ASUS B250 Mining Expert MB - 19 Cards!

[Bob-Bit]

So the maximum for AMD cards is 12? Can 12 be used + the integrated video also? That would be cool, then I'd just have to worry about hunting for the elusive p100-106's.

[remauto1187ma]

So the maximum for AMD cards is 12? Can 12 be used + the integrated video also? That would be cool, then I'd just have to worry about hunting for the elusive p100-106's.

The P106's arent elusive. They are always on ebay just ridiculously priced just like all P series cards.

[Bigdrago]

So the maximum for AMD cards is 12? Can 12 be used + the integrated video also? That would be cool, then I'd just have to worry about hunting for the elusive p100-106's.

13 gpu + 6 mining gpu

[ojcrisanto]

So the maximum for AMD cards is 12? Can 12 be used + the integrated video also? That would be cool, then I'd just have to worry about hunting for the elusive p100-106's.

13 gpu + 6 mining gpu

13 amd or nvidia? I hope this mobo can fully utilize 19 amd cards or nvidia because I have a lot of amd cards. Maybe is it a windows issue? I don't know. Please help

[Bob-Bit]

So the maximum for AMD cards is 12? Can 12 be used + the integrated video also? That would be cool, then I'd just have to worry about hunting for the elusive p100-106's.

The P106's arent elusive. They are always on ebay just ridiculously priced just like all P series cards.

I know, I'm just cheap, and they're rare enough that deals on them aren't too common, (especially if your somewhat ocd like me and would prefer not to mix brands) and also there are no warranties. Won't have to worry about it for a minute so maybe they'll come down a little more, and there could be more available then also. Kills me to pay more for one of these then a Rx480, but eh.

[keksik]

hello i have one rig with this mobo and so far so good.
i3 cpu
2x4gb ram ddr4
9x amd rx 580/70 4gb
1x 1650W psu

all working like a charm, getting 268mh/s, some card has better some not

[ojcrisanto]

Sometimes this mobo doesn't boot up properly when you turn off for how many days. You need to plug in again in iGPU

[Negativ_mi]

how do you work different graphics cards on this Board?
I have 6*1070, 3*1080, 3*1080ti only work with 3 miners (bat.files)

[Boriss]

Could someone using this board check for temperate readings, I have some high temps on few spots.



 

[Bigdrago]

Could someone using this board check for temperate readings, I have some high temps on few spots.

https://i.imgur.com/FvKNbIX.jpg

 

Tried hwmonitor?

[ThePunisher49X]

Have this board but haven't tested with past 13 cards yet.
Will be getting my hands on a p106-100 very soon so will let everybody know how it goes with amd cards along with these mining cards w/ nvidia chipset.

[Boriss]

Tried hwmonitor?

It seems that that high temps are results of missing sensors, all missing sensors shows as 118C on this board.
Same is on other people  Asus B250 ME boards.

[wtfonly16]

Have this board but haven't tested with past 13 cards yet.
Will be getting my hands on a p106-100 very soon so will let everybody know how it goes with amd cards along with these mining cards w/ nvidia chipset.

the board came out a year ago...

[Metroid]

The last amd gpu 13th on this board always stays with overvoltage 1.00v no matter what i do, any workaround it?

[remauto1187ma]

The last amd gpu 13th on this board always stays with overvoltage 1.00v no matter what i do, any workaround it?

Are you running ALL amd on the board or a mix?

[Metroid]

The last amd gpu 13th on this board always stays with overvoltage 1.00v no matter what i do, any workaround it?

Are you running ALL amd on the board or a mix?

Not me, friend of mine, I'm not a miner, however i set computers for him time to time, i did an amd rig for him on december 2017, he had the cards, i just changed to this motherboard, i could not get the 13th gpu to work with what i set in bios which is 850v, yes all amd cards, the 13gpu will only set 1.000v and the difference in watts is huge from the 2, 1.000v is 30 watts more.

[Bigdrago]

The last amd gpu 13th on this board always stays with overvoltage 1.00v no matter what i do, any workaround it?

What do u do to try to lower?

[Metroid]

The last amd gpu 13th on this board always stays with overvoltage 1.00v no matter what i do, any workaround it?

What do u do to try to lower?

What can i try? claymore and phoenix miners dont undervolt the 13th card, default voltage on the 13th card bios is 0.850v, nothing works, if i remove the 13th card then everything is okay, so it might be amd drivers or this motherboard's bios. Any solution?

[nitrobg]

The last amd gpu 13th on this board always stays with overvoltage 1.00v no matter what i do, any workaround it?

What do u do to try to lower?

What can i try? claymore and phoenix miners dont undervolt the 13th card, default voltage on the 13th card bios is 0.850v, nothing works, if i remove the 13th card then everything is okay, so it might be amd drivers or this motherboard's bios. Any solution?

Driver limitation. Try Linux or do a hard bios voltage mod.

[Metroid]

hard bios voltage mod.

That is a physical hardware mod right? In my book, that is a dangerous thing to do hehe but if done correctly is very safe.