SucreDev (OP)
|
|
December 26, 2017, 03:34:52 AM |
|
I now have a masternode setup... I think.
I've got another bunch of coins I bought, too. You said you can't setup two on the same server, right? Can't do it by hostname or anything?
Sorry, Never said that. Having multiple masternodes on same IP/server is not recommended, not supported and absolutely not encouraged. since the goal here is to have a strong network spread around the world. multiple masternodes on one IP is more damaging for the network and not fare to the community.
|
|
|
|
aronschatz
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 26, 2017, 03:41:56 AM |
|
I get it, I was just curious. I might spin up another server with a larger swap with 1GB of RAM and do another masternode. I'll put it in another datacenter, too.
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 03:45:13 AM |
|
I get it, I was just curious. I might spin up another server with a larger swap with 1GB of RAM and do another masternode. I'll put it in another datacenter, too.
Perfect, good plan! Thanks for understanding.
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 03:54:47 AM |
|
Thanks for updating - unfortunately, it keeps saying permission denied on the last step.
ubuntu@i:~$ sudo echo "/var/swap.img none swap sw 0 0" >> /etc/fstab -bash: /etc/fstab: Permission denied ubuntu@ip-172-26-3-111:~$ free total used free shared buff/cache available Mem: 498380 40512 269172 1848 188696 425816 Swap: 0 0 0
This is because you did the swapoff /var/swap.img command just do swapon /var/swap.img then echo "/var/swap.img none swap sw 0 0" >> /etc/fstab then (to see if it's working) free I didn't put the swapoff in the PDF guide (was just for info on how to turn off)
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 04:14:32 AM |
|
Sucre Coin Pool - Stratum : all45.ru:3009 - Diff: 0.5
- Stratum : all45.ru:3254 - Diff: 1
- User : YOUR_ADDRESS
- Password : x
Hi and thanks will add it to main website and first page announcement. might want to change to 40 block confirm (as Sucre spec)
|
|
|
|
InSights_ZA
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 26, 2017, 06:32:35 AM |
|
Ha лoкaльнoм кoшeлькe Bиндoвc Инcтpyмeнты - КOHCOЛЬ OTКЛAДКИ, ввoдитe кoмaндy: getnewaddress MasterNode1 oтвeт S......................Q; sendtoaddress S......................Q 1000 oтвeт 9...................b; ждeм пoдтвepждeниe oплaты. пoтoм masternode genkey J................................a; masternode outputs ............................ 1 Пepexoдим нa VPS кoшeлeк пoд виндoвc. Инcтpyмeнты - oткpыть фaйл нacтpoйки кoшeлькa ввoдим rpcuser=someuser rpcpassword=somepass server=1 daemon=1 listen=1 rpcport=9336 rpcallowip=127.0.0.1 masternode=1 masternodeprivkey=J..........................a externalip=XXX.XXX.XXX.XXX coxpaняeм, пepeзaпycкaeм. пepexoдим нa лoкaльный кoшeлeк... ввoдим MN1 XXX.XXX.XXX.XXX:9336 J...............................a 9...................................b 1 Cool, will try this out later...just busy with the holiday season. Will post here on how it goes for others on a windows server
|
|
|
|
alexrossi
Legendary
Offline
Activity: 3850
Merit: 1745
Join the world-leading crypto sportsbook NOW!
|
|
December 26, 2017, 08:34:46 AM |
|
What is the version of Ubuntu? and did you follow the procedure exactly like in the guide? (see below) sudo apt -y update && sudo apt -y install build-essential libssl-dev libdb++-dev libboost-all-dev libcrypto++-dev libqrencode-dev libminiupnpc-dev libgmp-dev libgmp3-dev autoconf autogen automake libtool autotools-dev pkg-config bsdmainutils software-properties-common libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev -y git clone https://github.com/sucremoneda/SucreCore.gitgit clone https://github.com/dashpay/dash.git # (to fix a bug in secp256k1) rm -rf ~/SucreCore/src/secp256k1 cp -r ~/dash/src/secp256k1 ~/SucreCore/src/secp256k1 cd SucreCore find . -name "*.sh" -exec sudo chmod 755 {} \; ./autogen.sh ./configure # or ./configure --without-gui make Going to try today later, but wasn't easier to replace directly in the repo the secp256k1 folder?
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 11:39:38 AM Last edit: December 26, 2017, 01:03:34 PM by SucreDev |
|
What is the version of Ubuntu? and did you follow the procedure exactly like in the guide? (see below) sudo apt -y update && sudo apt -y install build-essential libssl-dev libdb++-dev libboost-all-dev libcrypto++-dev libqrencode-dev libminiupnpc-dev libgmp-dev libgmp3-dev autoconf autogen automake libtool autotools-dev pkg-config bsdmainutils software-properties-common libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev -y git clone https://github.com/sucremoneda/SucreCore.gitcd SucreCore find . -name "*.sh" -exec sudo chmod 755 {} \; ./autogen.sh ./configure # or ./configure --without-gui make Going to try today later, but wasn't easier to replace directly in the repo the secp256k1 folder? Finally found the problem, you can skip the DASH fix (for new installation) If you want to fix your current git clone (see below) git clone https://github.com/dashpay/dash.git # (to fix a bug in secp256k1) rm -rf ~/SucreCore/src/secp256k1 cp -r ~/dash/src/secp256k1 ~/SucreCore/src/secp256k1
|
|
|
|
aronschatz
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 26, 2017, 02:14:40 PM |
|
How often do masternode payments come around at the current amount? Is there any way to "really" check that the masternode we setup is actually working?
|
|
|
|
ant1113
Member
Offline
Activity: 98
Merit: 10
|
|
December 26, 2017, 03:26:48 PM Last edit: December 26, 2017, 03:47:54 PM by ant1113 |
|
Please support me In the master node, when setting is completed and restarted Displayed that it can be started only with lisson = 0 Can not start with lisson = 1 https://imgur.com/a/ODhSehttps://imgur.com/a/kh9Nuplease tell me:'(
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 03:45:08 PM |
|
How often do masternode payments come around at the current amount? Is there any way to "really" check that the masternode we setup is actually working?
well yes, is in the guide page 9. http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdfsucr-cli masternode debug You should see the message "successfully started masternode". sucr-cli masternode debug Did it work? You should see the message "successfully started masternode". Approx 576 blocks per day / currently 199 masternodes = 2.89 payment per day.
|
|
|
|
alexrossi
Legendary
Offline
Activity: 3850
Merit: 1745
Join the world-leading crypto sportsbook NOW!
|
|
December 26, 2017, 03:49:56 PM |
|
Still the same error, maybe my ubuntu version is too old
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 03:55:31 PM |
|
Still the same error, maybe my ubuntu version is too old
What version? work fine on 14.04 and 16.04. prior to that will not work, and 17.04 and 17.10 are to recent and g++ not yet compatible.
|
|
|
|
fusionfoto
|
|
December 26, 2017, 04:00:31 PM |
|
Thanks.
2GB RAM is a steep requirement, especially for Linux, unless there is a way to install multiple nodes and just specify different ports in one VPS. I think this might be one of those coins where you need at least 10 nodes to make a decent passive income from it.
So you don't need 2GB, and you can certainly run other MNs (from other coins) on the same server. I know one company offering $5/month Raspberry Pi hosting which is about the same as a VPS without shared hardware.
|
|
|
|
aronschatz
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 26, 2017, 04:02:14 PM |
|
$ sucr-cli masternode debug Masternode successfully started
This was on the masternode computer.
The client computer (my personal wallet) doesn't show the same message, which I think makes sense.
|
|
|
|
SucreDev (OP)
|
|
December 26, 2017, 04:06:44 PM |
|
You are trying a different way to run a masternode that I have never tested. You are trying to start a Masternode from that same masternode. There is probebly other ways to do this but for the moment I support the Masternode Setup guide http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdfOther users successfully run nodes on windows server as well.
|
|
|
|
aronschatz
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 26, 2017, 04:12:08 PM |
|
I see a transaction under the category "generate" going to the receiving address of the Masternode. Is that the category that the masternode fee gets labeled under? If so, seems to work.
|
|
|
|
ant1113
Member
Offline
Activity: 98
Merit: 10
|
|
December 26, 2017, 04:36:59 PM |
|
You are trying a different way to run a masternode that I have never tested. You are trying to start a Masternode from that same masternode. There is probebly other ways to do this but for the moment I support the Masternode Setup guide http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdfOther users successfully run nodes on windows server as well. It is said that we do not support this way Ubuntu is not good at it, so I do not know well, so I want to start the master node in this way
|
|
|
|
Depink
Newbie
Offline
Activity: 26
Merit: 3
|
|
December 26, 2017, 06:10:33 PM |
|
You are trying a different way to run a masternode that I have never tested. You are trying to start a Masternode from that same masternode. There is probebly other ways to do this but for the moment I support the Masternode Setup guide http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdfOther users successfully run nodes on windows server as well. It is said that we do not support this way Ubuntu is not good at it, so I do not know well, so I want to start the master node in this way Hiho, i'm in the same point as you, MN is up but WATCHDOG_EXPIRED, so we need to find a way to setup sentinel over windows :p I'm looking over the internet, but is hard to find the right files/configs... :9
|
|
|
|
siera77772
Newbie
Offline
Activity: 12
Merit: 0
|
|
December 26, 2017, 08:20:08 PM |
|
how i can get coins?
|
|
|
|
|