dunedainbob
|
|
October 30, 2017, 04:06:58 PM |
|
Like people are saying, nethash is 130 kH/s. So need to be patient in solo mining. There are only 720 blocks generated each day (on average). This is a very low supply coin.
|
|
|
|
butmuncher
|
|
October 30, 2017, 04:09:25 PM |
|
Been mining for like 20 hours and still no block.. { "blocks" : 1330, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.00392710, "errors" : "", "genproclimit" : 4, "networkhashps" : 130638, "pooledtx" : 0, "testnet" : false, "generate" : true, "hashespersec" : 336 } average 4 x 15khash 2500k average x12 10khash 5820k Same here, 5920k and a 2500k, nothing in about the same time. How much hashrate do u have? Network hashrate is now 130k.
|
DKqZzd1CRBEy4sMgbHV7NR3toaY72UMXuC DIXIHUB
|
|
|
JC1DA
|
|
October 30, 2017, 04:55:17 PM |
|
Been mining for like 20 hours and still no block.. { "blocks" : 1330, "currentblocksize" : 1000, "currentblocktx" : 0, "difficulty" : 0.00392710, "errors" : "", "genproclimit" : 4, "networkhashps" : 130638, "pooledtx" : 0, "testnet" : false, "generate" : true, "hashespersec" : 336 } average 4 x 15khash 2500k average x12 10khash 5820k Same here, 5920k and a 2500k, nothing in about the same time. How much hashrate do u have? Network hashrate is now 130k. 15KH? I think you are running a wrong algorithm.
|
|
|
|
cryptonomicon25
Member
Offline
Activity: 460
Merit: 12
|
|
October 30, 2017, 05:03:46 PM |
|
Yes, if your hashrate is above 10k you are probably solving Yescrypt, this coin uses YescryptR16. It's a new algorithm so you have to either use the minerd version provided by the dev or mine through the wallet.
|
|
|
|
oldcoinguru
|
|
October 30, 2017, 05:24:59 PM |
|
does anyone know if the standard cpuminer multi will mine this coin or is it a different algo than standard yescrypt.
It is not the standard yescrypt. So for now you must use minerd (I don't really know how that works, so I can't explain it). http://coinsmarkets.com/trade-BTC-YTN.htm I recommend no one really sell at 500 sats. Keep in mine the total supply right now is only about 66,000 YTN; there is no premine. A no-premine new-algo project is worth at least $50k USD in my opinion. This is not me trying to overstate by any means - SIGT hit $1 million + market cap in its early days. So I think $50k is probably a super-low-end estimate. If you spread $50k over 100,000 YTN (accounts for supply growth from 66,000), then divide by $6000 price of BTC, you get about a 8000 sats price. So the sell orders are roughly right, but the buy orders need to come up to match it. If this project ends up growing in the next 3-4 weeks because of the algo, it could go 2x-10x, but that is obviously a big risk that needs to be priced in. It's yescrypt with minor changes. The coin itself is a clone of this coin launched in 2014 Bitzeny https://bitcointalk.org/index.php?topic=849994.0 https://github.com/bitzeny/bitzenyThere is already a GPU miner for yescrypt and the minor changes in yescryptr16 are easily made to that miner.
|
|
|
|
butmuncher
|
|
October 30, 2017, 05:39:01 PM |
|
Sorry. Missed the 0.15, 0.10
|
DKqZzd1CRBEy4sMgbHV7NR3toaY72UMXuC DIXIHUB
|
|
|
cryptonomicon25
Member
Offline
Activity: 460
Merit: 12
|
|
October 30, 2017, 05:56:53 PM |
|
According to the dev GPU mining is slower than CPU so it might not even worth creating a GPU miner for this algorithm. I can't verify if this is true, though, since the dev hasn't provided many details.
|
|
|
|
ybelevi
Member
Offline
Activity: 132
Merit: 10
|
|
October 30, 2017, 06:00:33 PM |
|
|
|
|
|
cryptonomicon25
Member
Offline
Activity: 460
Merit: 12
|
|
October 30, 2017, 06:07:51 PM |
|
All blocks have 50 YTN reward, where are you seeing a difference?
|
|
|
|
JC1DA
|
|
October 30, 2017, 06:17:55 PM |
|
Network hash is at 155KH/s already.
|
|
|
|
JC1DA
|
|
October 30, 2017, 06:24:22 PM |
|
the small amount is a fee for a transaction.
|
|
|
|
oldcoinguru
|
|
October 30, 2017, 06:27:48 PM |
|
According to the dev GPU mining is slower than CPU so it might not even worth creating a GPU miner for this algorithm. I can't verify if this is true, though, since the dev hasn't provided many details.
I never said it was faster. Just pointing out that there really isn't anything new with this algo than a couple lines of code. Transaction fee. There was an 800 coin transaction included in that block. That's why the solved block received 50.0002
|
|
|
|
dominguero
|
|
October 30, 2017, 06:59:32 PM |
|
This is an important fact. I haven't any cryptographic skill, but I suppose that the dev use more memory than the usual yescrypt algo. For sure this enhanced the ACSIS resistant. But the question is how this modification affect a GPU/CPU mining... remember that more memory requirements it's not always better for CPU mining... AEON 4 times better in CPU mining than Monero, but only 2 times with a GPU, and AEON have the half memory requirements than Monero. And if anyone could calculate the L3cache needed for each mining thread, we could optimize a lot the CPU mining.
|
|
|
|
Qraq
Member
Offline
Activity: 108
Merit: 10
|
|
October 30, 2017, 07:03:28 PM |
|
Please help me: I tried to mine solo but miner answers: HTTP request failed: Failed to connect to localhost port 9982: Connection refused json_rpc_call failed, retry after 30 seconds May be I need to run something else, not only yenten-qt.exe and miner.exe (with commands)?
|
|
|
|
cryptonomicon25
Member
Offline
Activity: 460
Merit: 12
|
|
October 30, 2017, 07:09:43 PM |
|
This is an important fact. I haven't any cryptographic skill, but I suppose that the dev use more memory than the usual yescrypt algo. For sure this enhanced the ACSIS resistant. But the question is how this modification affect a GPU/CPU mining... remember that more memory requirements it's not always better for CPU mining... AEON 4 times better in CPU mining than Monero, but only 2 times with a GPU, and AEON have the half memory requirements than Monero. And if anyone could calculate the L3cache needed for each mining thread, we could optimize a lot the CPU mining. This algo is not using much memory for me, only 4% of the total. I don't think it uses the L3 cache the same way that cryptonight does because I get the best hashrate running all 4 threads even though I only have 3MB L3 cache. With cryptonight I get the best hashrates only running 1 thread.
|
|
|
|
dominguero
|
|
October 30, 2017, 07:18:45 PM |
|
This is an important fact. I haven't any cryptographic skill, but I suppose that the dev use more memory than the usual yescrypt algo. For sure this enhanced the ACSIS resistant. But the question is how this modification affect a GPU/CPU mining... remember that more memory requirements it's not always better for CPU mining... AEON 4 times better in CPU mining than Monero, but only 2 times with a GPU, and AEON have the half memory requirements than Monero. And if anyone could calculate the L3cache needed for each mining thread, we could optimize a lot the CPU mining. This algo is not using much memory for me, only 4% of the total. I don't think it uses the L3 cache the same way that cryptonight does because I get the best hashrate running all 4 threads even though I only have 3MB L3 cache. With cryptonight I get the best hashrates only running 1 thread. Yes, its true, and I get more constant and little better hashrate if i don't use any virtual core with a Ryzen, only physical ones.
|
|
|
|
Vita1ico
|
|
October 30, 2017, 07:23:47 PM |
|
The meaning of this coin? You need a masternode. Then it will be interesting to buy.
|
|
|
|
pochy123
Jr. Member
Offline
Activity: 198
Merit: 1
|
|
October 30, 2017, 07:32:50 PM |
|
Please help me: I tried to mine solo but miner answers: HTTP request failed: Failed to connect to localhost port 9982: Connection refused json_rpc_call failed, retry after 30 seconds May be I need to run something else, not only yenten-qt.exe and miner.exe (with commands)? must execute the demond ,,, andentend ,, wait for k syncronyce and then run the miner
|
|
|
|
Qraq
Member
Offline
Activity: 108
Merit: 10
|
|
October 30, 2017, 07:55:05 PM |
|
Please help me: I tried to mine solo but miner answers: HTTP request failed: Failed to connect to localhost port 9982: Connection refused json_rpc_call failed, retry after 30 seconds May be I need to run something else, not only yenten-qt.exe and miner.exe (with commands)? must execute the demond ,,, andentend ,, wait for k syncronyce and then run the miner Hm, does the wallet must be loaded before or after daemon execution?
|
|
|
|
pochy123
Jr. Member
Offline
Activity: 198
Merit: 1
|
|
October 30, 2017, 08:38:30 PM |
|
Please help me: I tried to mine solo but miner answers: HTTP request failed: Failed to connect to localhost port 9982: Connection refused json_rpc_call failed, retry after 30 seconds May be I need to run something else, not only yenten-qt.exe and miner.exe (with commands)? must execute the demond ,,, andentend ,, wait for k syncronyce and then run the miner Hm, does the wallet must be loaded before or after daemon execution? run the demond wait the syncronyzacio, then simple wallet and create direction, and then create your executable file (yenten.bat) and run it ..
|
|
|
|
|