-ck
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 16, 2013, 01:14:18 PM |
|
New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
MikeMike (OP)
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
June 16, 2013, 02:21:40 PM |
|
New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices.
Thanks!
|
|
|
|
arlington
|
|
June 16, 2013, 09:31:35 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
|
|
|
|
MikeMike (OP)
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
June 16, 2013, 09:40:11 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices.
|
|
|
|
arlington
|
|
June 16, 2013, 09:45:26 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
New cgminer version, 3.2.2, hopefully fixes a lot of bugs with the direct USB behaviour on these devices. but is there a way to make it working? seen a few posts say it works for them...
|
|
|
|
-ck
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 16, 2013, 10:02:39 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
It tells you why exactly there. You need to install a windows usb driver. As the docs say, you DO NOT USE THE FTDI DRIVER that other software uses, when using cgminer. You'll see exact instructions for it spelt out in the ASIC-README included with cgminer.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
arlington
|
|
June 16, 2013, 10:30:26 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
It tells you why exactly there. You need to install a windows usb driver. As the docs say, you DO NOT USE THE FTDI DRIVER that other software uses, when using cgminer. You'll see exact instructions for it spelt out in the ASIC-README included with cgminer. Should I uninstall the driver CP210x_VCP_Windows ?
|
|
|
|
-ck
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 16, 2013, 10:31:55 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
It tells you why exactly there. You need to install a windows usb driver. As the docs say, you DO NOT USE THE FTDI DRIVER that other software uses, when using cgminer. You'll see exact instructions for it spelt out in the ASIC-README included with cgminer. Should I uninstall the driver CP210x_VCP_Windows ? How about following the docs in ASIC-README? Step by step instructions, would you like me to read them out for you?
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
arlington
|
|
June 16, 2013, 10:50:45 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
It tells you why exactly there. You need to install a windows usb driver. As the docs say, you DO NOT USE THE FTDI DRIVER that other software uses, when using cgminer. You'll see exact instructions for it spelt out in the ASIC-README included with cgminer. Should I uninstall the driver CP210x_VCP_Windows ? How about following the docs in ASIC-README? Step by step instructions, would you like me to read them out for you? ok, calm down man, you seem to be irritated. I've been a long term user of your cgminer, so please be patient. If you don't want to answer my questions, just skip them, ok? Anyway thanks for the cgminer.
|
|
|
|
-ck
Legendary
Offline
Activity: 4242
Merit: 1644
Ruu \o/
|
|
June 16, 2013, 10:57:38 PM |
|
Alas I'm infamous for my impatience, but do scan the forums a lot. Ignore me.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
MikeMike (OP)
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
June 16, 2013, 10:58:45 PM |
|
I used cgminer 3.2.1 to connect to btcguild, but I get this error:
[2013-06-16 14:14:28] USB init, open device failed, err -12, you need to install a Windows USB driver for - AMU device 2:5 [2013-06-16 14:14:28] Icarus detect (2:5) failed to initialise (incorrect device?)
I did install the driver CP210x_VCP_Windows on my win8 PC, and the USB erupter works fine with Bitminter using its client.
My script is: cgminer-nogpu.exe -o stratum.btcguild.com:3333 -u xxxx -p yyyy
can someone help please.
It tells you why exactly there. You need to install a windows usb driver. As the docs say, you DO NOT USE THE FTDI DRIVER that other software uses, when using cgminer. You'll see exact instructions for it spelt out in the ASIC-README included with cgminer. Should I uninstall the driver CP210x_VCP_Windows ? How about following the docs in ASIC-README? Step by step instructions, would you like me to read them out for you? You can read them to me!
|
|
|
|
FiatKiller
|
|
June 16, 2013, 11:18:43 PM |
|
Alas I'm infamous for my impatience, but do scan the forums a lot. Ignore me.
I thought you were famous for your inpatients.
|
|
|
|
MikeMike (OP)
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
June 16, 2013, 11:41:33 PM Last edit: June 17, 2013, 12:00:48 AM by MikeMike |
|
Alas I'm infamous for my impatience, but do scan the forums a lot. Ignore me.
I thought you were famous for your inpatients. HEEEELLPPP!!!!!!!!!! I just realized I'm a trapped inpatient with impatience here!!! Gotta get out...I gotta get out..... m,,,.mmm...miners...I neeed more..mm..m miners..
|
|
|
|
LogicalUnit
|
|
June 17, 2013, 01:19:06 AM |
|
I can confirm that with proper cooling, the HW error rate of the Block Eruptor drops to a fraction of the rate without cooling. The Arctic Breeze USB fan is ideal for this, although you may have trouble fitting it into your USB hub. I used a separate USB power supply.
|
|
|
|
LogicalUnit
|
|
June 17, 2013, 02:13:44 AM |
|
I can confirm that with proper cooling, the HW error rate of the Block Eruptor drops to a fraction of the rate without cooling. The Arctic Breeze USB fan is ideal for this, although you may have trouble fitting it into your USB hub. I used a separate USB power supply.
Their fans were not doing the trick so....their idea did as errors rate dropped after mod. https://bitcointalk.org/index.php?topic=220905.msg2479246#msg2479246Actually, scratch what I said. I haven't run the rig long enough to see if the cooling affects the HW error rate this much. Watch this space.
|
|
|
|
FiatKiller
|
|
June 17, 2013, 10:05:46 AM |
|
Actually, like I said previously, I have 9 with the fan in a hub and one just plugged straight into the PC and while that one has one of the higher error rates, it is not the worst! I also tried throwing one in the fridge and then freezer for 20 mins and trying it and hashrate & error rate was the same as the others. Also, about the theory that they are too close - one of the worst error rate ones is right next to one of the best ones. So, I'm getting the impression that it's pretty random how each one performs, just like lemons come off car assembly lines and I can tell you from my job, that quality of workmanship is really the BIGGEST factor in how a product performs. Obviously, design and quality of materials are also huge factors.
|
|
|
|
2weiX
Legendary
Offline
Activity: 2058
Merit: 1005
this space intentionally left blank
|
|
June 17, 2013, 07:44:38 PM |
|
one hub bad, two hubs okay. still waiting for my anker. look how I added heatsinks. right now running at 3002GH/s with 0.057%HW.
|
|
|
|
LogicalUnit
|
|
June 18, 2013, 01:47:10 AM |
|
What's the formula to calculate HW error % rate? HW divided by A?
|
|
|
|
os2sam
Legendary
Offline
Activity: 3583
Merit: 1094
Think for yourself
|
|
June 18, 2013, 10:25:29 AM |
|
What's the formula to calculate HW error % rate? HW divided by A?
That is how I'm calculating it.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
LogicalUnit
|
|
June 18, 2013, 11:06:27 AM |
|
What's the formula to calculate HW error % rate? HW divided by A?
That is how I'm calculating it. In that case I'm getting about 0.8% error with cooling. Without cooling I'm getting 1.0% However, without cooling, my hashrate starts to drop after a couple of days. The fan seems to fix this.
|
|
|
|
|