Hiveon. №1 OS for mining

[Hiveon]

Hive OS Linux client v0.6-219@221005

📢 What's new?

MINERS 👷‍♂️
⛏️ lolMiner v1.60
* Significantly improved performance on Flux for Nvidia Turing & Ampere and AMD RX 5000 based GPUs.
* Equihash 125/4 (Flux), 144/5 and 192/7 stratum can now distinguish between stale shares and other rejected.
📝Notes: Full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases
⛏️ SRBMiner-Multi v1.1.0
* Performance increase on sha512_256d_radiant algorithm for GPUs.
* Small performance increase on sha512_256d_radiant algorithm in DUAL mining modes: ethash/etchash/autolykos2.
📝Notes: Full changelog at https://github.com/doktor83/SRBMiner-Multi/releases
⛏️ Custom miner: Package management improvements.
* Fixed downgrade issue: miner was not installed if archive was already downloaded.
* Added check for broken archives.


⚡️ Stable Image 0.6-219@220928 💿

🔑 Key features
* Hive Linux client: v0.6-219
* Ubuntu v18.04.6 LTS based
* Linux kernel: v5.10.110
* Nvidia driver: v510.73.05
* AMD driver/OpenCL: v5.13.0822/v21.40.1


🆚 Changelog vs previous Stable Image release
* updated Nvidia to v510.73.05 (latest production driver on which LHR protection can be removed)
* updated amdgpu Linux kernel module to v5.13.0822 (fixed some firmware issues on Navi22/23 ASICs, added support Tjunc sensor for Polaris GPUs)
* integrated latest Hive OS Linux client


This Image is recommended for Nvidia Pascal/Turing/Ampere and AMD Polaris/Vega/Navi/Big Navi

💾 Available for download as a torrent or XZ archive in the "GPU" section/Stable version: https://hiveon.com/install/ and flashed with Rufus/balenaEtcher or it can be live replaced with the hive-replace tool via shell [hive-replace -y --stable]

[1714225014]

1714225014

[1714225014]

1714225014

[1714225014]

1714225014

[1714225014]

1714225014

[Hiveon]

Hive OS Linux client v0.6-219@221008

📢 What's new?

MINERS 👷‍♂️
⛏️ TeamRedMiner v0.10.4.1
* Fixed Kaspa kernels for BC-160 (gfx1011) and Radeon VII family on older PAL drivers.
* Fixed rare cases of ethash false alerts of dead GPUSs.
⛏️ WildRig-Multi v0.33.1
* Slightly improved sha512256d on AMD GPUs.
* Implemented pufferfish2 algo.
⛏️ miniZ v1.9z3
* Improved invalid/stale shares on progpow/ethash/octopus.
* Fixed issues with KawPow mining.
* Fixed AMD fan display.
* Improved stability.
⛏️ NoncerPro Nimiq CUDA miner v3.4.0
* Added support RTX 30xx.

[Hiveon]

Hive OS Linux client v0.6-219@221009

📢 What's new?

MINERS 👷‍♂️
⛏️ TeamBlackMiner v1.70
* Implemented support for kawpow algo.
* Restored Zil Single mining.
* New dual mining mode ethash+zil and etchash+zil.
* Fixed poolspeed in the console for static diff pools for Vertcoin.

[Hiveon]

Hive OS Linux client v0.6-219@221012

📢 What's new?

MINERS 👷‍♂️
⛏️ lolMiner v1.61
* Slightly improved performance of Flux mining on Nvidia Ampere and Turing cards. approx 1.5-2.5% vs v1.60
* Fixed a bug causing Flux mining on Nvidia Pascal GPUs not working.
Notes: Full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.61
⛏️ GMiner v3.08
* Added kheavyhash algorithm for mining Kaspa on Nvidia GPUs.
⛏️ BzMiner v12.0.2
* Added support for mining ETHW. fee 0.5%
* Added support for mining NEOX, MEWC. fee 0.5%
* Added support for mining RXD. fee 1.0%
* Added support for new dual mining modes.
Notes: Full changelog at https://github.com/bzminer/bzminer/releases/tag/v12.0.2
⛏️ 🆕 Dero-Stratum-Miner v1.0.3
* CPU miner for mining DERO on Whalesburg pool via their stratum implementation

[Hiveon]

Hive OS Linux client v0.6-219@221016

📢 What's new?

MINERS 👷‍♂️
⛏️ GMiner v3.09
* Added ETC+KASPA, ETHW+KASPA, ERGO+KASPA dual solver for Nvidia GPUs.
* Improved KASPA mining performance on GTX 10x0 GPUs.
📝 Notes: Full changelog at https://github.com/develsoftware/GMinerRelease/releases/tag/3.09
⛏️ T-Rex v0.26.8
* Added support for Nvidia RTX 40xx GPUs.
* Handle v520+ drivers correctly.
📝 Notes: Full changelog at https://github.com/trexminer/T-Rex/releases/tag/0.26.8
⛏️ WildRig-Multi v0.33.3
* ghostrider fix for Nvidia GPUs.
* Improved pufferfish2 on RDNA2 GPUs up to 20%.
* Added default intensity values for RTX 4090.
* Reverted curvehash changes for Nvidia (should be same as v0.32.2).
📝 Notes: Full changelog at https://github.com/andru-kun/wildrig-multi/releases/tag/0.33.3

[Hiveon]

Hive OS Linux client v0.6-219@221020

📢 What's new?

MINERS 👷‍♂️
⛏️ TeamRedMiner v0.10.5.1
* Fixed Kaspa mining critical bug: sometimes delaying shares, resulting in pool rejects.
* Fixed Kaspa solo mining against the Kaspa stratum bridge or other setups with no extranonce sent.
📝Notes: Full changelog at https://github.com/todxx/teamredminer/releases/tag/v0.10.5.1
⛏️ GMiner v3.10
* Added Nvidia RTX 40xx GPUs support.
* Added Aeternity support mining on Nvidia GPUs.
* Improved Ergo compatibility with mining pools.
📝Notes: Full changelog at https://github.com/develsoftware/GMinerRelease/releases/tag/3.10

[Hiveon]

Hive OS Linux client v0.6-219@221023

📢 What's new?

MINERS 👷‍♂️
⛏️ miniZ v1.9z4
* Performance improvements for 125,4 on all GPUs, up to 20%.
* Performance improvements for 150,5 on all GPUs.
* Added ubqhashalgorithm for UBQ/Ubiq mining.
* Added AMD support for all progpow algos.
* Added support for Nvidia RTX 40xx GPUs.
📝Notes: Full changelog at https://miniz.ch/2022/10/22/miniz-v19z4-is-out
⛏️ Noncerpro Nimiq CUDA miner v3.4.1
* A more robust parameters optimizer.
* Fixed 100% CPU usage on some GPUs.
* Reduced the default memory allocation which could decrease the number of rejected shares.
📝Notes: Full changelog at https://github.com/NoncerPro/noncerpro-nimiq-cuda/releases/tag/v3.4.1
⛏️ XMRig v6.18.1
* Small optimization & fixes.
📝Notes: Full changelog at  https://github.com/xmrig/xmrig/releases/tag/v6.18.1
⛏️ CPUminer-Opt-JayDDee v3.20.3
* Faster c11, anime, hmq1725 algos depending on CPU.
📝Notes: Full changelog at  https://github.com/JayDDee/cpuminer-opt/releases/tag/v3.20.3
 ⚙️  Misc fixes
* Fixed Gminer config generator.
* Fixed VertHashMiner stats issue.

[Hiveon]

Hive OS Linux client v0.6-219@221025

📢 What's new?

MINERS 👷‍♂️
⛏️ GMiner v3.11
* Fixed miner restarts on Ergo + Kaspa.
📝Notes: Full changelog at  https://github.com/develsoftware/GMinerRelease/releases/tag/v3.11
⛏️ NanoMiner v3.7.4
* Removed LHR unlocker for new Nvidia drivers.
📝Notes: Full changelog at https://github.com/nanopool/nanominer/releases/tag/v3.7.4
⛏️ XMRig-MO v6.18.1-mo1
* Synced with XMRig v6.18.1.
📝Notes: Full changelog at https://github.com/MoneroOcean/xmrig/releases/tag/v6.18.1-mo1

[Hiveon]

Hive OS Linux client v0.6-219@221027

📢 What's new?

MINERS 👷‍♂️
⛏️ WildRig-Multi v0.33.4
* Implemented evrprogpow for mining EVR/Evrmore.
📝 Notes: Full changelog at https://github.com/andru-kun/wildrig-multi/releases/tag/0.33.4
⛏️ TeamBlackMiner v1.72
* Faster kawpow on Nvidia cards.
* Fixed a rare crash in ETH+ZIL dual mining.
📝 Notes: Full changelog at https://github.com/sp-hash/TeamBlackMiner/releases/tag/v1.72

[jessicaelliott9090]

In order to ensure that the wavlink extender setup process goes smoothly, you have to make sure that you are using a secure and strong internet connection. You should also take note of the web address wifi.wavlink.com​ that you will need to be able to complete your setup. To begin, you need to access the Wavlink router login page to tweak some settings. Now let’s take a look at the steps you will need to take to login into the Wavlink router.

[Hiveon]

Hive OS v0.6-220@221221  
What's new?

SYSTEM  
* Nvidia GPUs support changes
  * Updated nvtool to v1.7.8.
     - Added support for Locked Core Clock for Pascal GPUs.
     - Added support for Locked Memory Clock for Pascal and newer GPUs.
Notes: If memory overclocking doesn't affect hashrate i.e. mining Kaspa then user can set MemClk offset as '-3000 MHz', as result memory clock will actually set to 810MHz with a significant reduction in energy consumption.  Experimental usage until dashboard is updated.
     - Implemented Nvidia CMP idle mode.
  * Updated NVFlash to v5.792.0.
  * Updated nvidia-info.
  * Updated nvidia-driver-update (Notes: Added support up to CUDA v11.8 and latest drivers)
* AMD GPUs support changes
  * Added new 0 mem state feature.
Notes: If memory overclocking doesn't affect hashrate i.e. mining Kaspa then user can set MemClk to '1 MHz', as result memory clock will drop to 0 memory state, e.g. for BigNavi it's equal to 96MHz with a significant reduction in energy consumption.  Experimental usage until dashboard is updated.
  * Add new experimental command amd-ocl-install.
Notes: User can now change pre-installed OpenCL libraries to available versions of amdgpu and rocm from Hive OS repository.
* Improved first run procedure
   - Improved password input checking.
   - Improved rig password setting sequence.
   - Reversed disk-expand behavior on first boot, now runs if rig.conf doesn't exists.
* Updated autofan to v3.18.
* Updated Web shell (ttyd v1.7.2).
* Built-in-CPU graphics now always the first in GPUs list.
* Update Devices IDs.
* Various other fixes.

[Hiveon]

Hive OS Linux client v0.6-220@221223
📢 What's new?

MINERS 👷‍♂️
⛏️ lolMiner v1.65a
* Fixed a bug causing sometimes high number of duplicate shares on Kaspa when dual mining with ETC;
* Changed Kaspa stratum behavior: Kaspa mining will now start only after the pool did send an authorization message, this prevents rejected shares at startup; Slightly changed dual mining tuning behavior to a mode a bit slower, but less likely to hang up the GPUs at startup;
📝Notes: see full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.65a
⛏️ GMiner v3.19
* Improved DUAL mining: ETC+KASPA, Ergo+KASPA;
* Improved Ergomining hashrate in single mining mode for 10xx and 20xx Nvidia GPUs;
📝Notes: see full changelog at https://github.com/develsoftware/GMinerRelease/releases/tag/3.19
⛏️ TeamRedMiner v0.10.7
* Added dual ERG+KASmining support for all supported GPUs;
* Fixed semi-broken dual zil mining for older algos, e.g. Nimiq, Argon2, x16r, and others;
📝Notes: see full changelog at https://github.com/todxx/teamredminer/releases/tag/v0.10.7


Hive OS Linux client v0.6-220@221222
📢 What's new?

MINERS 👷‍♂️
⛏️ lolMiner v1.65
▫️ Improved Kaspa performance in ETC/ETHW dual mining by about 6-7%.
on AMD (Big) Navi GPUs and 10-12% on Nvidia Turing and Ampere, measured at the same Ethash speed. The actual improvement depends on the concretely selected dual factor.
▫️ Improved Kaspa performance in Kaspa only mining mode by 0.6 to 1.2%.
on Nvidia GPUs and 0.4-0.5% on AMD (Big) Navi GPUs at approximately same power draw
▫️ Fixed some minor display bugs.
📝Notes: Full changelog at https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.65
⛏️ miniZ v2.0b
▫️ Fixed issues with invalid shares.
📝Notes: Full changelog at https://miniz.ch/2022/12/22/miniz-v20b-is-out/
⛏️ Dero-Stratum-Miner v1.0.5
▫️ Small fixes.
📝Notes: Full changelog at https://github.com/whalesburg/dero-stratum-miner/releases/tag/v1.0.5
⛏️ CPUminer-Opt-JayDDee v3.21.0
▫️ Added minotaurx algo for stratum only.
▫️Prehash optimised blake256 & sha256 to ignore zero-padded data for AVX2 & AVX512.
▫️Other small improvements.
📝Notes: Full changelog at https://github.com/JayDDee/cpuminer-opt/releases/tag/v3.21.0

[rotepfau]

Hi there!

After ethereum merge, the most profitable coin it's not so obviously as are three months ago. To comply that I developed a simple python script to check it using third party monitors and then set flight sheet on Hiveon respectively.

check on:
https://bitcointalk.org/index.php?topic=5433038.0

I would love to see something like that native implemented on Hiveos, perharps I could collaborate with something. I'm junior dev and, until now, programming for hobby.

Thanks in advance

[sp_]

I think that in hard times like this you should probably sell your gear or wait for the next profitable coin.

[smilodon]

Hi there!

After ethereum merge, the most profitable coin it's not so obviously as are three months ago. To comply that I developed a simple python script to check it using third party monitors and then set flight sheet on Hiveon respectively.

check on:
https://bitcointalk.org/index.php?topic=5433038.0

I would love to see something like that native implemented on Hiveos, perharps I could collaborate with something. I'm junior dev and, until now, programming for hobby.

Thanks in advance

I have made a linux operating system for amd cards with automatic change to the most profitable currency ethash, etchash, ubqhash in zerpool. precisely because a few minds have made such applications, the profitability is approximately similar to the most popular currencies. only those with high speed win at the expense of the rest unfortunately...

[chrysophylax]

Hi there!

After ethereum merge, the most profitable coin it's not so obviously as are three months ago. To comply that I developed a simple python script to check it using third party monitors and then set flight sheet on Hiveon respectively.

check on:
https://bitcointalk.org/index.php?topic=5433038.0

I would love to see something like that native implemented on Hiveos, perharps I could collaborate with something. I'm junior dev and, until now, programming for hobby.

Thanks in advance

I have made a linux operating system for amd cards with automatic change to the most profitable currency ethash, etchash, ubqhash in zerpool. precisely because a few minds have made such applications, the profitability is approximately similar to the most popular currencies. only those with high speed win at the expense of the rest unfortunately...

Where? ...

#crysx #cwi

[FP91G]

Hive OS Linux client 0.6-221@230321
2023-03-21
https://hiveon.com/changelog

BzMiner v14.0.2 (Improved nexapowhashrate; Added nexa support for AMD "Polaris" RX 400/500 GPUs; Added support mining ironfish; dded dual modes: etc + ironfishand ethw + ironfish; A lot of bugs fixed, see full changelog at https://github.com/bzminer/bzminer/releases/tag/v14.0.2)

GMiner v3.30 (Add support octopusalgorithm for mining Conflux on Nvidia GPUs; Add dual mode Conflux+Kaspaand tripple with Zilliqa; Added support Nicehash mining for Conflux; See full changelog at https://github.com/develsoftware/GMinerRelease/releases/tag/3.30)

SRBMiner-Multi v2.2.3 (Improved mining performance on algorithm dynexfor AMD/NVIDIA; Added support for gfx900 on ROCm drivers for algorithm dynex; Minor bug fixes; Full changelog & release notes: https://github.com/doktor83/SRBMiner-Multi/releases/tag/2.2.3)

CPUminer-Opt-JayDDee v3.22.0 (Faster netdiff calculation; Full changelog: https://github.com/JayDDee/cpuminer-opt/releases/tag/v3.22.0)

Rigel miner: fix stats issue when not all GPUs used by miner

https://hiveon.com/changelog/?type=All&page=1

[FP91G]

Fewer video cards, bigger savings

From March 11, 2024, mining rates for farms with GPUs of less than 6 cards will decrease proportionally and range from $3 to $0.50.

CPU mining costs $0 on GPU rigs, standalone is $0.50.

New free level: 2 rigs, no coin/pool limits.
https://hiveon.com/pricing/
https://t.me/journalmainera/3008

2 rigs for free...then you have to pay!
- rig without cards and only with a processor: $0.5 per month
- 1 card + cpu: 0.5 $ per month
- 2 cards + cpu: 1 $ per month
- 3 cards + cpu: 1.5 $ per month
- 4 cards + cpu: 2 $ per month
- 5 cards + cpu: 2.5 $ per month
- 6 cards and above + cpu: $3 per month
https://t.me/koliamainer/10407

[FP91G]

7 cool commands for HiveOS

1. nvidia-smi dmon -s et -d 10 -o DT
Usage: Shows whether risers are generating errors. Good risers and cables have a 0 in the PCI Errors column

2. intel-info
Usage: Shows status/information about your Intel dGPU processors.

3. nvtool -h
Usage: Shows all nvtool command parameters (throttle, etc.).

4.amd-info
Usage: Shows the status/information of your AMD devices.

5 nvidia-info
Usage: Shows the status/information of your Nvidia devices.

6. nvidia-driver-update
Usage: Updates Nvidia drivers.

7. Keyboard shortcuts as a bonus:
Ctrl+C
This combination stops any running command.

Ctrl A+D
Use this command to exit the screen (miner or agent). The screen will continue to work.

Ctrl A+A
Using this combination you can switch between screens if you have a second few miners running.

https://t.me/koliamainer/10569

[FP91G]

*What Happened?**
On 2024-04-11 23:59 CET, our systems encountered an unexpected error, affecting the integrity of workers data. This incident was quickly identified and our engineering team immediately initiated a comprehensive investigation to understand the scope and remediate the impact.

**What Information Was Affected?**
The incident specifically impacted all data related to “workers”, including:

* Workers with all related information
* Tags
* Overclocking Profiles
It’s important to note that part of this data can be restored, while unfortunately, some portions may be permanently lost.

**What Are We Doing?**
We have initiated a data restoration process. For devices online within the next 3 hours, we anticipate partial data recovery. The remaining devices will undergo restoration processes within the next 8 hours.
Despite our best efforts, we regret to inform you that a portion of the data, particularly some details regarding offline workers and specific overclocking profiles, may not be recoverable. Our team is currently assessing the extent of this loss and will provide specific details as soon as possible.

**What Can You Do?**
Please ensure that your devices remain online for the next 3 hours to facilitate the restoration process.

**Next Steps**
We are fully committed to regaining your trust and are taking concrete steps to enhance our system’s data integrity. An in-depth investigation is underway, and we pledge to keep you informed with regular updates. Additionally, we will be reviewing our policies and procedures to prevent such incidents in the future.

We sincerely apologize for any inconvenience or disruption this may have caused. Our team is working diligently to resolve this issue swiftly and ensure the security and reliability of your data.
https://twitter.com/hiveonofficial/status/1778261787382575348

Check your rigs!
My video card settings have been reset. Video card consumption has increased