% without the "%".

Just replace it with the current code or save a new file and call it %YOUR_FILE_NAME%.bat. Must end with .bat

Code:

cd /d "%appdata%/Multichain
SET seconds=5
@echo off
:loop
cls
multichain-cli ULC getinfo
ping localhost -n %seconds%+1 > nul
goto :loop
pause

Here's one for getmininginfo:

Code:

cd /d "%appdata%/Multichain
SET seconds=5
@echo off
:loop
cls
multichain-cli ULC getmininginfo
ping localhost -n %seconds%+1 > nul
goto :loop
pause

Thanks will give that a try, how about the POS question that I asked?