Hiveon. №1 OS for mining

[sudhsrx]

Hi

I would like to write my test observation hiveos with Asus b250.

First, I hope to have hiveos on my b250 mining expert board. But until stable run, I need to use Windows.

8 Nvidia + 2 amd works stable.
8 Nvidia + 6 amd very unstable. At least 2 and cards randomly very low hash rate such as 4mhs.

If I increase and cards more than two, randomly low has rate on some amd cards start. Once time I had a stable 8 + 4 combination. But when I deal with autofan function rig restarted and again 2 amd cards start with low hash rates. When I unplug slot and plug some other slot it starts good until another booth. Before each new booth you need to change slot position of low performance and cards.

As I said, I like to have hiveos.  I hope developers will come with a solution.

What is my next step for this mother board.

I will flash original bios on to amd cards. Let's see with original bios result.

Any body has experience with original bios on Asus b250? Do you think that it would be helpful?

If I will have no good result, I will try ethos. I want to use any is other than Windows.

Best regards
 

I am running 14 cards on this board on multiple rigs very stable. This is what I do: update the board bios to 1206.(there is a new 1207 version but I did not play with it just yet) Do not mix cards, either have nvidia or amd and flash there respective image on ssd. If you go nvidia update the driver "nvidia-driver-update" in hiveos and update to the latest version hive. If you go amd flash the vega image and do not update hive stay on version 6.01. If you want to use amdmemtweak you will need to compile it yourself from command line:
git clone https://github.com/Eliovp/amdmemorytweak
 cd amdmemorytweak/linux
 sudo apt-get install build-essential -y
 sudo apt-get update -y
 sudo apt-get install libpci-dev -y
 g++ AmdMemTweak.cpp -lpci -lresolv -o amdmemtweak
 rm /hive/sbin/amdmemtweak
 mv /home/user/amdmemorytweak/linux/amdmemtweak /hive/sbin/

The only cards I did not manage to run on a 14 card rig are the 1660/1660ti which is at 8 with the current nvidia drivers. As the nvidia drivers progressed I was able to go from 3 cards originally to 8 now.

I hope this helps, it is sure working for me, 15 rigs running and 30 more motherboards left on the shelf  (no video cards an power to fill them up)

ok..as explained I was able to install amdmemtweak..but how do I run it on boot? Browser based GUI takes in only one para. (i.e REF)..well in windows I had a bat file that use to run automatically on every booth..how do I experiment the same on hive?

[1714946848]

1714946848

[1714946848]

1714946848

[1714946848]

1714946848

[1714946848]

1714946848

[dimafern]

WEB INTERFACE UPDATE July 20, 2019

Major changes in this update:

• New miner - NoncerPro OpenCL / CUDA
• Improved Schedules
• Changed the “Disable GUI on boot” switch
• Optimized GPU Hub for big farms
• New option in the “Add Wallet” form
• Various bug fixes

Detailed changelog here

[dimafern]

0.6-58@190720
What's new?
*   CPUminer-opt v3.9.6.1 (added new algos: x21s, hex)
*   Bminer v15.7.2 (related to cuckaroo29d: improved the stability, reduced the CPU usage, added 5G solver)
*   Gminer v1.52 (improved performance for EQ 144/5 and 192/7 on RTX cards)
*   PhoenixMiner v4.5b (improved stability of Nvidia kernels, added support latest AMD drivers up to v19.30, added advanced hardware monitoring, increased the maximum supported DAG epoch to 450, fixed the devfee pools for some of the alternative coins)
*   XMRig v2.16.0-beta (added support RandomWOW, please select version in FS/miner config)
*   NEW XMRig-SChernykh v2.15.4-beta2 (as xmrig fork schernykh, for RandomWOW algo)
*   Claymore's Dual ETH Miner - fixed DAG loading on 4G card for ETC/ETH when GUI enabled

[dimafern]

0.6-58@190721
What's new?
*   TeamRedMiner v0.5.6 (MTP algo improvements up to +3%)

[dimafern]

0.6-58@190722
What's new?
*   Bminer v15.7.3 (improved performance cuckaroo29d)
*   XMR-Stak v2.10.6 (fix cryptonight_v8 and derived pows)

[dimafern]

0.6-58@190724
What's new?
*   Bminer v15.7.4 (improved performance cuckaroo29d/AE, added 4G solver for cuckaroo29d)
*   SGminer-djm34 v0.1.2 (improved hashrate)
*   CCminer-djm34 v1.1.24 (better handling pool connection,  sliglty improved speed on 20x cards)
*   ETHminer v0.18.0 (Release, CUDA 10.0 build)
*   Fixed issue XMR-Stak v2.10.6 with stable image

[logicalray77]

WEB INTERFACE UPDATE July 20, 2019

Major changes in this update:

• New miner - NoncerPro OpenCL / CUDA
• Improved Schedules
• Changed the “Disable GUI on boot” switch
• Optimized GPU Hub for big farms
• New option in the “Add Wallet” form
• Various bug fixes

Detailed changelog here

Hi, A cool new feature like seeing clock and mem speed on the GPU page would be greatly appreciated. 

[mandown]

how disable any gpu

please add disable butoon any card.

[Boriss]

how disable any gpu

please add disable butoon any card.

Same as in any miner on windows platform you put in command line only devices that you want to start mining with.
So there is no disable but you can define which devices will start, if you don't specify devices then miner starts with all available device it finds.

ccminer has switch to select devices and starts from 0 and up  -d0,1,4,5,7 other miners also have some kind of switches for the same thing

[dimafern]

Schedules
Control your workers by time

Videoguide "Schedules"
Manage workers on a schedule. Create events to launch flight sheets or execute various commands.

See on YouTube: https://youtu.be/adKdAoul_N8

[dimafern]

Web Interface Update July 25, 2019
*   Changed behavior when changing pool in the flight sheet
*   Fixed text when farm removed
*   Added hint for Antminer S17/S17pro/T17

[dimafern]

0.6-58@190725
What's new?
*   Gminer v1.53 (improved performance for EQ 144/5 and 192/7 on RTX cards)
*   CCminer-djm34 v1.1.25 (stability improvement)
*   CCminer-enemy/Z-Enemy v2.1 (performance improvements: +4-5% most algos: x16r/x16s/x17/hex/bitcore/bcd)
*   XMRig v2.99.1-beta (added randomx/loki support. Notice: since this is a beta version, you must directly select the version of the miner in the flight list / miner settings)

[georat72]

0.6-58@190725
What's new?
*   Gminer v1.53 (improved performance for EQ 144/5 and 192/7 on RTX cards)
*   CCminer-djm34 v1.1.25 (stability improvement)
*   CCminer-enemy/Z-Enemy v2.1 (performance improvements: +4-5% most algos: x16r/x16s/x17/hex/bitcore/bcd)
*   XMRig v2.99.1-beta (added randomx/loki support. Notice: since this is a beta version, you must directly select the version of the miner in the flight list / miner settings)

When you will upload new Bminer?

[dimafern]

0.6-59@190730
What's new?
*   Nvidia OC fix for GTX 16xx and RTX 20xx cards (still no fan control for RTX)
*   Bminer v15.7.6 (improved the performance of the miner of Cuckatoo31, increased the dynamic ranges of -intensity)
*   PhoenixMiner v4.5c (fixed issue with ProgPOW BCI mining on Nvidia RTX20x0 and GTX16x0 cards)
*   CCminer-djm34 v1.1.26 (stability improvement: rearrange how the cards are assigned to thread)
*   XMRig v2.99.3-beta (as replace for v2.99.1-beta: fixed hwloc auto configuration on AMD FX CPUs, added NUMA support via hwloc, fixed miner freeze when switch between RandomX variants, fixed dataset initialization speed. Notice: since this is a beta version, you must directly select the v2.99.1-beta of the miner in the flight list / miner settings)

[dimafern]

0.6-59@190802
What's new?
*   NanoMiner v1.5.3 (fixed issue with Nvidia devices not shown on nanominer -d output)
*   CCminer v3.9.6.2 (added new algo blake2b, faster myr-gr on Ryzen using SHA, faster blake2s SSE2, small speedup of around 1% for several other algos)
*   XMRig fork: XMRigCC v1.95 (integrated algos: cn-conceal, argon2-512 "chukwa", argon2-256 "chukwa-wrkz")
*   XMR-Stak 2.10.7 (fixed Nvidia critical bug, optimize VEGA auto suggestion, removed unsupported currencies: turtlecoin, xcash, loki)

[dimafern]

0.6-60@190805
*   `net-test` added ping and responce times
*   added more accurate LA checks to watchdog (prevent reboots on short LA peaks)
*   fixed exit code `amd-oc` and `nvidia-oc`
*   `selfupgrade` has new option `--force option` (force update of HiveOS in situations when `selfupgrade` says Hive is up to date but this is not true)
*   WildRig-Multi v0.19.1 (added glt-globalhash, glt-hex algos, implemented GPUs monitoring)
*   CPUminer-opt v3.9.7 (new parameters for yescrypt/yespower algos - param-n, param-r, param-key)
*   T-Rex v0.13.0 (added tensority algorithm, added dedal algorithm back, added SSL support)
*   XMRig v2.99.4-beta (fixed compatibility with hwloc 1.10.x, optimized RandomX initialization and switching, fixed rare crash when re-initialize dataset)
*   CCminer-djm34 v1.2.0 (better handling of eventual packet losses)
*   NEW CCminer-xaya v0.1 (fork which support neoscrypt-xaya algo)
*   NEW TT-Miner v3.0.0 (Nvidia miner supported algos: Ethash,Lyra2Rev3,MTP,Myr-Gr,ProgPoW variants,TetHashV1,UbqHash)

Web Interface Update
*   New miner support - TT-Miner
*   Improved refill deposit form
*   Added button “Copy” for URL of SSH direct-string Hive Shell to clipboard
Detailed changelog here.

[dimafern]

0.6-60@190806
What's new?
*   T-Rex v0.13.1 (bug fixes: tensority max nonce for BTM, "Unregistered stratum method" error on some pools)
*   TeamRedMiner v0.5.7 (added support cn-conceal and cuckarood algos)
*   TT-Miner v3.0.1 (bug fix: hashrate reporting; small fixes Hive control scripts)

[WBrainDamage]

Hello.

Schedule option doesn´t properly start the miner, giving an error in the address, like this:

"[2019-08-07 08:03:53] Pool pool.supportxmr.com connecting to address 37.187.95.110. [2019-08-07 08:03:53] Pool pool.supportxmr.com successfully connected to address 37.187.95.110. [2019-08-07 08:03:53] **Pool pool.supportxmr.com login failed. Error code: -1 - Invalid payment address provided (65 ms)**"

Error is happening only trough the schedule option, if i start the exactly the same flightsheet manualy it will run smootly. It happens in all scheduled flightsheets, and all of them work when started manualy.

Best regards.

[hydnoracoin]

0.6-60@190805
*   `net-test` added ping and responce times
*   added more accurate LA checks to watchdog (prevent reboots on short LA peaks)
*   fixed exit code `amd-oc` and `nvidia-oc`
*   `selfupgrade` has new option `--force option` (force update of HiveOS in situations when `selfupgrade` says Hive is up to date but this is not true)
*   WildRig-Multi v0.19.1 (added glt-globalhash, glt-hex algos, implemented GPUs monitoring)
*   CPUminer-opt v3.9.7 (new parameters for yescrypt/yespower algos - param-n, param-r, param-key)
*   T-Rex v0.13.0 (added tensority algorithm, added dedal algorithm back, added SSL support)
*   XMRig v2.99.4-beta (fixed compatibility with hwloc 1.10.x, optimized RandomX initialization and switching, fixed rare crash when re-initialize dataset)
*   CCminer-djm34 v1.2.0 (better handling of eventual packet losses)
*   NEW CCminer-xaya v0.1 (fork which support neoscrypt-xaya algo)
*   NEW TT-Miner v3.0.0 (Nvidia miner supported algos: Ethash,Lyra2Rev3,MTP,Myr-Gr,ProgPoW variants,TetHashV1,UbqHash)

Web Interface Update
*   New miner support - TT-Miner
*   Improved refill deposit form
*   Added button “Copy” for URL of SSH direct-string Hive Shell to clipboard
Detailed changelog here.

HORA is working on HIVE OS???

and today started trading HYDNORA (hora)  on TT-miner

[dimafern]

0.6-61@190810
What's new?

Linux/Hive:
*   selfupdate now also accepts -f (as well --force) to force update and one more fix for "Hive is up to date"
*   VBIOS flashing bug fix: stop autofan & watchdog before AMD VBIOS flash to prevent possible reboots on gpu-stat errors

Miners:
*   T-Rex v0.13.2 (tensority nonce fix for antpool)
*   CryptoDredge v0.21.0 (added support algos: chukwa, chukwa-wrkz, cn-ccx; added support SSL connections)
*   XMRig v2.99.5-beta (Hive: fixed config generation for v2.99.2-beta and higher, Miner: many bug fixes and improvements)
*   Gminer v1.54 (fixed bug with auto-switching to BeamHashII, added AMD support for BeamHashII, support GRIMM coin for Nvidia and AMD cards)