|
palgin
|
 |
October 06, 2017, 11:59:29 AM |
|
Is there any way to get a bulited, runable version on Win 10 x64?
Chech krnlx github, Releases section |
BTC tips welcome: 16DHzyuqenEoHRA3w3YVGcYSDSHks7mor4
|
|
|
rednoW
Legendary
 Offline
Activity: 1510
Merit: 1003
|
|
October 06, 2017, 12:19:10 PM |
|
With Stock settings win10 x64:
EVGA GTX 1070
[2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 3106.90kH/s
[2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 0.025MH/W, 0.0017MH/Mhz
[2017-10-06 14:53:01] GPU#1:EVGA GTX 1070, 69C(F:49%) 1826/3802MHz(122W)
KFA2 gtx 1080
[2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 3820.32kH/s
[2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 0.02MH/W, 0.0021MH/Mhz
[2017-10-06 14:54:04] GPU#2:GeForce GTX 1080, 81C(F:78%) 1859/4513MHz(188W)
palit gamerock gtx1080 60%tdp 109W 4mH/s |
|
|
|
|
|
Vivik
|
|
October 06, 2017, 12:45:19 PM |
|
Krnlx,
Under CUDA8.0 difficult to adapt?
|
|
|
|
|
|
palgin
|
|
October 06, 2017, 01:08:36 PM |
|
Krnlx,
Under CUDA8.0 difficult to adapt?
You can build it with 7.5, 8.0 or 9.0 without any problem. Code is friendly to CUDA version bump. 9.0 is significantly faster than 8.0, didn't measure against 7.5. |
BTC tips welcome: 16DHzyuqenEoHRA3w3YVGcYSDSHks7mor4
|
|
|
|
e6ug
|
|
October 06, 2017, 01:09:11 PM |
|
Thanks for the miner!
|
|
|
|
mikebzh44
Newbie
Offline
Activity: 64
Merit: 0
|
|
October 06, 2017, 01:27:23 PM |
|
Anyone to give GTX 1060 6 Gb hashrate ?
Thanks.
|
|
|
|
|
ZenFr
Legendary
Offline
Activity: 1260
Merit: 1046
|
|
October 06, 2017, 01:42:06 PM |
|
Mining since yesterday night and Xevan pay not so much : just a little more than Dagger-Hashimoto in dual mode ith nVidia GPUs.
I'm a little disappointed
Otherwise, good devs work : the miner was runing all the night and no problem with differents GPUs.
|
|
|
|
|
anorganix
Copper Member
Sr. Member
Offline
Activity: 970
Merit: 287
Per aspera ad astra
|
|
October 06, 2017, 01:51:50 PM |
|
Anyone to give GTX 1060 6 Gb hashrate ?
Thanks.
Check stats on YiiMP. You should get between 2 - 2.4 MH/s depending on your settings. |
I will never send private messages with payment requests for my auctions. I only communicate transparently via the forum (not Telegram, Discord, Skype & others). Please be wary of scammers.
|
|
|
mikebzh44
Newbie
Offline
Activity: 64
Merit: 0
|
|
October 06, 2017, 01:53:14 PM |
|
Thanks.
|
|
|
|
|
|
brownfly
|
|
October 06, 2017, 01:59:41 PM |
|
krnlx, great work!  thank you. I will try your miner soon. regardless of profitability it will be good addition to miners family. Keep going!
|
|
|
|
|
Gaglam
|
|
October 06, 2017, 02:39:54 PM |
|
Krnlx,
Under CUDA8.0 difficult to adapt?
You can build it with 7.5, 8.0 or 9.0 without any problem. Code is friendly to CUDA version bump. 9.0 is significantly faster than 8.0, didn't measure against 7.5. where to find the 9.0 binary? |
|
|
|
|
|
Gaglam
|
|
October 06, 2017, 02:42:04 PM |
|
Mining since yesterday night and Xevan pay not so much : just a little more than Dagger-Hashimoto in dual mode ith nVidia GPUs.
I'm a little disappointed
Otherwise, good devs work : the miner was runing all the night and no problem with differents GPUs.
thats the problem, i'm also back to ZEC  but great miner anyway |
|
|
|
|
|
MarcusDe
|
|
October 06, 2017, 03:10:52 PM |
|
Good work, I was waiting for this long time :-)
12MH on 6x 1060 3GB rig.
Problem is it's far less profitable mining bitsend than using that rig on nicehash :-/
|
|
|
|
|
|
|
abudfv2008
|
|
October 06, 2017, 03:19:46 PM |
|
ccminer_x86 looks faster
1060 6Gb ~2500
1070 ~3500
1080 ~4350
|
|
|
|
|
|
car1999
|
|
October 06, 2017, 03:20:10 PM |
|
Krnlx,
Under CUDA8.0 difficult to adapt?
You can build it with 7.5, 8.0 or 9.0 without any problem. Code is friendly to CUDA version bump. 9.0 is significantly faster than 8.0, didn't measure against 7.5. can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig? upgrading all my rigs from cuda8 to cuda9 isn't a trivial work, a rig is dead during the upgrade, it cannot boot. |
|
|
|
|
|
palgin
|
|
October 06, 2017, 03:22:16 PM |
|
can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig?
All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. Ooops, you use *nix or Win? |
BTC tips welcome: 16DHzyuqenEoHRA3w3YVGcYSDSHks7mor4
|
|
|
|
Ryuh
|
|
October 06, 2017, 03:27:02 PM |
|
Finally miner for xevan, great job guys. Thank you for the hard work!
|
|
|
|
|
|
car1999
|
|
October 06, 2017, 03:28:32 PM |
|
can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig?
All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. Great, thanks. Does the CPU of build machine matter? I have G1840, g3900 ,g4560, e3 1231, which one is better to build the binary and copy to other rig with different CPU? I use ubuntu 16, nvOC. |
|
|
|
|
|
palgin
|
|
October 06, 2017, 03:52:24 PM |
|
can i build it against cuda9 and copy the binary to rigs with only cuda8 installed? does it run slower than cuda9 rig?
All you need is recent Nvidia driver with CUDA9 support, you won't need any toolkits installed. Great, thanks. Does the CPU of build machine matter? I have G1840, g3900 ,g4560, e3 1231, which one is better to build the binary and copy to other rig with different CPU? I use ubuntu 16, nvOC. For *nix it will be a problem (running without reboot), if you already have recent drivers installed, you can ask someone to build binary for you and just update, but if you need to update driver or want to install toolkit and build from scratch - as I know you'll need to reboot at least 1 time. If access is only remote it's quite risky, especially regarding driver module update. CPU matters, so if you want to build it for all variety of hardware you need to remove "-march=native" flag from configure.sh file. P.S: I'm not so experienced in *nix, it's just what I remember |
BTC tips welcome: 16DHzyuqenEoHRA3w3YVGcYSDSHks7mor4
|
|
|
|
