$100 USD/day with one 6x1080 Rig [Best kept secret]

[nostrakhan]

I'm going to give it a shot. I never did solo mining so far. So few questions, I download the wallet, sync it up and run miner. But where to configure my payout address? In the miner itself like we do in pools or it's automatically deducts the wallet address that is installed in the system ?

If you want to solo miner then check post #5 in this thread for instructions https://bitcointalk.org/index.php?topic=2291865.msg23261786#msg23261786.  You mine directly to your wallet, you don't have to put an address anywhere.

Be prepared to not hit a block for a very long time solo mining unless you have a lot of hash power.

[kriskarthik]

If you want to solo miner then check post #5 in this thread for instructions https://bitcointalk.org/index.php?topic=2291865.msg23261786#msg23261786.  You mine directly to your wallet, you don't have to put an address anywhere.

Be prepared to not hit a block for a very long time solo mining unless you have a lot of hash power.

Thanks mate!! I have 8X1070 and I was hitting 240MHps in ETH. I probably will hit around 500MHps here I think. I'll try it out tonight and let know my luck lol

[nostrakhan]

If you want to solo miner then check post #5 in this thread for instructions https://bitcointalk.org/index.php?topic=2291865.msg23261786#msg23261786.  You mine directly to your wallet, you don't have to put an address anywhere.

Be prepared to not hit a block for a very long time solo mining unless you have a lot of hash power.

Thanks mate!! I have 8X1070 and I was hitting 240MHps in ETH. I probably will hit around 500MHps here I think. I'll try it out tonight and let know my luck lol

You're welcome.  You should be around 1 gh/s with 8 1070s I think.  You'll probably average 1 block / day or so.

[kriskarthik]

I was getting around 500-600MHps. I really wish 1GHps haha, may be possible with some overclocking. Anyone has  on the OC settings for Asus GTX 1070?

And After running for few hours, I noticed there is a latency and I'm mining old blocks lol, off by 40-50 blocks. Need to check that as well.

[Vann]

I'm using +100 MHz core clock, -500 MHz memory clock at 70% power limit with a Zotac AMP! Extreme 1070 and get ~150 MH/s. My GTX 1080 gets ~170 MH/s.

[dedekganool]

I try to open link pool and is say error gateway

[Luisjc69]

Anyone can put here the config for mine Neox please?

I try really with both pools eu/us, and i can join in the pool, but the miner restart 2sec after joining in the pool!

I try also different miners (wolf0, SKminer, solo and pool)

Only with the eu/us pool .ru is connected, but after connect restart ...and this every 2sec!

[allcryptominer]

Anyone can put here the config for mine Neox please?

I try really with both pools eu/us, and i can join in the pool, but the miner restart 2sec after joining in the pool!

I try also different miners (wolf0, SKminer, solo and pool)

Only with the eu/us pool .ru is connected, but after connect restart ...and this every 2sec!

Did you update to latest Nvidia drivers? I'm mining right now at us pool with skminer without problem.

This is from there website:

"Important! If you encounter infinite "timeout loop" please consider updating nvidia drivers".

[allcryptominer]

with 4 1080ti (953mh/s) better to mine in the pool or go solo?

Not sure. Been mining solo for 3 days with 700mh/s and found 1 block. Just started pool mining a few hours ago and looks like I'm about to earn 8-9 coins/24h.

Not very profitable.

[pauerdragz]

wow. want to put some money aside to build one of these things...

[nannu968]

very interesting, but need proper instructions with details information.
I'm searching an exchange site for this coin.

[Luisjc69]

Anyone can put here the config for mine Neox please?

I try really with both pools eu/us, and i can join in the pool, but the miner restart 2sec after joining in the pool!

I try also different miners (wolf0, SKminer, solo and pool)

Only with the eu/us pool .ru is connected, but after connect restart ...and this every 2sec!

Did you update to latest Nvidia drivers? I'm mining right now at us pool with skminer without problem.

This is from there website:

"Important! If you encounter infinite "timeout loop" please consider updating nvidia drivers".

Thank you, but really i have the new driver installed

Only is the restarts the big problem...after connected to the pool!

[Coffee135]

Yesterday I had problems connecting to the pool. I was connected but after I joined the mining pool went in a regular mode. Probably this was due to the overflow of the pool. But I think that $ 100 a day to install 6 GPU I think it's fake. I don't believe in such indicators.

[garytheasshole]

Yesterday I had problems connecting to the pool. I was connected but after I joined the mining pool went in a regular mode. Probably this was due to the overflow of the pool. But I think that $ 100 a day to install 6 GPU I think it's fake. I don't believe in such indicators.

it's not fake, when the pool goes down, the diff goes down dramatically, so during that time frame if you're solo mining you get to instamine some blocks. Look at the diff on the screenshots its only 98, while usually the diff moves from 4-7k

[Deathwing]

It does not seem to yield after this thread as it seems. Lucky if you can get a block in 24 hours. Which is about $11, mining somewhere else will yield a lot higher.

[garytheasshole]

Can't believe the amount of people that still don't understand mining difficulty.

[kikhtr]

Thanks for your information! Can you tell me how much GTX 1060 3GB can hash? Thanks!

[blmer]

Yesterday I had problems connecting to the pool. I was connected but after I joined the mining pool went in a regular mode. Probably this was due to the overflow of the pool. But I think that $ 100 a day to install 6 GPU I think it's fake. I don't believe in such indicators.

it's not fake, when the pool goes down, the diff goes down dramatically, so during that time frame if you're solo mining you get to instamine some blocks. Look at the diff on the screenshots its only 98, while usually the diff moves from 4-7k

This is just a lucky chance. I do not think that will always happen like this

[Mattthev]

Thanks for your information! Can you tell me how much GTX 1060 3GB can hash? Thanks!

I have 6x 1060 3GB doing 450MH/s still finding best settings.
Does anybody know how to run the newest SKminer 1.1? I can't get it run... it uses CUDA 9.
https://www.dropbox.com/s/0mjqtso7z5ethfr/SKMiner-Pool-V1.1.zip?dl=0

[kalymist]

Why don't you use them into mining XMR's rather than Zcash? I'm earning at least $1 to 2$ with my 2x 1080ti on my own mining rig.

LMAO


Yes most def monero is a great coin to mine.