[ANN] PURE - Decentralized - Masternodes - PoS

[WindForce]

Average is more or less 18 pure daily. I run 3 masternodes and that's the average return over time.
It's a great coin, with a solid community and very helpful and active dev. team

[template]

with my stake get 42 PURE daily

[sunny747007]

Yep.Staking also gives good reward as network stake is low.If some users dont know to setup masternode properly ,they can see video and text guide and run masternode else they can stake too and get great reward.We have set stake higher so that both masternodes and stakers get good Roi

[WindForce]

with my stake get 42 PURE daily

How many coins are you staking?

[template]

with my stake get 42 PURE daily

How many coins are you staking?

30000

[WindForce]

This is PURE joy :-) Go Pure gooooo

[WindForce]

with my stake get 42 PURE daily

How many coins are you staking?

30000

You should build some masternodes then...You will get way more rewards

[zasmal]

Hi,

I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)

When typing this into the Putty Command Promt:

"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"

 it asks me:

"The following NEW packages will be installed:
  autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
  g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
  libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
  libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
  libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
  libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"

I type in "y" but then it says "Abort."

I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/

[theboccet]

Hi,

I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)

When typing this into the Putty Command Promt:

"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"

 it asks me:

"The following NEW packages will be installed:
  autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
  g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
  libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
  libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
  libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
  libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"

I type in "y" but then it says "Abort."

I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/

Hello
try to remove the "-y" at the end of the command line

[zasmal]

Hi,

I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)

When typing this into the Putty Command Promt:

"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"

 it asks me:

"The following NEW packages will be installed:
  autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
  g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
  libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
  libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
  libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
  libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"

I type in "y" but then it says "Abort."

I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/

Hello
try to remove the "-y" at the end of the command line

Still doesn't work and says "Abort."

Edit: How do I contact the devs to help me get this masternode up and running? Their Slacked group invite doesnt work

[changesl]

YES!  Price pumping !

Next Q1, go to moon while more exchange listed.

[changesl]

Join our Slack,  people will help you.

Hi,

I am trying to follow the video to set-up my PURE masternode (https://www.youtube.com/watch?v=egr38Nq7nsc)

When typing this into the Putty Command Promt:

"sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev
bsdmainutils software-properties- common -y"

 it asks me:

"The following NEW packages will be installed:
  autoconf automake autotools-dev build-essential cpp cpp-5 dpkg-dev fakeroot
  g++ g++-5 gcc gcc-5 libalgorithm-diff-perl libalgorithm-diff-xs-perl
  libalgorithm-merge-perl libasan2 libatomic1 libcc1-0 libcilkrts5
  libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libisl15
  libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev
  libtool libtsan0 libubsan0 pkg-config
0 upgraded, 35 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 113 MB of additional disk space will be used.
Do you want to continue? [Y/n]"

I type in "y" but then it says "Abort."

I dont know what to do. Can anyone help? Or is there a different way to get the masternode up and running? I found this guide but don't know whether it would work: https://masternodeguides.com/setup-pure-masternode-pure-masternodes/

Hello
try to remove the "-y" at the end of the command line

Still doesn't work and says "Abort."

Edit: How do I contact the devs to help me get this masternode up and running? Their Slacked group invite doesnt work

[Mr_Marbles]

Remove space from software-properties- common, should be software-properties-common

https://join.slack.com/t/purealt/shared_invite/enQtMjg4MzIzMjk0OTEyLTk2MTY4ZWMzZWYxMDc0YjM0M2NkZGIzNjU4OWRjMWU0MGRmNWExNmQxMzNhZDc0ZTU1ZDFlOWE5ODMxNzYxZmM


PURE: PT8a2bMoEkGnHJw8PLB7mreZiBoxfHFr9g

[theboccet]

Remove space from software-properties- common, should be software-properties-common

https://join.slack.com/t/purealt/shared_invite/enQtMjg4MzIzMjk0OTEyLTk2MTY4ZWMzZWYxMDc0YjM0M2NkZGIzNjU4OWRjMWU0MGRmNWExNmQxMzNhZDc0ZTU1ZDFlOWE5ODMxNzYxZmM


PURE: PT8a2bMoEkGnHJw8PLB7mreZiBoxfHFr9g

fine !!!! must look like this
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils software-properties-common -y

thank you

[Lock$mith]

Any more details on PureDex coming? Sounds awesome

[WindForce]

Any more details on PureDex coming? Sounds awesome

Leave something for next year!

[Lock$mith]

Any more details on PureDex coming? Sounds awesome

Leave something for next year!

I know I know, I'm an eager beaver

[template]

Wow today get 112 reward   amazing  

[template]

$5+ is good for feb 2018

[Lock$mith]

Wow today get 112 reward   amazing  

For one masternode?!   Is that over 24 hours?