NanoTokens Information thread MOVED

[fishy]

And how can I solo mine in cgminer?
This?
cgminer.exe --scrypt -o http://127.0.0.1:7578 -u username123 -p password123 --thread-concurrency 8192 -I 10 -g 1 -w 256

[1715157316]

1715157316

[1715157316]

1715157316

[1715157316]

1715157316

[1715157316]

1715157316

[iANDROID]

And how can I solo mine in cgminer?

CGMiner:

cgminer --scrypt -o 127.0.0.1:7578 -u 1 -p 1 --intensity 10 --worksize 256 -g 2

.conf:

rpcuser=1   
rpcpassword=1
rpcallowip=127.0.0.1
rpcport=7578
port=17578
daemon=1
server=1
gen=0
addnode=60.230.201.155
addnode=173.216.107.124
queue=0
scantime=1

[r3wt]

And how can I solo mine in cgminer?

its a scrypt coin, so may want to try guiminer-scrypt it comes with 3 different mining softwares preconfigured for scrypt

[fishy]

And how can I solo mine in cgminer?

its a scrypt coin, so may want to try guiminer-scrypt it comes with 3 different mining softwares preconfigured for scrypt

Ok, can you tell me how I can config it?

[iANDROID]

> Mr8kdSqb5duoky226r3XpdLmeuEUJ89Keb

Where are my coins?

[The_Catman]

And how can I solo mine in cgminer?

its a scrypt coin, so may want to try guiminer-scrypt it comes with 3 different mining softwares preconfigured for scrypt

If he's using straight cgminer that's better.

Code:

cgminer.exe --scrypt -o 127.0.0.1:7578 -u <username> -p <password>

Is all the necessary bits for mining it, assuming you're on the same machine as the client.

You need to make sure that server=1 and <username>/<password> are the same as it is set in the .conf, in my case this is usually "Jack" and "fnord".

Make sure you've restarted the client after saving the .conf.

[MobGod]

LINUX USERS: download the linux tar.gz source, and replace the nano-qt.pro with this: http://nano.coinbit.pw/x_dl/nano-qt.pro

ok i tried this also not working can you just update the zip with the correct info so people can download it ?

[fishy]

Is this correct?

CGMiner:

cgminer --scrypt -o 127.0.0.1:7578 -u 1 -p 1 --intensity 10 --worksize 256 -g 2

.conf:

rpcuser=1   
rpcpassword=1
rpcallowip=127.0.0.1
rpcport=7578
port=17578
daemon=1
server=1
gen=0
addnode=60.230.201.155
addnode=173.216.107.124
queue=0
scantime=1

[The_Catman]

LINUX USERS: download the linux tar.gz source, and replace the nano-qt.pro with this: http://nano.coinbit.pw/x_dl/nano-qt.pro

ok i tried this also not working can you just update the zip with the correct info so people can download it ?

Find these lines near the top

Code:

windows:LIBS += -lshlwapi
LIBS += $$join(BOOST_LIB_PATH,,-L,) $$join(BDB_LIB_PATH,,-L,) $$join(OPENSSL_LIB_PATH,,-L,) $$join(QRENCODE_LIB_PATH,,-L,)
LIBS += -lssl -lcrypto -ldb_cxx$$BDB_LIB_SUFFIX
windows:LIBS += -lws2_32 -lole32 -loleaut32 -luuid -lgdi32
LIBS += -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53
BOOST_LIB_SUFFIX=-mgw46-mt-sd-1_53
BOOST_INCLUDE_PATH=C:/deps/boost
BOOST_LIB_PATH=C:/deps/boost/stage/lib
BDB_INCLUDE_PATH=c:/deps/db/build_unix
BDB_LIB_PATH=c:/deps/db/build_unix
OPENSSL_INCLUDE_PATH=c:/deps/ssl/include
OPENSSL_LIB_PATH=c:/deps/ssl

and either comment them all out (prefix with "# ") or just delete them.

[Entz]

LINUX USERS: download the linux tar.gz source, and replace the nano-qt.pro with this: http://nano.coinbit.pw/x_dl/nano-qt.pro

ok i tried this also not working can you just update the zip with the correct info so people can download it ?

Yeah I had the same problem. Still has references to c: and windows libraries.

Here is a working Makefile (at least for me when compiling under Ubuntu 13.0.4)

{See below for Cats binaries, my makefile is no longer needed }

So far it seems to be okay...

Edit: Binaries now available. See below.

[The_Catman]

Is this correct?

CGMiner:

cgminer --scrypt -o 127.0.0.1:7578 -u 1 -p 1 --intensity 10 --worksize 256 -g 2

.conf:

rpcuser=1   
rpcpassword=1
rpcallowip=127.0.0.1
rpcport=7578
port=17578
daemon=1
server=1
gen=0
addnode=60.230.201.155
addnode=173.216.107.124
queue=0
scantime=1

This doesn't go in the conf:

Code:

queue=0
scantime=1

Those are options for the miner, not the wallet. You'd add them by putting "-q 0 -s 1" at the end of the miner string like so:

Code:

cgminer --scrypt -o 127.0.0.1:7578 -u 1 -p 1 --intensity 10 --worksize 256 -g 2 -q 0 -s 1

Otherwise, yeah, if you've made sure to restart the client after saving the conf that should work. It may take awhile for anything to start pouring in though, so be patient.

[MobGod]

LINUX USERS: download the linux tar.gz source, and replace the nano-qt.pro with this: http://nano.coinbit.pw/x_dl/nano-qt.pro

ok i tried this also not working can you just update the zip with the correct info so people can download it ?

Find these lines near the top

Code:

windows:LIBS += -lshlwapi
LIBS += $$join(BOOST_LIB_PATH,,-L,) $$join(BDB_LIB_PATH,,-L,) $$join(OPENSSL_LIB_PATH,,-L,) $$join(QRENCODE_LIB_PATH,,-L,)
LIBS += -lssl -lcrypto -ldb_cxx$$BDB_LIB_SUFFIX
windows:LIBS += -lws2_32 -lole32 -loleaut32 -luuid -lgdi32
LIBS += -lboost_system-mgw46-mt-sd-1_53 -lboost_filesystem-mgw46-mt-sd-1_53 -lboost_program_options-mgw46-mt-sd-1_53 -lboost_thread-mgw46-mt-sd-1_53
BOOST_LIB_SUFFIX=-mgw46-mt-sd-1_53
BOOST_INCLUDE_PATH=C:/deps/boost
BOOST_LIB_PATH=C:/deps/boost/stage/lib
BDB_INCLUDE_PATH=c:/deps/db/build_unix
BDB_LIB_PATH=c:/deps/db/build_unix
OPENSSL_INCLUDE_PATH=c:/deps/ssl/include
OPENSSL_LIB_PATH=c:/deps/ssl

and either comment them all out (prefix with "# ") or just delete them.

Cat I did that still same error ,

[The_Catman]

Cat I did that still same error ,

What's the actual error you're getting?

[MobGod]

Cat I did that still same error ,

What's the actual error you're getting?

obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [nanotokend] Error 1

[The_Catman]

Cat I did that still same error ,

What's the actual error you're getting?

obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [nanotokend] Error 1

Make sure that

Code:

OBJECTS_DIR = build
MOC_DIR = build
UI_DIR = build

are all set to equal build.

Also make sure you have all the dependencies installed:

Code:

sudo apt-get install libboost-all-dev qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libminiupnpc-dev qt4-default libdb++-dev git qt-sdk

should cover everything.

I'm building on my laptop right now (Ubuntu-GNOME 13.04) and I'll share the binaries as soon as it's done.

Edit: nanotokend and nano-qt for linux are now available here.

[MobGod]

Cat I did that still same error ,

What's the actual error you're getting?

obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [nanotokend] Error 1

Make sure that

Code:

OBJECTS_DIR = build
MOC_DIR = build
UI_DIR = build

are all set to equal build.

Also make sure you have all the dependencies installed:

Code:

sudo apt-get install libboost-all-dev qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libminiupnpc-dev qt4-default libdb++-dev git qt-sdk

should cover everything.

I'm building on my laptop right now (Ubuntu-GNOME 13.04) and I'll share the binaries as soon as it's done.

Edit: QT is up, daemon will be ready in a minute. https://drive.google.com/folderview?id=0B82OOXRXzyeacC1TSlBIRXVwbDg&usp=sharing

ok i tried what you told me still nothing errrrrr
EDIT ok i did download that now what just replace the qt there is there now with that one? btw i'm trying to compile src does that matter ?

[The_Catman]

ok i tried what you told me still nothing errrrrr
EDIT ok i did download that now what just replace the qt there is there now with that one? btw i'm trying to compile src does that matter ?

I uploaded the compiled binaries for linux. It should work for most people (especially if you're on Ubuntu 13.04) if you just run it as is.

Edit: Here's the nano-qt.pro file I used, if you still want/need to compile it yourself. I used muddafudda's repo for the source. (replace his qt.pro with mine)

[MobGod]

Cat I did that still same error ,

What's the actual error you're getting?

obj/addrman.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
make: *** [nanotokend] Error 1

Make sure that

Code:

OBJECTS_DIR = build
MOC_DIR = build
UI_DIR = build

are all set to equal build.

Also make sure you have all the dependencies installed:

Code:

sudo apt-get install libboost-all-dev qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libminiupnpc-dev qt4-default libdb++-dev git qt-sdk

should cover everything.

I'm building on my laptop right now (Ubuntu-GNOME 13.04) and I'll share the binaries as soon as it's done.

Edit: nanotokend and nano-qt for linux are now available here.

still getting the same error from the file i downloaded from you
EDIT: so what your telling me is to just try to run the qt and don't compile this correct ?

[coinerd]

These live streaming webcams in the client are AWESOME.

And I think it made my windows run faster, too.

I can already hear the nearby children laughing with joy.

NANOTOKEN


It's The Future

 

congrats r3wt

[The_Catman]

so what your telling me is to just try to run the qt and don't compile this correct ?

Yes, the first file I uploaded were compiled binaries. I've also now uploaded the nano-qt.pro file i used if you still want to compile it yourself.

Here's the nano-qt.pro file I used, if you still want/need to compile it yourself. I used muddafudda's repo for the source. (replace his qt.pro with mine)