Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 06, 2017, 09:20:04 PM Last edit: December 07, 2017, 04:34:12 AM by Yoledo |
|
ive recently built my first mining rig with the following asrock h81 probtc r2.0 intel 3258 4gb ram 120gb ssd evga 1000w gold 2x pny NVidia gtx 1050ti 1 gigabyte gtx 1050ti 1 evga 1050ti windows 10 build 1703 when I initially set it up it would only read one gpu, after doing the hackflags registry edit and increasing virtual memory to 16000 and going back to windows 1703 from 1709 I got it to read all 4 but gives me a code 12 on one https://imgur.com/a/I90d0I emailed asrock and they sent me a bios update for 1.3b which enabled 4g decoding and it didn't help. ive disabled sound, lan and onboard video from bios, set pci speed to gen1 and still get a lack of resources. shit, ive even gone as far as order another set of risers, another mobo, and a new ssd thinking that somehow that would fix it. the only thing I can think of now is I read somewhere that the cpu might be the culprit. Idk man, Ive been working on this for over a week and am at the end of my rope. any advice is appreciated! Will reward .0014 BTC for correct solution!
|
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 06, 2017, 09:48:54 PM |
|
its my second mobo lol when I had 2 cards connected it only let me run one, then with 3 it said code 12 on the third, now with 4 itll let me run three but code 12 on the 4th
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 07, 2017, 03:04:19 AM |
|
bump
|
|
|
|
Johny101010
|
|
December 07, 2017, 04:21:31 AM |
|
I'll bet you a whole Satoshi it is the risers. One thing that you can do though is test with Linux and when you find the same thing just fine out which riser is damaged and swap.
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 07, 2017, 04:27:43 AM |
|
I'll bet you a whole Satoshi it is the risers. One thing that you can do though is test with Linux and when you find the same thing just fine out which riser is damaged and swap.
I went through 12 different risers and all were good. I don't think it's a hardware as much as it's a bios/io problem.
|
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 07, 2017, 05:44:01 AM |
|
Ive tried that too. But thank you for the reply!
|
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 07, 2017, 06:17:14 AM |
|
There's no tolud setting on this motherboards bios, and I already have 4g rendering enabled.
|
|
|
|
Undefined31415
|
|
December 07, 2017, 09:15:46 AM |
|
Try setting PCIe link speed in the BIOS to GEN1. (Should that fail, try the other available options with this setting.) My guess is that PCIe lanes is your issue, since your system will likely default to having one card run in x8 mode, and 2 others run in x4 mode, causing problems for the fourth card.
Should that fail... Clear CMOS (use the jumper or remove the CMOS battery for about 10 seconds) Reseat CPU Reseat RAM
|
|
|
|
analyzing
|
|
December 07, 2017, 09:18:16 AM |
|
Please pm me , i can fix this issue via team-viewer , if you are interested
|
QORA ⊙Decentralized hosting. ⊙ Decentralized social network ⊙Voting system.
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 07, 2017, 02:06:29 PM |
|
Try setting PCIe link speed in the BIOS to GEN1. (Should that fail, try the other available options with this setting.) My guess is that PCIe lanes is your issue, since your system will likely default to having one card run in x8 mode, and 2 others run in x4 mode, causing problems for the fourth card.
Should that fail... Clear CMOS (use the jumper or remove the CMOS battery for about 10 seconds) Reseat CPU Reseat RAM
tried running pcie speed as gen 1, gen 2, and auto, still no resources. just tried clearing cmos, reseating cpu and ram and nothing. thank you though https://i.imgur.com/3MsQtCw.jpg
|
|
|
|
R0land
Jr. Member
Offline
Activity: 208
Merit: 3
|
|
December 07, 2017, 02:34:03 PM |
|
I also think, that you have problems with the pci-e lanes config from the mainboard. You can use a 1 to 4 pci-e hub to use 4 cards in 1 pci-e slot from your mainboard.
|
|
|
|
smoolae
|
|
December 07, 2017, 03:37:24 PM |
|
Just saying, but a lot of people are having problems with ASRock h81 probtc r2.0. I was also one of them. And it does seem like PCI-E slot issue. Like R0land said: I also think, that you have problems with the pci-e lanes config from the mainboard. You can use a 1 to 4 pci-e hub to use 4 cards in 1 pci-e slot from your mainboard. Cool Posted on: Today at 02:06:29 PM Posted by: Yoledo
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
December 07, 2017, 03:56:41 PM |
|
enable gen1/4g decoding in bios disable audio, sata ports and everything else what u dont need in bios try to increase systemagent offset voltage +0.1 - 0.5 increase min/max virtual memory
i had this mobo running with 7 gpus stable
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 08, 2017, 12:21:18 AM |
|
all my gpus show up under pci express except the last one thats under pci to pci bridge but even then that gpu isnt the problem, its the one attached to pci express root 1 https://imgur.com/a/CHdoo
|
|
|
|
Miner3000
Newbie
Offline
Activity: 5
Merit: 0
|
|
December 08, 2017, 02:56:46 AM |
|
all my gpus show up under pci express except the last one thats under pci to pci bridge but even then that gpu isnt the problem, its the one attached to pci express root 1 https://imgur.com/a/CHdoo Try uninstalling hd audio controllers, not just deactivating them
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 08, 2017, 03:10:54 AM |
|
everytime I uninstall I wait a few minutes and they come right back
|
|
|
|
Yoledo (OP)
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 08, 2017, 04:11:17 AM |
|
Bounty still up!
|
|
|
|
|