✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS!

[lazy_boozer]

lazy_boozer,

can you tell me why the masternode starts, but goes expired after 1 hour, so i can try and fix the issue im having

We'll try to figure out when we find a solution, we'll let you know.

[lazy_boozer]

Why can't synchronize, stuck in the 9061 block

restart the wallet

[lanhho1006]

How many coin on reward?

[index932]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

[captainbluff]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

[index932]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

[captainbluff]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

yes just take this portion

4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7 1

[defyance]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7 1

[cryptojai]

It seems many people complaint about masternode not working . Does masternode working fine for anyone ? if, can you tell me which cloud service are you using to host mn ?

[candyiman]

My masternod appears as Enabled in the ALl masternode tab   the time "last seen " is correkt


But i have non received a payment since about 7 or more hours Not sure if its normal or  not


masternode debug  in debug mode

says tat Masternode startet succesfull


Please send email to mnrank.com to correkt   the price per Coin it appears as 5,5 wich is not

[Yankeeruinx]

Hi just started following this project, will you be applying for listing on CMC anytime soon to coincide with the Yobit listing now that they have added Coinsmarket as one of their tracked exchanges?

[index932]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7 1

Thank you! It is preenabled now!

Is it possible to create multiple nodes and enable them via single controller wallet?

[captainbluff]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7 1

Thank you! It is preenabled now!

Is it possible to create multiple nodes and enable them via single controller wallet?

For Desire MN, I don't think it's possible to have more than 1 MN per public IP.

[index932]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7 1

Thank you! It is preenabled now!

Is it possible to create multiple nodes and enable them via single controller wallet?

For Desire MN, I don't think it's possible to have more than 1 MN per public IP.

Right, i tried for 3 nodes and one started and other two went missing, for the same public IP. I will try if any other method works. Thank you!

[thethunderbird]

Hello there,

I try to setup a vps masternode, i used the setup of the linux wallet at the first post of this thread :
https://masternodes.github.io/vps/docs/masternode_vps.html

when i try to startup the wallet using: /usr/local/bin/restart_masternodes.sh

I get error message: " Job for desire_n1.service failed because the control
process exited with error code. See "systemctl status
desire_n1.service" and "journalctl -xe" for details."

so could you help me guys please

or is there any other tutorial to setup vps desire wallet other than that one on the first post of this thread

[defyance]

I have setup MN on a VPS and trying to configure my masternode.config at my local controller wallet.

In the below format, what does
COLLATERAL_TX_FOR_desireMN1
&
OUTPUT_NO_FOR_desireMN1
means?

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

the command "masternode outputs" will give you what you need

I get this when i run masternode outputs

{
  "4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7": "1"
}

so what should i substitute  these two with? COLLATERAL_TX_FOR_desireMN1 OUTPUT_NO_FOR_desireMN1

Format:
desireMN1 IP:9919 MASTERNODE_PRIVKEY_FOR_desireMN1 4MASKEDXXXXXXXXXXXXXXXXXXXXXXXMASKEDXXXXXXXXXXXXX7 1

Thank you! It is preenabled now!

Is it possible to create multiple nodes and enable them via single controller wallet?

For Desire MN, I don't think it's possible to have more than 1 MN per public IP.

Right, i tried for 3 nodes and one started and other two went missing, for the same public IP. I will try if any other method works. Thank you!

you cannot change the port number of the node because 9919 is hard coded in the wallet. so you can only run one masternode per external IP

[dattt]

when you plan to exit the coins in yobit?

[kurniawan05]

I will try to participate in bounties, i will pm you soon, thank you.

[Taurus63]

New bounty!+ 5 DSR for you

https://twitter.com/gate_io/status/918909188272787457

https://i.imgur.com/NlR1S4L.png

1. Write in the comments to this tweet that you need to add Desire.

2. Make a screenshot and send it along with the address for bounties to me in the PM.

Thanks for the bounty

[kang_kung]

when you plan to exit the coins in yobit?

Yobit list fee is 1000$ if I remenber it right.