[ANN] B2B Coin ( B2B ) - POW CryptoNight - Low Supply - No Premine - Exchange

[fonship]

Hi All,

With the help of a community member, we will start some marketing to make the coin visible around the world.
The more visibility we have before going to exchange the bigger the coin will be. All promotion is welcome and the more the coin is visible the higher the rate when entering exchange.

Marketing steps:

• We are starting donation round for 100 airdrops of 100 coins. Donations can be made to the address below
• We will tweak the wallet so all forknote coins can use the wallet.
• Logo is almost ready to distribute so the coin gets more spectators

Address: 68cQogr4MdxLDLPh9QdGPUYp1CNUX2xDGW5nvpQ4v2a86ymm9jdokwFQAaU5CvAdDTY4QC45CKnwBTA ck7Spja6tKsPYFdz

PS: The reason we are starting this fund is because we did no pre-mining on the coin. We wanted to give everybody the same changes ...

Kr,
Olivier @ http://b2bcoin.ml

Well great initiatives and seems like these plans will spread words every well. Great to see everyone donating, it proves that we are a community above greed. this will help in long term when all of us early miners give stable growth and strength to this coin. Good job everyone.

[1714682275]

1714682275

[1714682275]

1714682275

[1714682275]

1714682275

[fonship]

Hi All,

With the help of a community member, we will start some marketing to make the coin visible around the world.
The more visibility we have before going to exchange the bigger the coin will be. All promotion is welcome and the more the coin is visible the higher the rate when entering exchange.

Marketing steps:

• We are starting donation round for 100 airdrops of 100 coins. Donations can be made to the address below
• We will tweak the wallet so all forknote coins can use the wallet.
• Logo is almost ready to distribute so the coin gets more spectators

Address: 68cQogr4MdxLDLPh9QdGPUYp1CNUX2xDGW5nvpQ4v2a86ymm9jdokwFQAaU5CvAdDTY4QC45CKnwBTA ck7Spja6tKsPYFdz

PS: The reason we are starting this fund is because we did no pre-mining on the coin. We wanted to give everybody the same changes ...

Kr,
Olivier @ http://b2bcoin.ml

Well great initiatives and seems like these plans will spread words every well. Great to see everyone donating, it proves that we are a community above greed. this will help in long term when all of us early miners give stable growth and strength to this coin. Good job everyone.

Donated 3000 so that more people can get b2bcoin

[growarijo]

Hi All,

New wallets ready for download : http://b2bcoin.ml/#downloads

Kr,
Olivier @ b2bcoin

I am getting an error.

We tried to start the wallet rpc server on port 9090, it could not be started.

Hi internetfloozy,

Be sure the daemon and wallet daemon as well as simplewallet are closed and nothing is running on those ports neither.
If then still you get issues, you should send me the log files so I can check in more detail.

Was the wallet created in user home b2bcoin directory ?

Kr,
Olivier @ b2bcoin.ml

[internetfloozy]

Hi All,

New wallets ready for download : http://b2bcoin.ml/#downloads

Kr,
Olivier @ b2bcoin

I am getting an error.

We tried to start the wallet rpc server on port 9090, it could not be started.

Hi internetfloozy,

Be sure the daemon and wallet daemon as well as simplewallet are closed and nothing is running on those ports neither.
If then still you get issues, you should send me the log files so I can check in more detail.

Was the wallet created in user home b2bcoin directory ?

Kr,
Olivier @ b2bcoin.ml

Did a reboot and a fresh start and still not loading. According to b2bcoin-wallet.log it is filled with:
Execute method : 'getblockcount' : with execute params : { "jsonrpc":"2.0", "id":"test", "method":"getblockcount","params": {}}
Execute method : 'getblockcount' : response code : 200
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
Still Loading the wallet daemon ...

[fey2indi]

My wallet has been synchronized 100% but my balance is 0. 

[growarijo]

My wallet has been synchronized 100% but my balance is 0. 

Hi fey2indi,

Restart needed after 100% sync (is a known bug)

Kr,
Olivier @ b2bcoin.ml

[growarijo]

Hi All,

New wallets ready for download : http://b2bcoin.ml/#downloads

Kr,
Olivier @ b2bcoin

I am getting an error.

We tried to start the wallet rpc server on port 9090, it could not be started.

Hi internetfloozy,

Be sure the daemon and wallet daemon as well as simplewallet are closed and nothing is running on those ports neither.
If then still you get issues, you should send me the log files so I can check in more detail.

Was the wallet created in user home b2bcoin directory ?

Kr,
Olivier @ b2bcoin.ml

Did a reboot and a fresh start and still not loading. According to b2bcoin-wallet.log it is filled with:
Execute method : 'getblockcount' : with execute params : { "jsonrpc":"2.0", "id":"test", "method":"getblockcount","params": {}}
Execute method : 'getblockcount' : response code : 200
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
Still Loading the wallet daemon ...

Hi internetfloozy,

Maybe you can find more info in the walletd.log (that is the daemon on port 9090)

PS: Did you import or create a new wallet ? and if you imported it, did you import the correct file ? Itmust be the *.wallet file if you imported from simplewallet. Older gui wallets can be imported las well.


Kr,
Olivier @ b2bcoin.ml

[internetfloozy]

Hi All,

New wallets ready for download : http://b2bcoin.ml/#downloads

Kr,
Olivier @ b2bcoin

I am getting an error.

We tried to start the wallet rpc server on port 9090, it could not be started.

Hi internetfloozy,

Be sure the daemon and wallet daemon as well as simplewallet are closed and nothing is running on those ports neither.
If then still you get issues, you should send me the log files so I can check in more detail.

Was the wallet created in user home b2bcoin directory ?

Kr,
Olivier @ b2bcoin.ml

Did a reboot and a fresh start and still not loading. According to b2bcoin-wallet.log it is filled with:
Execute method : 'getblockcount' : with execute params : { "jsonrpc":"2.0", "id":"test", "method":"getblockcount","params": {}}
Execute method : 'getblockcount' : response code : 200
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
Still Loading the wallet daemon ...

Hi internetfloozy,

Maybe you can find more info in the walletd.log (that is the daemon on port 9090)

PS: Did you import or create a new wallet ? and if you imported it, did you import the correct file ? Itmust be the *.wallet file if you imported from simplewallet. Older gui wallets can be imported las well.


Kr,
Olivier @ b2bcoin.ml

I imported my Internetfloozy.wallet that has been working in the CLI

only two log files are b2bcoind.log and b2bcoin-wallet.log

[slb]

Hi All,

With the help of a community member, we will start some marketing to make the coin visible around the world.
The more visibility we have before going to exchange the bigger the coin will be. All promotion is welcome and the more the coin is visible the higher the rate when entering exchange.

Marketing steps:

• We are starting donation round for 100 airdrops of 100 coins. Donations can be made to the address below
• We will tweak the wallet so all forknote coins can use the wallet.
• Logo is almost ready to distribute so the coin gets more spectators

Address: 68cQogr4MdxLDLPh9QdGPUYp1CNUX2xDGW5nvpQ4v2a86ymm9jdokwFQAaU5CvAdDTY4QC45CKnwBTA ck7Spja6tKsPYFdz

PS: The reason we are starting this fund is because we did no pre-mining on the coin. We wanted to give everybody the same changes ...

Kr,
Olivier @ http://b2bcoin.ml

Hi,
We have 50000 DSH bounty for a forknote gui.

[fonship]

Hi All,

With the help of a community member, we will start some marketing to make the coin visible around the world.
The more visibility we have before going to exchange the bigger the coin will be. All promotion is welcome and the more the coin is visible the higher the rate when entering exchange.

Marketing steps:

• We are starting donation round for 100 airdrops of 100 coins. Donations can be made to the address below
• We will tweak the wallet so all forknote coins can use the wallet.
• Logo is almost ready to distribute so the coin gets more spectators

Address: 68cQogr4MdxLDLPh9QdGPUYp1CNUX2xDGW5nvpQ4v2a86ymm9jdokwFQAaU5CvAdDTY4QC45CKnwBTA ck7Spja6tKsPYFdz

PS: The reason we are starting this fund is because we did no pre-mining on the coin. We wanted to give everybody the same changes ...

Kr,
Olivier @ http://b2bcoin.ml

Hi,
We have 50000 DSH bounty for a forknote gui.

That's great, Dev you have support from forknote dev to do GUI, with a bounty thats great!!

[elGuilleAR]

Hello. Where is the repo for sources?
In the given repo there is only a web wallet.
Or even so, you can share the .conf for forknote?

thanks.-

[dx_twisted]

Is the Windows wallet link broken? Or is it just me? Please check guys, I'm interested in this coin. Thanks!

[Vorona34]

Hello. Wallet starts and gives an error with the port 9090.

http://joxi.ru/4AkZe4BIy85Y32

[growarijo]

Hello. Where is the repo for sources?
In the given repo there is only a web wallet.
Or even so, you can share the .conf for forknote?

thanks.-

Hi elGuilleAR,

The GUI wallet sources can be found on
https://github.com/oliviersinnaeve/b2bcoin-wallet

Kr,
Olivier

[growarijo]

Is the Windows wallet link broken? Or is it just me? Please check guys, I'm interested in this coin. Thanks!

Hoi dx_twisted,

Thanks for bringin it to my attention, did not notice the main thread links were not updated.

Windows wallet 64 bit : http://b2bcoin.ml/wallets/b2bcoin-wallet-windows-64.zip
Windows wallet 32 bit : http://b2bcoin.ml/wallets/b2bcoin-wallet-windows-32.zip

Kr,
Olivier Sinnaeve

[growarijo]

Hello. Wallet starts and gives an error with the port 9090.

http://joxi.ru/4AkZe4BIy85Y32

Hi Vorona34,

Can you try adding the line 
bind-address=127.0.0.1
to your coin-wallet.conf
in c:\Users\ÿour_user%\b2bcoin\configs

Kr,
Olivier

[growarijo]

Hi All,

With the help of a community member, we will start some marketing to make the coin visible around the world.
The more visibility we have before going to exchange the bigger the coin will be. All promotion is welcome and the more the coin is visible the higher the rate when entering exchange.

Marketing steps:

• We are starting donation round for 100 airdrops of 100 coins. Donations can be made to the address below
• We will tweak the wallet so all forknote coins can use the wallet.
• Logo is almost ready to distribute so the coin gets more spectators

Address: 68cQogr4MdxLDLPh9QdGPUYp1CNUX2xDGW5nvpQ4v2a86ymm9jdokwFQAaU5CvAdDTY4QC45CKnwBTA ck7Spja6tKsPYFdz

PS: The reason we are starting this fund is because we did no pre-mining on the coin. We wanted to give everybody the same changes ...

Kr,
Olivier @ http://b2bcoin.ml

Hi,
We have 50000 DSH bounty for a forknote gui.

Hi slb,

We are creating a Java GUI Wallet for the b2bcoin. But we have tweaked it already 100%, so it can be used for every forknote coin. Only configs need to change or do you want the wallet coin to be selectable ?

PS: We are not doing this for the bounty, but it would be more then welcome ...

Kr,
Olivier @ b2bcoin.ml

[Vorona34]

Hi Vorona34,

Can you try adding the line  
bind-address=127.0.0.1
to your coin-wallet.conf
in c:\Users\ÿour_user%\b2bcoin\configs

Kr,
Olivier

I did it. But error not disappeared

[growarijo]

Hi Vorona34,

Can you try adding the line  
bind-address=127.0.0.1
to your coin-wallet.conf
in c:\Users\ÿour_user%\b2bcoin\configs

Kr,
Olivier

I did it. But error not disappeared

Hi Vorona34,

If you join here you could get faster updates. We are aware of the windows issue, and a working version is there (can provide it on telegram) but it spawns an extra command prompt to be able to work. So we try to get rid off that.

https://t.me/joinchat/Fxlb2Qw8ivAta7iYgM0Wiw

Kr,
Olivier @ b2bcoin

[growarijo]

Hi All,

New wallets ready for download : http://b2bcoin.ml/#downloads

Kr,
Olivier @ b2bcoin

I am getting an error.

We tried to start the wallet rpc server on port 9090, it could not be started.

Hi internetfloozy,

Be sure the daemon and wallet daemon as well as simplewallet are closed and nothing is running on those ports neither.
If then still you get issues, you should send me the log files so I can check in more detail.

Was the wallet created in user home b2bcoin directory ?

Kr,
Olivier @ b2bcoin.ml

Did a reboot and a fresh start and still not loading. According to b2bcoin-wallet.log it is filled with:
Execute method : 'getblockcount' : with execute params : { "jsonrpc":"2.0", "id":"test", "method":"getblockcount","params": {}}
Execute method : 'getblockcount' : response code : 200
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
JSon Rcp Executor failed : Connection refused: connect
Still Loading the wallet daemon ...

Hi internetfloozy,

Maybe you can find more info in the walletd.log (that is the daemon on port 9090)

PS: Did you import or create a new wallet ? and if you imported it, did you import the correct file ? Itmust be the *.wallet file if you imported from simplewallet. Older gui wallets can be imported las well.


Kr,
Olivier @ b2bcoin.ml

I imported my Internetfloozy.wallet that has been working in the CLI

only two log files are b2bcoind.log and b2bcoin-wallet.log

Hi Internetfloozy,

You can download a new version from the website.
It should solve the 9090 port issue. IT was due to 32-64 bit on windows. We have chosen not to support 32 anymore, so now it should work. It will open a console, the wallet itself, don't pay to much attention to what you see there, all should be normal.

Kr,
Olivier @ b2boin.ml