[ANN] [CPR] | Copper Bars | Scrypt-Jane | GPU Efficiency JUST DROPPED

[minerapia]

few different cpu miners are found here:
http://yacointalk.com/index.php?topic=264.0
https://bitcointalk.org/index.php?topic=201027.0

Code:

minerd -o stratum+tcp://94.237.84.48:9777 -O yourewalletaddress+hashrate:anything -t numberofthreads
or (if the miner doesnt support stratum)
minerd -o http://94.237.84.48:9777 -O yourewalletaddress+hashrate:anything -t numberofthreads

stats at http://94.237.84.48:9777/static

You can set your share difficulty by adding +0.0000xxxx to your CPR address:

<YourWalletAddress>+0.000xxxx

Recommend share difficulty:

Hash Rate (KHash/s) Difficulty
1 +0.00000116
5 +0.00000582
10 +0.00001164
50 +0.00005821
100 +0.00011641
250 +0.00029103
500 +0.00058207
750 +0.00087310
1000 +0.00116414

[1715264083]

1715264083

[1715264083]

1715264083

[1715264083]

1715264083

[1715264083]

1715264083

[minerapia]

sorry my bad, restarted pool.
btw. missing part of the payout (its not full 0.0064 atm) is a rounding error It should correct itself when theres enough shares.

theres some bugs still in the code, but i wont touch it now, ill setup private test pool, where i can test new things out. I had to use public tests with the current one because there was issues with block submitting (I would have taken me forever to find a block solo)

[minerapia]

Because of the blockchain size, maybe online wallet would be nice addition. Tho atleast I cannot build one anytimesoon, dunno if theres even a git source or anything available.

[Lauda]

Time to buy some more bars 

[minerapia]

I see that the payout bug just gets worse when more ppl jump in, Im working on it but It will have to wait for tomorrow. Im off for today and wont be monitoring the pool. So if you suddenly dont get any payouts or stales hit 100% or something similar, switch to solo.

pm me if you find/suspect other bugs/issues/problems with the p2pool.

[trid]

Time to buy some more bars 

1 CPR for 1 BTC? 

[Lauda]

Time to buy some more bars 

1 CPR for 1 BTC? 

So you're thinking it has the same value of btc.. nice 

[reb0rn21]

CPR production per day its just 34 coins... diff is a bit up, duno about the price but i think if any exchange have it it should be in micro values

grrr for p2pool you need to put wallt adress and +0.xxxx i put space in between which is no good, no payouts (so no space in between)

[amosmc]

My 7950 got max 1.8Mh, other ppl with same get 2.6Mh/s duno why

this what im running on my 7950
--shaders 1792 -I 17 -w 256 --auto-fan --auto-gpu
runs at 61c @ 2.263m core 925 mem 1250

[reb0rn21]

I just did ~30min run on p2pool and then retested the income on freeleap poolcpr.coinmine.pl and i can say for me, poolcpr is better by ~40%

is it luck + reject rate + lower hash power or p2pool still have issues

for past two days poolcpr.coinmine.pl almost had no issue at all, steady auto pay with 1cpr works with no problems, the OP had issue at start, but for me its working gr8

[reb0rn21]

Hash rate dropped by ~15% on GPU has N changed?

[iGotSpots]

I just did ~30min run on p2pool and then retested the income on freeleap poolcpr.coinmine.pl and i can say for me, poolcpr is better by ~40%

is it luck + reject rate + lower hash power or p2pool still have issues

for past two days poolcpr.coinmine.pl almost had no issue at all, steady auto pay with 1cpr works with no problems, the OP had issue at start, but for me its working gr8

Ok, I'll add it back to the OP

[trid]

Hash rate dropped by ~15% on GPU has N changed?

confirm

N varies with difficulty? affects only GPU hash?

[aikklond]

I try to mine with minerd scrypt jane, on a 2600k.

1) in the p2p pool it says 0,25 k/hs  (per thread?) is this normal?

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

(minerd_scrypt_jane_x64_ssse3.exe -a scrypt-jane  -o http://cpr.coinmine.pl:7060 -u user -p pass)

[feeleep]

I try to mine with minerd scrypt jane, on a 2600k.

1) in the p2p pool it says 0,25 k/hs  (per thread?) is this normal?

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

(minerd_scrypt_jane_x64_ssse3.exe -a scrypt-jane  -o http://cpr.coinmine.pl:7060 -u user -p pass)

anyone released minerd for copperbars? I did not see it...

[aikklond]

I try to mine with minerd scrypt jane, on a 2600k.

1) in the p2p pool it says 0,25 k/hs  (per thread?) is this normal?

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

(minerd_scrypt_jane_x64_ssse3.exe -a scrypt-jane  -o http://cpr.coinmine.pl:7060 -u user -p pass)

anyone released minerd for copperbars? I did not see it...

I use the yacoin one as other member suggested

[ig0tik3d]

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

yacoin cpuminer don't support stratum

[aikklond]

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

yacoin cpuminer don't support stratum

can I use another cpu miner?

[ig0tik3d]

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

yacoin cpuminer don't support stratum

can I use another cpu miner?

try this
https://bitcointalk.org/index.php?topic=272170.msg2917021#msg2917021

[aikklond]

2) on the push-pool I get a Json_rpc_call failed ? how can i fix that?

yacoin cpuminer don't support stratum

can I use another cpu miner?

try this
https://bitcointalk.org/index.php?topic=272170.msg2917021#msg2917021

I am now using it on a 1090t and getting 165 kh/s I am a bit worried about Avast claiming there is a trojan there...