✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS!

[boumacor]

I ran into some problems with my VPS Desire masternode, I've set it up according to this howto ==> http://www.bittcoinwatch.com/how-to-setup-desire-masternode/ with a 4 GB Swapfile and opened the ports in the firewall. According to the masternode status command (on both the vps and windows local wallet) the masternode is working.

For some reason it seems when I close my local windows wallet, after a while the masternode stops. When I start my windows wallet (after 2 hours) it looks like my masternode starts again. According to the masternode list in my wallet the node starts every morning when I check my status. This doesn't seem right and is perhaps the main cause that there are no any payouts to my DSR wallet. In my wallet D8bncVdYyhGprL8nJpt63ks9QTvaGGvvg8 there is an exact amount of 1000.00 DSR so this seems to be ok. The VPS masternode is at 185.92.222.249:9919. I've reinstalled the VPS today and started it 10 hours ago. Just when I came back a hour ago and check the status, the windows wallet told me the masternode was 00h:01m:06s active and it should be a least 9 hrs.

Accoring to my information this should not be happening and perhaps I'm doing something wrong, any idea how to fix this ?

I have done the same and used the same guide... However I haven't done every steps from it.

On my local windows wallet, the desire.conf file is blank and only the masternode.conf file is edited.
On my VPS wallet, only the desire.conf file is edited, the masternode.conf untouched.

You definitely don't want to put the 'masternode=1' in your local wallet desire.conf file...

I would suggest to delete everything from the desire.conf file on your windows local wallet.

Thanks for the info, just checked and on my windows system there is a desire.conf with masternode=1. I've comment out everything and started the wallet. On the masternode tab it now shows that masternode is up for 12h (just started my windows system) so this looks good  !. On the masternode itself useing ./desire-cli masternode list it shows the status is WATCHDOG_EXPIRED. It shows the same on the local wallet. Does this mean I need the restart the sentinal ? Or is this optional and doesn't do anything for the masternode and payouts ?

[szfinx]

I ran into some problems with my VPS Desire masternode, I've set it up according to this howto ==> http://www.bittcoinwatch.com/how-to-setup-desire-masternode/ with a 4 GB Swapfile and opened the ports in the firewall. According to the masternode status command (on both the vps and windows local wallet) the masternode is working.

For some reason it seems when I close my local windows wallet, after a while the masternode stops. When I start my windows wallet (after 2 hours) it looks like my masternode starts again. According to the masternode list in my wallet the node starts every morning when I check my status. This doesn't seem right and is perhaps the main cause that there are no any payouts to my DSR wallet. In my wallet D8bncVdYyhGprL8nJpt63ks9QTvaGGvvg8 there is an exact amount of 1000.00 DSR so this seems to be ok. The VPS masternode is at 185.92.222.249:9919. I've reinstalled the VPS today and started it 10 hours ago. Just when I came back a hour ago and check the status, the windows wallet told me the masternode was 00h:01m:06s active and it should be a least 9 hrs.

Accoring to my information this should not be happening and perhaps I'm doing something wrong, any idea how to fix this ?

I have done the same and used the same guide... However I haven't done every steps from it.

On my local windows wallet, the desire.conf file is blank and only the masternode.conf file is edited.
On my VPS wallet, only the desire.conf file is edited, the masternode.conf untouched.

You definitely don't want to put the 'masternode=1' in your local wallet desire.conf file...

I would suggest to delete everything from the desire.conf file on your windows local wallet.

Thanks for the info, just checked and on my windows system there is a desire.conf with masternode=1. I've comment out everything and started the wallet. On the masternode tab it now shows that masternode is up for 12h (just started my windows system) so this looks good  !. On the masternode itself useing ./desire-cli masternode list it shows the status is WATCHDOG_EXPIRED. It shows the same on the local wallet. Does this mean I need the restart the sentinal ? Or is this optional and doesn't do anything for the masternode and payouts ?

That is a bit trickier question. When I followed that guide, I have done the sentinel a bit differently.
I have installed tux and started Sentinel on a tux process where it is running in the background all the time.

Try the following after followed the Linux part of the guide and installed Sentinel.

sudo apt install tmux htop
tmux new -s sentinel
cd ~/.desirecore
./sentinel-lin64

Once sentinel is running, wait a few minutes and press CTL+B then D. That should send the session to the background and you are back on the terminal.

Type htop to see all the process running on the VPS. You should see 'tmux sentinel' in that list. Your status will switch to ENABLED within 30 minutes.

But I read somewhere in the Discord, if the uptime is increasing then you should get reward regardless of the status.. I haven't tested it, looks better with Enabled.

[junior.masters]

Guys, im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??

[S3nsati0n]

Guys, im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??

What IP address did you use in the Desire.conf file on your local windows wallet?
Make sure this is VPS IP "externalip=VPS_IP:9919"

[bifking]

I didn't realize that about crypto-coinz (unreal block reward)

Is there another calculator that has desire? Whattomine doesn't have it...

[junior.masters]

Guys, im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??

What IP address did you use in the Desire.conf file on your local windows wallet?
Make sure this is VPS IP "externalip=VPS_IP:9919"

yes it is,
and it shows on My Masterdnode tab just fine, the thing is at the "Active" field, if i close and open local wallet, allways reset to "00:00", and the time only keeps counting if i keep wallet open, thats normal?
and btw, how much payments/day should i receive?
tks

[ShowMeCoins]

Guys, im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??

What IP address did you use in the Desire.conf file on your local windows wallet?
Make sure this is VPS IP "externalip=VPS_IP:9919"

yes it is,
and it shows on My Masterdnode tab just fine, the thing is at the "Active" field, if i close and open local wallet, allways reset to "00:00", and the time only keeps counting if i keep wallet open, thats normal?
and btw, how much payments/day should i receive?
tks

Yep, it should be running constantly. Prefereably 24x7x365. It even needs to be running for 2+ hours to be considered as a receiving masternode. Better use a VPS or maybe a PI.

[Stepan163]

guys, I did everything on the tool, created a file configuration, but there are some problems.
https://media.discordapp.net/attachments/390690662183469058/390853320606220293/20171214171053.png
https://media.discordapp.net/attachments/390690662183469058/390856270376337429/20171214172131.png


Ports are flown, the master does not start.

[junior.masters]

Guys, im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??

What IP address did you use in the Desire.conf file on your local windows wallet?
Make sure this is VPS IP "externalip=VPS_IP:9919"

yes it is,
and it shows on My Masterdnode tab just fine, the thing is at the "Active" field, if i close and open local wallet, allways reset to "00:00", and the time only keeps counting if i keep wallet open, thats normal?
and btw, how much payments/day should i receive?
tks

Yep, it should be running constantly. Prefereably 24x7x365. It even needs to be running for 2+ hours to be considered as a receiving masternode. Better use a VPS or maybe a PI.

the thing is, i am running a VPS! my question is that even with a vps running, the Active time showed on local wallet still resets to 00:00 if i close it, thats normal?

[S3nsati0n]

the thing is, i am running a VPS! my question is that even with a vps running, the Active time showed on local wallet still resets to 00:00 if i close it, thats normal?

No, it should not reset to 00:00. If you close your wallet for 2 hours, the Active time should be 2 hours if you reopen your wallet. Can you post your local Desire.conf configuration, maybe there is something wrong there.

[junior.masters]

the thing is, i am running a VPS! my question is that even with a vps running, the Active time showed on local wallet still resets to 00:00 if i close it, thats normal?

No, it should not reset to 00:00. If you close your wallet for 2 hours, the Active time should be 2 hours if you reopen your wallet. Can you post your local Desire.conf configuration, maybe there is something wrong there.

this is my local desire.conf:

rpcuser=myuser
rpcpassword=mypass
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=80.208.227.121:9919
masternode=1
masternodeprivkey=myprivkey

--- and this is my vps desire.conf:

rpcuser=myuser
rpcpassword=mypass
rpcallowip=127.0.0.1
rpcport=9918
listen=1
server=1
daemon=1
staking=0
externalip=80.208.227.121:9919
masternode=1
masternodeprivkey=myprivkey

--

[szfinx]

Guys, im having a weird issue, seems like my MN only works when i open my windows local wallet, if i keep it closed i didnt receive rewards, but my MN is on a VPS, anyone know what i need to check? or windows local wallet must be open all the time??

What IP address did you use in the Desire.conf file on your local windows wallet?
Make sure this is VPS IP "externalip=VPS_IP:9919"

yes it is,
and it shows on My Masterdnode tab just fine, the thing is at the "Active" field, if i close and open local wallet, allways reset to "00:00", and the time only keeps counting if i keep wallet open, thats normal?
and btw, how much payments/day should i receive?
tks

Yep, it should be running constantly. Prefereably 24x7x365. It even needs to be running for 2+ hours to be considered as a receiving masternode. Better use a VPS or maybe a PI.

the thing is, i am running a VPS! my question is that even with a vps running, the Active time showed on local wallet still resets to 00:00 if i close it, thats normal?

Maybe check the forum would be a good start... I have explained what to do and why this issue happen just a post above yours....
If you don't bother to read the post above yours then don't expect help.

[szfinx]

the thing is, i am running a VPS! my question is that even with a vps running, the Active time showed on local wallet still resets to 00:00 if i close it, thats normal?

No, it should not reset to 00:00. If you close your wallet for 2 hours, the Active time should be 2 hours if you reopen your wallet. Can you post your local Desire.conf configuration, maybe there is something wrong there.

this is my local desire.conf:

rpcuser=myuser
rpcpassword=mypass
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
externalip=80.208.227.121:9919
masternode=1
masternodeprivkey=myprivkey

--- and this is my vps desire.conf:

rpcuser=myuser
rpcpassword=mypass
rpcallowip=127.0.0.1
rpcport=9918
listen=1
server=1
daemon=1
staking=0
externalip=80.208.227.121:9919
masternode=1
masternodeprivkey=myprivkey

--

Read the previous posts.. I won't tell it again...

[junior.masters]

Read the previous posts.. I won't tell it again...
[/quote]

just read now, sry man, now makes sense, local wallet should be with masternode.conf info and desire.conf blank, and VPS wallet should be desire.conf info and masternode.conf blank
i will try to help those people having the same issue on discord

thanks!

[szfinx]

Read the previous posts.. I won't tell it again...

just read now, sry man, now makes sense, local wallet should be with masternode.conf info and desire.conf blank, and VPS wallet should be desire.conf info and masternode.conf blank
i will try to help those people having the same issue on discord

thanks!
[/quote]

Sorry for being rude :-) If you can help the others that would be fantastic.

[lazy_boozer]

So, we chose the winner of the second week.
Win #masternode DFEbUN2BHBMASh7fRbRMQP7EPjr9EuFYDC
Congratulations to the winner.
https://twitter.com/xapador/status/940300455523110913 …
@xapador @DesireCoin $DSR #cryptocurrency #Bitcoin


https://twitter.com/DesireCoin/status/941336789976940546

[MistGold]

I didn't realize that about crypto-coinz (unreal block reward)

Is there another calculator that has desire? Whattomine doesn't have it...

just -20% and it will be fine :d

[bskc]

Dear Desire community,

UniMining.net has a dedicated port for Desire.
We strongly advise to adapt your configurations.

UniMining.net
Dedicated Port 4234 (DSR Only)

If you encounter errors mining Desire coin (DSR) on neoscrypt port 4233, please mine it on port 4234.
Stratum port 4234 is dedicated ONLY for Desire coin.
For more details: https://forum.unimining.net/viewtopic.php?f=2&t=160

Example (ccminer):

Code:

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4234 -u Your_DESIRE_Wallet_Address -p c=DSR --cpu-priority=3

For any problem, please report on:
https://bitcointalk.org/index.php?topic=2156784
https://twitter.com/unimining
https://discord.gg/ZWup8Jx

[Giacomo387]

https://twitter.com/DesireCoin/status/936252144549740544

http://imghost.io/images/2017/11/30/BEZYMYNNYI.png

New Desire masternode running cq online (my first mn ever):   DDrqbYaJuTo7AWtTGtRtCtAxfMMC71q9d7

[mighkel]

Hey there,

Looking to help in anyway I can. Do you guys need graphics or basic web dev work?

Cheers