chrysophylax
Legendary
 Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
 |
July 13, 2017, 01:56:19 AM |
|
Had an issue I cannot figure out how to resolve. Running 3.0 with a 750ti mining rig. I did the thing listed here to remove the ccminer_all and point it at ccminer to support the older cards. Works great for most coins except for two.
If I try to mine Monero or Decred I get an error when I start miners that the power limit of 150W is too high. (I agree 150w is way too high an upper limit for 750ti cards.)
Can I change this in the .conf files? Or do I have to go elsewhere? I think the error message said it expects something between 30-50w or something in that range.
I spent a lot of time searching these forums but I am not able to figure out how to change this. Thanks in advance.
Quixote
PS all the various miners listed in the tips that point to mbl.cash domains have died it seems. Anyone know an alternate host site? Was just trying to get my rig setup to be able to mine a handful of altcoins I think could maybe have legs so I can build up a small stake of each.
depends on what miner this 'older' miner is ... decred and monero were not algos supported in the earlier versions of ccminer ... 750ti cards averaged 40W - so trying to push 150W is fruitless ... #crysx |
|
|
|
|
|
|
|
|
|
|
|
|
No Gods or Kings. Only Bitcoin
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
Quixote_55
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 13, 2017, 07:03:00 PM |
|
Sorry maybe I asked in unclear way, let me try again. Its ccminer on kopiemtu 3.0. Whatever version comes with that.
I just need to tell it to set the lower powerlimit of 35-40w instead of what seems to be defaulting to 150w in the miner. Is there any way to change that limit lower when I launch ccminer was my question so that it won't just fail to even start the mining process. Or if ccminer will not support mining those coins on a 750ti rig then so be it.
So ccminer defaults are trying to set power limit of 150w, I want to find out how to change that and set a lower limit for this rig since the cards are nowhere near that power usage and there is some safeguard that only allows the 30-50w range for those cards.
|
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
|
July 14, 2017, 08:09:24 AM |
|
Sorry maybe I asked in unclear way, let me try again. Its ccminer on kopiemtu 3.0. Whatever version comes with that.
I just need to tell it to set the lower powerlimit of 35-40w instead of what seems to be defaulting to 150w in the miner. Is there any way to change that limit lower when I launch ccminer was my question so that it won't just fail to even start the mining process. Or if ccminer will not support mining those coins on a 750ti rig then so be it.
So ccminer defaults are trying to set power limit of 150w, I want to find out how to change that and set a lower limit for this rig since the cards are nowhere near that power usage and there is some safeguard that only allows the 30-50w range for those cards.
the nvidia-smi does that - but wont work on the 750ti ( only higher end cards ) ... ccminer WILL set parameters ( ccminer-tpruvot that is ) such as -plimit 50 ( for a power limit of 50w ) BUT only if the nvidia drivers allow such commands ... and again - i think with the 750ti doesnt ... we use to have 52 of these cards - and none of them could be manipulated that way via command line ... i have no idea whether the ccminer that is in kopiemtu is actually ccminer-tpruvot - or the others ( ccminer-klaust - ccminer-spmod - ccminer-alexis78 - etc ) ... if you can compile the one you want - you can just rename it to the 'default' kopiemtu miner name ( ccminer in this case i guess ) - and see if it will work with it ... #crysx |
|
|
|
arsen_a
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 28, 2017, 12:38:26 PM |
|
Hello!
Can anybody help me to download KopiemTu 3.0 image file?
Thanks in advance.
|
|
|
|
|
|
senne
|
|
July 31, 2017, 02:12:40 PM |
|
download link is down, please post new link!
|
|
|
|
|
|
senne
|
|
August 02, 2017, 06:03:03 PM |
|
any option to copy the .img to a ssd drive instead of usb stick??
|
|
|
|
|
arsen_a
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 03, 2017, 12:53:06 PM |
|
any option to copy the .img to a ssd drive instead of usb stick??
Hi senne, Have you downloaded the image file, so you want to copy it to a ssd drive? |
|
|
|
|
|
senne
|
|
August 03, 2017, 04:13:14 PM |
|
allready found this option..
Only problem now is i want to install ewbf, the download link is down.
I have it in /opt/miners and changed mienr.sh, but still expierience problems..
|
|
|
|
|
|
hashbrown9000
|
|
October 16, 2017, 02:31:09 AM |
|
does anyone here have a link to the miner? the one on the first post is not working  |
Pinkcoin:
ETH:
VTC:
BTC:
|
|
|
shashilx
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 16, 2017, 08:34:02 AM |
|
does anyone here have a link to the miner? the one on the first post is not working asked the same question few times, no one provided. i even ready to host it on my site but still no one provide me link (even in private message). so question is still - provide me link and then I will provide link to 4gb file on my own server with 100mbit internet connetion. |
|
|
|
|
|
|
shashilx
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 22, 2017, 10:00:01 AM |
|
wow thanks for the link and as promised I've hosted file on my own server, this is the link http://shashilx.com/kopiemtu-3.0.zipfile was verified with md5 - the sum is equal the one in main post so I think it's clean image but you can (or must) by yourself. |
|
|
|
|
shashilx
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 22, 2017, 11:44:09 AM |
|
might be but all peers dead )) tried to rehash torrent but no luck |
|
|
|
|
shashilx
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 22, 2017, 09:36:51 PM |
|
as you can see i'm already downed it and hosted on my own server |
|
|
|
|
|
hashbrown9000
|
|
October 23, 2017, 06:43:11 PM |
|
It's a shame that this iso is abandonware, as the functionality for starting and stopping mining plus switching algos and coins was so simple.
|
Pinkcoin:
ETH:
VTC:
BTC:
|
|
|
|
induktor
|
|
October 23, 2017, 07:34:18 PM |
|
I am maintaining the Kopiemtu 2.0, and working on a new version based on lubuntu 17 (will switch to 18 LTS when available in may 2018) but depends on what JK_14 says, it's his baby  most of the issues are library related and GCC 6 which most miners dont't like my version will not be as nice on the web page, as the Kopiemtu 3.0, but it will have the same functionality (well, no master-slave commands but other than that....) including GUI administration via VNC / RDP. I'm working on it right now. Indkt. |
BTC addr: 1vTGnFgaM2WJjswwmbj6N2AQBWcHfimSc
|
|
|
elamast
Newbie
Offline
Activity: 5
Merit: 0
|
|
October 31, 2017, 01:09:22 AM |
|
Just to keep it from disappearing again...
magnet:?xt=urn:btih:10640efab7a4a1ad30313c1c6d957a186066ce7b&dn=kopiemtu-3.0.zip&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.zer0day.to%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.[Suspicious link removed]%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969&tr=udp%3A%2F%2Fexplodie.org%3A6969
|
|
|
|
|
|
