[ANN] LINDA-PoW/PoS-99% APR- MASTERNODE-MULTI-WALLET ( NEW THREAD)

[visale]

DON'T GO TO linda.com
I don't know why , but there is a virus donwloading automaticaly when you click on the site.

WHAT THE HELL IS GOING ON?
DID SOME HACKER HACKED THE SITE AND PUT A MALWARE IN?
 

Why do you want to go to Linda.com? The official website is Lindacoin.com

-support team

[micromaxim]

keep a few coins when the new exchanges?

[GhostMinerBox]

Please explain something to me. I send 1840000 coins to my windows wallet. 24 hours later it matured and it reported staking with 8 hours to go to the reward.  After about 10 hours reward of 1816.94242496 came in. All as expected so far but then there is something I don't understand. ALL my coins moved from Spendable to Stake for a while and then original amount + reward moved to Spendable, but the staking icon now reports - Not staking because you don't have mature coins. Why is that? How my mature coins became immature again? Did I setup something wrong? Makes no sense to me. Anybody?

[visale]

Please explain something to me. I send 1840000 coins to my windows wallet. 24 hours later it matured and it reported staking with 8 hours to go to the reward.  After about 10 hours reward of 1816.94242496 came in. All as expected so far but then there is something I don't understand. ALL my coins moved from Spendable to Stake for a while and then original amount + reward moved to Spendable, but the staking icon now reports - Not staking because you don't have mature coins. Why is that? How my mature coins became immature again? Did I setup something wrong? Makes no sense to me. Anybody?

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking.

-support team

[GhostMinerBox]

Please explain something to me. I send 1840000 coins to my windows wallet. 24 hours later it matured and it reported staking with 8 hours to go to the reward.  After about 10 hours reward of 1816.94242496 came in. All as expected so far but then there is something I don't understand. ALL my coins moved from Spendable to Stake for a while and then original amount + reward moved to Spendable, but the staking icon now reports - Not staking because you don't have mature coins. Why is that? How my mature coins became immature again? Did I setup something wrong? Makes no sense to me. Anybody?

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking.

-support team

unlocked for staking... what does that mean? how do i lock or unlock it for staking?

[bitcoin9999]

Please explain something to me. I send 1840000 coins to my windows wallet. 24 hours later it matured and it reported staking with 8 hours to go to the reward.  After about 10 hours reward of 1816.94242496 came in. All as expected so far but then there is something I don't understand. ALL my coins moved from Spendable to Stake for a while and then original amount + reward moved to Spendable, but the staking icon now reports - Not staking because you don't have mature coins. Why is that? How my mature coins became immature again? Did I setup something wrong? Makes no sense to me. Anybody?

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking.

-support team

unlocked for staking... what does that mean? how do i lock or unlock it for staking?

Under "Settings"  -->  Lock  for lock the wallet then no staking
Under "Setting" --> Unlock then staking

Of course you have to encrypt your wallet for lock and unlock to work

[GhostMinerBox]

Please explain something to me. I send 1840000 coins to my windows wallet. 24 hours later it matured and it reported staking with 8 hours to go to the reward.  After about 10 hours reward of 1816.94242496 came in. All as expected so far but then there is something I don't understand. ALL my coins moved from Spendable to Stake for a while and then original amount + reward moved to Spendable, but the staking icon now reports - Not staking because you don't have mature coins. Why is that? How my mature coins became immature again? Did I setup something wrong? Makes no sense to me. Anybody?

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking.

-support team

unlocked for staking... what does that mean? how do i lock or unlock it for staking?

Under "Settings"  -->  Lock  for lock the wallet then no staking
Under "Setting" --> Unlock then staking

Of course you have to encrypt your wallet for lock and unlock to work

OK, so unencrypted wallet is unlocked, meaning I should be fine for staking. Strange that yesterday it reported mature coins an today, after getting first reward it reports all of them as immature, but I will take your word for it that everything is OK and it's just a wallet bug.

[visale]

Please explain something to me. I send 1840000 coins to my windows wallet. 24 hours later it matured and it reported staking with 8 hours to go to the reward.  After about 10 hours reward of 1816.94242496 came in. All as expected so far but then there is something I don't understand. ALL my coins moved from Spendable to Stake for a while and then original amount + reward moved to Spendable, but the staking icon now reports - Not staking because you don't have mature coins. Why is that? How my mature coins became immature again? Did I setup something wrong? Makes no sense to me. Anybody?

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking.

-support team

unlocked for staking... what does that mean? how do i lock or unlock it for staking?

Under "Settings"  -->  Lock  for lock the wallet then no staking
Under "Setting" --> Unlock then staking

Of course you have to encrypt your wallet for lock and unlock to work

OK, so unencrypted wallet is unlocked, meaning I should be fine for staking. Strange that yesterday it reported mature coins an today, after getting first reward it reports all of them as immature, but I will take your word for it that everything is OK and it's just a wallet bug.

Yes that is right, you should unlock wallet and while unlocking it, there is option to check mark if you just want to unlock wallet for staking only

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking

-support team

[GhostMinerBox]

Please ignore staking weight, staking number of coins and time, they are yet to be configured in wallet. You still get payment every 24 hours if wallet is online and unlocked for staking

-support team

24 hours later from the first reward I received 0. Instead of the reward the coins started showing that wallet is staking again.
Let me know if you need logs or whatnot to identify the problem.

[PaulBrand]

Dear support,

My wallet is stuck syncing. Debug log shows:

Misbehaving: 104.162.206.79:33820 (3401 -> 3501)
ProcessBlock: ORPHAN BLOCK 531, prev=a3df3c49689721c9c7b29129c89777d003ea3b3957efb3ef6cc3e01df2fb7d6c
ProcessBlock: ORPHAN BLOCK 532, prev=38465d5cba64a2017923a537f497610efd8a4527510ba902f460b8ce8904365b

ProcessBlock: ORPHAN BLOCK 751, prev=4e3145e05460fb7a516ec902e8d81cd7581f85c45230ca3c248dec64a7752787
dseep - Asking source node for missing entry CTxIn(COutPoint(d70c24b63d, 0), scriptSig=)
ProcessBlock: ORPHAN BLOCK 751, prev=0d514649722389a8d561d5fc489ca209e659b13f837fa7c7d529c1301efa107e

I deleted the database and txleveldb and start syncing allover.

However, I keep getting the same errors.

Please help.

Regards,
Paul

[visale]

Dear support,

My wallet is stuck syncing. Debug log shows:

Misbehaving: 104.162.206.79:33820 (3401 -> 3501)
ProcessBlock: ORPHAN BLOCK 531, prev=a3df3c49689721c9c7b29129c89777d003ea3b3957efb3ef6cc3e01df2fb7d6c
ProcessBlock: ORPHAN BLOCK 532, prev=38465d5cba64a2017923a537f497610efd8a4527510ba902f460b8ce8904365b

ProcessBlock: ORPHAN BLOCK 751, prev=4e3145e05460fb7a516ec902e8d81cd7581f85c45230ca3c248dec64a7752787
dseep - Asking source node for missing entry CTxIn(COutPoint(d70c24b63d, 0), scriptSig=)
ProcessBlock: ORPHAN BLOCK 751, prev=0d514649722389a8d561d5fc489ca209e659b13f837fa7c7d529c1301efa107e

I deleted the database and txleveldb and start syncing allover.

However, I keep getting the same errors.

Please help.

Regards,
Paul

You should not had deleted anything from wallet, it is risky to do so.

You should backup wallet.dat file and then delete entire Linda folder. Then re install Linda and then replace the new wallet.dat file with the old backedup file
It can take about  entire day to sync due to heavy load

-support team

[PaulBrand]

Thanks support.

Of course, I made a backup of my wallet before anything.

Regards,
Paul

[bitcoin9999]

Thanks support.

Of course, I made a backup of my wallet before anything.

Regards,
Paul

congratulations for backing up your wallet.  did you double and triple backup of your wallet?  in case your cat eats your usb drive then you have a backup.  I have heard of stories where a toddler put the usb drive in the toilet.

[bismuth78]

Dear support,

My Masternode still not working yet.

I already have 30 million coins but I can not stake.

Please help me.

The contents of the debug log are as follows.


------------------------------------------------


2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'
2017-10-19 00:25:58 CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Could not find suitable coins!
2017-10-19 00:25:58 CActiveMasternode::Dseep() - Error: masternode is not in a running status
2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.0.1:51406, disconnecting
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'
2017-10-19 00:26:06 CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Could not find suitable coins!
2017-10-19 00:26:06 CActiveMasternode::Dseep() - Error: masternode is not in a running status
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.0.1:51407, disconnecting

-----------------------------------------------------

xxx.xxx.xxx.xxx = My External IP address
192.168.0.1 = Gateway of AP

It's the same problem on three days.

[bitcoin9999]

Dear support,

My Masternode still not working yet.

I already have 30 million coins but I can not stake.

Please help me.

The contents of the debug log are as follows.


------------------------------------------------


2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'
2017-10-19 00:25:58 CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Could not find suitable coins!
2017-10-19 00:25:58 CActiveMasternode::Dseep() - Error: masternode is not in a running status
2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.0.1:51406, disconnecting
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'
2017-10-19 00:26:06 CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Could not find suitable coins!
2017-10-19 00:26:06 CActiveMasternode::Dseep() - Error: masternode is not in a running status
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.0.1:51407, disconnecting

-----------------------------------------------------

xxx.xxx.xxx.xxx = My External IP address
192.168.0.1 = Gateway of AP

It's the same problem on three days.

You are not able to open the port 33820 ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'

[bismuth78]

Dear support,

My Masternode still not working yet.

I already have 30 million coins but I can not stake.

Please help me.

The contents of the debug log are as follows.


------------------------------------------------


2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'
2017-10-19 00:25:58 CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Could not find suitable coins!
2017-10-19 00:25:58 CActiveMasternode::Dseep() - Error: masternode is not in a running status
2017-10-19 00:25:58 CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.0.1:51406, disconnecting
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'
2017-10-19 00:26:06 CActiveMasternode::GetMasterNodeVin - Could not locate specified vin from possible list
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Could not find suitable coins!
2017-10-19 00:26:06 CActiveMasternode::Dseep() - Error: masternode is not in a running status
2017-10-19 00:26:06 CActiveMasternode::ManageStatus() - Error on Ping: masternode is not in a running statusconnected to self at 192.168.0.1:51407, disconnecting

-----------------------------------------------------

xxx.xxx.xxx.xxx = My External IP address
192.168.0.1 = Gateway of AP

It's the same problem on three days.

You are not able to open the port 33820 ManageStatus() - Checking inbound connection to 'xxx.xxx.xxx.xxx:33820'

I open all ports but still same problem ..

give me a tip Support!!!!

[visale]

Check if your 33820 and 33821 ports are opened or not on yougetsignal.com/tools/open-ports/

Make a new MN address and then send coins in single transaction to that new address. Wait for 15 confirmations and then start the masternode.

-support team

[GhostMinerBox]

As far as staking goes. I don't know if it's a bug or a feature. This is how it works in my wallet. After the coins in the wallet become mature after 24 hours the reward comes in some hours later, depending on the amount of staking coins, I guess. Once the reward comes in and added to the stake, ALL coins become immature and wallet is not staking for another 24 hours till ALL coins become mature again. Then again, after some hours another reward comes in and it goes all over again.

To me it's a bug. Makes no sense why staking coins go from mature to immature after the reward is added. Only added coins should be immature and then mature and add to the stake in 24 hours. Anyway, that's how it works right now.

I was going to buy more coins to created the MN but now I am thinking how well the wallet is programmed and will MN work without bugs.

[PaulBrand]

Dear Support,

Followed your advice. Deleted directory, re-installed, and again it is stuck:

IRC got who
receive version message: version 60032, blocks=156606, us=179.43.171.226:57386, them=91.234.60.227:33820, peer=91.234.60.227:33820
Added time data, samples 2, offset +0 (+0 minutes)
LevelDB batch commit failure: Invalid argument: not an sstable (bad magic number)
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED

Misbehaving: 47.94.234.198:33820 (0 -> 1)
ProcessMessage(dseep, 116 bytes) FAILED
Misbehaving: 120.26.214.210:33820 (0 -> 1)
ProcessMessage(dseep, 116 bytes) FAILED
receive version message: version 60032, blocks=156606, us=179.43.171.226:45920, them=45.76.222.103:33820, peer=45.76.222.103:33820
Added time data, samples 5, offset +0 (+0 minutes)
nTimeOffset = +0  (+0 minutes)
ProcessBlock: ORPHAN BLOCK 1, prev=f3d9be3bde9d432c38b014c127faca5ae037157080524302759d97074a3f01c2
ProcessBlock: ORPHAN BLOCK 2, prev=504faaac5ea1ec1c1017be404d35641127780b5312d66d551d16fea4d736538d
ProcessBlock: ORPHAN BLOCK 3, prev=dd482c9a8b0e952288b036d4e166cc5f9886d4815b1a5a6a3a50a0753f452ee0
receive version message: version 60032, blocks=156607, us=179.43.171.226:36686, them=47.94.234.198:33820, peer=47.94.234.198:33820
Added time data, samples 6, offset -16 (+0 minutes)
LevelDB batch commit failure: Invalid argument: not an sstable (bad magic number)
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED


ProcessBlock: ORPHAN BLOCK 306, prev=5a5b0bcfd2582164c9d6d2b07dc3fb72fce2c0312ad2af8b946341ac84d4f09a
ProcessBlock: ORPHAN BLOCK 307, prev=a820c10d3b32c77341bddfcdee9eb78ca793a8d39c7cfbf47942e6c9754d16a5
ProcessBlock: ORPHAN BLOCK 308, prev=827821fd3b14979ee32f43bbe792d3856e79fa28628110e93564757b9dee879b
addcon thread interrupt
dumpaddr thread stop
msghand thread interrupt
net thread interrupt
opencon thread interrupt
irc thread interrupted.
ThreadIRCSeed exited
irc thread exit
Shutdown : In progress...
StopNode()
Shutdown : done

Latest error:
************************
EXCEPTION: St13runtime_error       
init_blockindex(): error opening database environment Corruption: CURRENT file does not end with newline       
Z:\media\veracrypt6\cryptos\lindacoin\Linda-qt.exe in Runaway exception       

GUI: QPixmap::fromWinHICON(), failed to GetIconInfo() (Invalid cursor handle.)
GUI: QPixmap::fromWinHICON(), failed to GetIconInfo() (Invalid cursor handle.)
GUI: QPixmap::fromWinHICON(), failed to GetIconInfo() (Invalid cursor handle.)
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: libpng warning: iCCP: known incorrect sRGB profile
GUI: QCoreApplication::postEvent: Unexpected null receiver


Regards,
Paul

Dear support,

My wallet is stuck syncing. Debug log shows:

Misbehaving: 104.162.206.79:33820 (3401 -> 3501)
ProcessBlock: ORPHAN BLOCK 531, prev=a3df3c49689721c9c7b29129c89777d003ea3b3957efb3ef6cc3e01df2fb7d6c
ProcessBlock: ORPHAN BLOCK 532, prev=38465d5cba64a2017923a537f497610efd8a4527510ba902f460b8ce8904365b

ProcessBlock: ORPHAN BLOCK 751, prev=4e3145e05460fb7a516ec902e8d81cd7581f85c45230ca3c248dec64a7752787
dseep - Asking source node for missing entry CTxIn(COutPoint(d70c24b63d, 0), scriptSig=)
ProcessBlock: ORPHAN BLOCK 751, prev=0d514649722389a8d561d5fc489ca209e659b13f837fa7c7d529c1301efa107e

I deleted the database and txleveldb and start syncing allover.

However, I keep getting the same errors.

Please help.

Regards,
Paul

You should not had deleted anything from wallet, it is risky to do so.

You should backup wallet.dat file and then delete entire Linda folder. Then re install Linda and then replace the new wallet.dat file with the old backedup file
It can take about  entire day to sync due to heavy load

-support team

[seasonw]

Any working node for wallet? I have put addnode list at the OP into conf but all not working