grivero1983 (OP)
Newbie
Offline
Activity: 12
Merit: 4
|
|
January 04, 2018, 06:24:42 PM |
|
As a precaution, always do this porcedures at your own risk.
Hey guys, just find a solution for this issue that was driving me insane like a lot of people with the same problem. I have two Antminer S9, one is 13.0 TH and one is 13.5 TH, both are Autofreq, the issue at hand is that the miner goes up 100% maximum RPM on both fans every 10-20 seconds, and that its really anoying specially with those with miners at home. I just figured out a solution taking a tread with the Antminers S7 that gave me the same solution when i needed to shut down the beep when the internet was down!, for those who had S7's you could notice that this beep was anoying from hell!. But some guy found the solution to shut down the beep by modifying the HTML code in the browser, No linux, no programming, just FN+F12 and follow some steps and the secret menu options will display. Just like the old miners S5, S7 that had this options. Let's start! First open your browser in this example i will use Firefox. https://eximmagazine.files.wordpress.com/2018/01/1.jpghttps://eximmagazine.files.wordpress.com/2018/01/2.jpghttps://eximmagazine.files.wordpress.com/2018/01/3.jpghttps://eximmagazine.files.wordpress.com/2018/01/4.jpghttps://eximmagazine.files.wordpress.com/2018/01/5.jpghttps://eximmagazine.files.wordpress.com/2018/01/6.jpghttps://eximmagazine.files.wordpress.com/2018/01/7.jpgIf you need further help, please let me know. If you find my post interesting and solved your issue consider donating, the amount its not important just to know you are gratefull it's fine for me. BTC: 1FV1t9cKq3pybtGojprV6K1P8oshA5yDpe Regards. Grivero1983
|
|
|
|
dlezama
Member
Offline
Activity: 140
Merit: 17
|
|
January 04, 2018, 06:38:44 PM |
|
Interesting, will this disable autotune? I like the idea of fixing the fan so it stops cycling, but I want to leave autotune on.
|
|
|
|
grivero1983 (OP)
Newbie
Offline
Activity: 12
Merit: 4
|
|
January 04, 2018, 07:38:24 PM |
|
It wont disable the autotune mode. Just enable in the hidden funtions of the fan control and leave the freq just as it is.
Regards.
Grivero1983
|
|
|
|
lrowland21093
Member
Offline
Activity: 85
Merit: 16
|
|
January 04, 2018, 08:45:20 PM |
|
I played with these hidden settings also. The did seem to affect the intake fan but not the primary (and louder) outtake one. Bitmain seems to have written the autotune firmware to ignore the fan % setting on one fan (and most of the other hidden options). That is probably why they hid the options!
|
|
|
|
fanatic26
|
|
January 04, 2018, 09:44:50 PM |
|
I played with these hidden settings also. The did seem to affect the intake fan but not the primary (and louder) outtake one. Bitmain seems to have written the autotune firmware to ignore the fan % setting on one fan (and most of the other hidden options). That is probably why they hid the options!
The intake fan is the one that spins faster, the exhaust side is the slower one.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 18, 2018, 04:18:05 AM |
|
How do you save the changes? I cant get the fan % to show up
|
|
|
|
grivero1983 (OP)
Newbie
Offline
Activity: 12
Merit: 4
|
|
January 18, 2018, 04:32:09 AM |
|
How do you save the changes? I cant get the fan % to show up
Hello have you followed the proceedures on the images i published ? you have first to modify the html code in the miner configuration window when the % appears yoy put the number and then click save in order to save the changes. Regards, GRivero1983
|
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 18, 2018, 01:05:54 PM |
|
yes, when I delete the word :none and leave it just as you described there is no fan option displayed on the tab still.
|
|
|
|
HoleShot
Member
Offline
Activity: 70
Merit: 34
|
|
January 21, 2018, 06:28:18 AM |
|
I'm developing a liquid cooled S9. I need a way to unplug the fans as they are not needed and I don't want to power them. Any suggestions welcome.
|
|
|
|
Megaquake
|
|
January 21, 2018, 07:30:28 AM |
|
Easier way
Add these line to /config/bmminer.conf using winscp set connection file protocol SCP
"bitmain-fan-ctrl" : true, "bitmain-fan-pwm" : "90",
Then restart bmminer logging SSH using putty
/etc/init.d/bmminer.sh restart
When finished fans will run at 90% or whatever % bitmain-fan-pwm is set to.
|
Mines at Kano.is best profit in the world!
在Kano.is的BTC
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 22, 2018, 03:24:20 AM |
|
Using what? Are there more detailed instructions somehwere?
|
|
|
|
HoleShot
Member
Offline
Activity: 70
Merit: 34
|
|
January 22, 2018, 08:47:43 AM |
|
Easier way
Add these line to /config/bmminer.conf using winscp set connection file protocol SCP
"bitmain-fan-ctrl" : true, "bitmain-fan-pwm" : "90",
Then restart bmminer logging SSH using putty
/etc/init.d/bmminer.sh restart
When finished fans will run at 90% or whatever % bitmain-fan-pwm is set to.
Thanks so much. This may solve my problem by setting to 0%. Hopefully, the missing fans will not cause an alarm if set to zero. i'm not familiar with winscp and it's been decades since I used putty. I'll try to muddle through.
|
|
|
|
grivero1983 (OP)
Newbie
Offline
Activity: 12
Merit: 4
|
|
January 22, 2018, 06:17:17 PM |
|
yes, when I delete the word :none and leave it just as you described there is no fan option displayed on the tab still.
Please also delete the following line, then the options will appear in the panel. https://eximmagazine.files.wordpress.com/2018/01/nueva-imagen.jpgLet me know if it worked. Regards.
|
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 22, 2018, 08:37:08 PM |
|
nope, that wiped out my pool displys
|
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 22, 2018, 08:47:33 PM |
|
GOT IT!
worked in chrome for me, not sure why firefox wasn't working. now to test the fan setting!
|
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 24, 2018, 01:54:31 AM |
|
update: It works great on my S9 13.5T Auto-tune miner. The interface does indeed set both fans (front and back) based on percentage. I've played around with the speed from 60% to 90% to optimize power draw vs hashrate. 75% is my butter zone!
Thanks for this!
|
|
|
|
jeecom
Jr. Member
Offline
Activity: 56
Merit: 1
|
|
January 25, 2018, 12:01:43 AM |
|
When you use this option, don't you also have to choose a frequency? What happens if you use this to set a frequency on an auto-tune S9?
|
|
|
|
fyoung55
Member
Offline
Activity: 277
Merit: 70
|
|
January 25, 2018, 01:13:47 AM |
|
I'm not sure... I didn't enable that option, since I figured autotune would over-ride it. Anybody else try it?
|
|
|
|
castiel0504
Full Member
Offline
Activity: 266
Merit: 109
Ultra Mega Giga Super Cool Flying Oposum!
|
|
January 25, 2018, 10:32:11 PM |
|
This works perfectly! I havent tempered with frequenzy i only changed the percentage of which my S9 works, i put it at 100%(since im using some kind of box with sound isolation and temperature got quite high around 87C). and at the moment(2h of working there were no problems.
|
|
|
|
grivero1983 (OP)
Newbie
Offline
Activity: 12
Merit: 4
|
|
January 29, 2018, 11:41:32 PM |
|
When you use this option, don't you also have to choose a frequency? What happens if you use this to set a frequency on an auto-tune S9?
Very Interesting, thanks for sharing, could you post the page print of that mod. I wasn't sure to mess with the freq. because all my all my miners are autotune. When you set the freq to xxx MHZ does the 3 boards set to the same fqcy? Thanks. GRIVERO
|
|
|
|
|