[ANN] Elite [MANDATORY UPDATE] 1.337% APR | POS ONLY

[xenonflux]

Can you give me the link of the white paper? Thanks

Hi, there is no white paper yet but i am looking into that.

[1713852403]

1713852403

[1713852403]

1713852403

[xenonflux]

So, what is the roadmap and dates on the gaming platform to manifest?

Hi, could you elaborate your question.

[paramind22]

So, what is the roadmap and dates on the gaming platform to manifest?

Hi, could you elaborate your question.

I thought I read that Elite was going to be partnered with some online gaming companies.

[nur1labs]

no pos pool 

[xenonflux]

So, what is the roadmap and dates on the gaming platform to manifest?

Hi, could you elaborate your question.

I thought I read that Elite was going to be partnered with some online gaming companies.

It hasn't been announced officially but we are looking into the possibilities.

[xenonflux]

no pos pool 

Hi, there is no official pool yet.

[Koal-84]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

[xenonflux]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

[heocon571]

Potential project, but I would take extra consideration about invest

[xenonflux]

@everyone New designs (couple of baby specials) are now available in the Elite accessories store. Currently, everything is 30% off http://tee.pub/lic/elitecoinstore . Cheers!

[Koal-84]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

Hello,

when i compile the wallet with this settings the compile is OK, but i can't open the wallet:

Code:

sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev at-spi2-core
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

cd /home/pi
sudo git clone https://github.com/xenonflux/1337
cd 1337

sudo chmod +x src/leveldb/build_detect_platform

sudo qmake
sudo make

Then i have this error, i think one of the paket are wrong?



regards

[xenonflux]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

Hello,

when i compile the wallet with this settings the compile is OK, but i can't open the wallet:

Code:

sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev at-spi2-core
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

cd /home/pi
sudo git clone https://github.com/xenonflux/1337
cd 1337

sudo chmod +x src/leveldb/build_detect_platform

sudo qmake
sudo make

Then i have this error, i think one of the paket are wrong?

regards

You're close. Try starting it again with ./Elite-qt and if you get the same error, go to your /home/pi/.1337 and delete everything except wallet.dat and try restarting your wallet.

[Koal-84]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

Hello,

when i compile the wallet with this settings the compile is OK, but i can't open the wallet:

Code:

sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev at-spi2-core
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

cd /home/pi
sudo git clone https://github.com/xenonflux/1337
cd 1337

sudo chmod +x src/leveldb/build_detect_platform

sudo qmake
sudo make

Then i have this error, i think one of the paket are wrong?

regards

You're close. Try starting it again with ./Elite-qt and if you get the same error, go to your /home/pi/.1337 and delete everything except wallet.dat and try restarting your wallet.

Same error, also the same after,

sudo chmod 755 Elite-qt

Regards

[xenonflux]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

Hello,

when i compile the wallet with this settings the compile is OK, but i can't open the wallet:

Code:

sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev at-spi2-core
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

cd /home/pi
sudo git clone https://github.com/xenonflux/1337
cd 1337

sudo chmod +x src/leveldb/build_detect_platform

sudo qmake
sudo make

Then i have this error, i think one of the paket are wrong?

regards

You're close. Try starting it again with ./Elite-qt and if you get the same error, go to your /home/pi/.1337 and delete everything except wallet.dat and try restarting your wallet.

Same error, also the same after,

sudo chmod 755 Elite-qt

Regards

Have you tried the qt which i compiled? You can download it from the github or the official website. Haven't tested that on pi though.

[Koal-84]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

Hello,

when i compile the wallet with this settings the compile is OK, but i can't open the wallet:

Code:

sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev at-spi2-core
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

cd /home/pi
sudo git clone https://github.com/xenonflux/1337
cd 1337

sudo chmod +x src/leveldb/build_detect_platform

sudo qmake
sudo make

Then i have this error, i think one of the paket are wrong?

regards

You're close. Try starting it again with ./Elite-qt and if you get the same error, go to your /home/pi/.1337 and delete everything except wallet.dat and try restarting your wallet.

Same error, also the same after,

sudo chmod 755 Elite-qt

Regards

Have you tried the qt which i compiled? You can download it from the github or the official website. Haven't tested that on pi though.

No, you have a Link? I can't find other than for Ubuntu...

This is my compile Debian stretch file... but always the same error...

Code:

https://www.file-upload.net/download-13090318/Elite-qt.zip.html

[xenonflux]

Anyone have a running 2.0 Wallet on his Raspberry Pi?

i can't compile, always

...
src/bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
src/bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                       ^
Makefile:1431: recipe for target 'build/txdb-leveldb.o' failed
make: *** [build/txdb-leveldb.o] Error 1
pi@raspberrypi:~/1337 $

THX

Hi, please contact me on Discord or Telegram and i could help you debug the compile error.

Hello,

when i compile the wallet with this settings the compile is OK, but i can't open the wallet:

Code:

sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev at-spi2-core
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2

cd /home/pi
sudo git clone https://github.com/xenonflux/1337
cd 1337

sudo chmod +x src/leveldb/build_detect_platform

sudo qmake
sudo make

Then i have this error, i think one of the paket are wrong?

regards

You're close. Try starting it again with ./Elite-qt and if you get the same error, go to your /home/pi/.1337 and delete everything except wallet.dat and try restarting your wallet.

Same error, also the same after,

sudo chmod 755 Elite-qt

Regards

Have you tried the qt which i compiled? You can download it from the github or the official website. Haven't tested that on pi though.

No, you have a Link? I can't find other than for Ubuntu...

This is my compile Debian stretch file... but always the same error...

Code:

https://www.file-upload.net/download-13090318/Elite-qt.zip.html

I doubt the compiled qt will work on pi. Could you try with openssl 1.0.1l.

[Koal-84]

I doubt the compiled qt will work on pi. Could you try with openssl 1.0.1l.

You have a HowTo for the downgrade?

[xenonflux]

I doubt the compiled qt will work on pi. Could you try with openssl 1.0.1l.

You have a HowTo for the downgrade?

Could you PM me on Discord (https://discord.gg/np7BmKV) or Telegram (https://t.me/elitecoinofficial) .

[xenonflux]

@everyone FAH payout details for this week https://www.reddit.com/r/1337Foundation/comments/8dq0fp/fh_payout_update_04202018/

[xenonflux]

@everyone I know some of you are curious regarding the status of Elite Minecraft server so just wanted to let you guys know that I have started the development. Once the server is ready, players will be able to use Elite as an in-game currency to purchase lands, transfer etc. Cheers!