horrorshow (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
July 12, 2011, 09:53:01 PM |
|
I emailed them with this a few weeks ago: I'm running two radeon 5830's however I have found no way to successfully modify voltage, clock or memory on both cards, just the first one...this is an extreme disadvantage since in MSI afterburner at least I can do both cards, but if I want to slightly modify voltage on both I have no way of doing so. Is there anything I can do to change both cards voltage and clocks using Trixx? This would help me a lot as I am able to overclock this card highly, I just need to be able to do it on both of them instead of just the first.
I went out and bought a crossfire connector but it still doesn't work on both cards even with crossfire enabled.
Today, I got a response that some of you might find exciting: Enjoy!
|
|
|
|
Chick
Member
Offline
Activity: 70
Merit: 10
|
|
July 12, 2011, 09:54:19 PM |
|
I emailed them with this a few weeks ago: I'm running two radeon 5830's however I have found no way to successfully modify voltage, clock or memory on both cards, just the first one...this is an extreme disadvantage since in MSI afterburner at least I can do both cards, but if I want to slightly modify voltage on both I have no way of doing so. Is there anything I can do to change both cards voltage and clocks using Trixx? This would help me a lot as I am able to overclock this card highly, I just need to be able to do it on both of them instead of just the first.
I went out and bought a crossfire connector but it still doesn't work on both cards even with crossfire enabled.
Today, I got a response that some of you might find exciting: Enjoy! omgomgomgomgomgomgomgomgomgomgomg I LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE YOU
|
|
|
|
naypalm
Legendary
Offline
Activity: 1272
Merit: 1012
howdy
|
|
July 12, 2011, 10:07:53 PM |
|
Awesome, thanks for letting us know!
|
|
|
|
horrorshow (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
July 12, 2011, 10:08:16 PM |
|
omgomgomgomgomgomgomgomgomgomgomg I LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE LOVE YOU Just doin my jerb.
|
|
|
|
Clavulanic
|
|
July 13, 2011, 12:55:39 AM |
|
I love you. And I hate you. I just ate a big dinner after getting off of work and wanted to lay down and watch One Piece, but now I have to go overclock my rigs lol.
So it sounds like you can OC mutliple cards now, not just the 5830's. Can't wait to try it out.
|
|
|
|
██████████
████████
██████
████
██████
████████
██████████ | | | | | . Appreciate Coin | | | │ | Send and receive tokens in blogs and social media communities | │ | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄███▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀███▄ ▄████ ███ █████ ███ ████▄ ▄█████▄▄ ▄▄▄▄ ▄▄▄▄ ▄▄█████▄ ██████▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀██████ ██████ ███ █████ ███ ██████ ██████▄▄ ▄▄▄▄ ▄▄▄▄ ▄▄██████ ▀█████▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀█████▀ ▀████ ███ █████ ███ ████▀ ▀███▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄███▀ ▀█████████████████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ NO INFLATION . ▀▀▀▀▀▀▀▀ | | | | | ▄▄█████████▄▄ ▄███████▀▀▀███████▄ ▄████▀▀▀▀ ▄ ▀▀▀▀████▄ ▄████ ▄▄▄▄███▄▄▄▄ ████▄ ▄█████ ███████████ █████▄ ████▀ ▄██▀ ▀██▄ █████ ████ ████ ███ ████ ████ ████▄ ▀██▄ ▄██▀ █████ ▀█████ ███████████ █████▀ ▀████ ▀▀▀▀███▀▀▀▀ ████▀ ▀████▄▄▄▄ ▀ ▄▄▄▄████▀ ▀███████▄▄▄███████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ TECHNICAL INTEGRATIONS . ▀▀▀▀▀▀▀▀ | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄██████████▀██████████▄ ▄█████████▀ ▀█████████▄ ▄████████▀ ▀████████▄ █████████▄▄█▌ ▐█▄▄█████████ ████████████▌ ▐████████████ ████████████▌ ▐████████████ ▀███████████▌ ▐███████████▀ ▀██████████▌ ▐██████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ GROWING USE CASES . ▀▀▀▀▀▀▀▀ | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄████████▀ ▀████████▄ ▄████▀ ▄▄▄ ▀████▄ ▄█████ ███████████ █████▄ ████▀ ▄███████▀▀██▄ ▀████ ████ ████ ▀▀ ▄████ ████ ████▄ ▀███▄ ▄████▀ ▄████ ▀█████ ███████████ █████▀ ▀████▄ ▀▀▀ ▄████▀ ▀████████▄ ▄████████▀ ▀█████████████████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ EASE OF CRYPTO TRADING . ▀▀▀▀▀▀▀▀ | | | | ██████████
████████
██████
████
██████
████████
██████████ |
|
|
|
tysat
Legendary
Offline
Activity: 966
Merit: 1004
Keep it real
|
|
July 13, 2011, 01:30:43 AM |
|
I'm at work so can't test it out for myself...
But what mhash/s are you getting now, and with what settings?
|
|
|
|
Clavulanic
|
|
July 13, 2011, 02:52:03 AM |
|
for my 5830's... 1030/200 @ 1.2v 1020/200 @ 1.206v 100/200 @ 1.2v
They were at about 300mhash and now they are about 320mhash
I was able to bump up a 5850 to 400mhash too
|
|
|
|
██████████
████████
██████
████
██████
████████
██████████ | | | | | . Appreciate Coin | | | │ | Send and receive tokens in blogs and social media communities | │ | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄███▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀███▄ ▄████ ███ █████ ███ ████▄ ▄█████▄▄ ▄▄▄▄ ▄▄▄▄ ▄▄█████▄ ██████▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀██████ ██████ ███ █████ ███ ██████ ██████▄▄ ▄▄▄▄ ▄▄▄▄ ▄▄██████ ▀█████▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀█████▀ ▀████ ███ █████ ███ ████▀ ▀███▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄███▀ ▀█████████████████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ NO INFLATION . ▀▀▀▀▀▀▀▀ | | | | | ▄▄█████████▄▄ ▄███████▀▀▀███████▄ ▄████▀▀▀▀ ▄ ▀▀▀▀████▄ ▄████ ▄▄▄▄███▄▄▄▄ ████▄ ▄█████ ███████████ █████▄ ████▀ ▄██▀ ▀██▄ █████ ████ ████ ███ ████ ████ ████▄ ▀██▄ ▄██▀ █████ ▀█████ ███████████ █████▀ ▀████ ▀▀▀▀███▀▀▀▀ ████▀ ▀████▄▄▄▄ ▀ ▄▄▄▄████▀ ▀███████▄▄▄███████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ TECHNICAL INTEGRATIONS . ▀▀▀▀▀▀▀▀ | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄██████████▀██████████▄ ▄█████████▀ ▀█████████▄ ▄████████▀ ▀████████▄ █████████▄▄█▌ ▐█▄▄█████████ ████████████▌ ▐████████████ ████████████▌ ▐████████████ ▀███████████▌ ▐███████████▀ ▀██████████▌ ▐██████████▀ ▀█████████████████████▀ ▀█████████████████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ GROWING USE CASES . ▀▀▀▀▀▀▀▀ | | | ▄▄█████████▄▄ ▄█████████████████▄ ▄████████▀ ▀████████▄ ▄████▀ ▄▄▄ ▀████▄ ▄█████ ███████████ █████▄ ████▀ ▄███████▀▀██▄ ▀████ ████ ████ ▀▀ ▄████ ████ ████▄ ▀███▄ ▄████▀ ▄████ ▀█████ ███████████ █████▀ ▀████▄ ▀▀▀ ▄████▀ ▀████████▄ ▄████████▀ ▀█████████████████▀ ▀▀█████████▀▀ | ▀▀▀▀▀▀▀▀ EASE OF CRYPTO TRADING . ▀▀▀▀▀▀▀▀ | | | | ██████████
████████
██████
████
██████
████████
██████████ |
|
|
|
muyoso
Member
Offline
Activity: 84
Merit: 10
|
|
July 13, 2011, 04:14:57 AM |
|
1020mhz core 300mhz mem 1.163 v 325Mhash/s
My 5830 is a beast though. Before you bump up the voltage on these monsters, try with the stock voltage. Mine was able to overclock all the way to 1030mhz stable without changing voltage, but I wanted to keep it rock solid stable so I lowered it to 1020mhz.
|
I drink it up!
|
|
|
FreeJAC
Member
Offline
Activity: 112
Merit: 10
|
|
July 13, 2011, 05:14:41 AM |
|
This is great news thanks for sending that email. Love Trixx.
|
Donate here.... 18NiDLDA3qRxkEPN36xrzsdSgvEkbDKgNr
|
|
|
Leon
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 13, 2011, 06:38:59 AM |
|
Thanks for this!!
|
|
|
|
joulesbeef
Sr. Member
Offline
Activity: 476
Merit: 250
moOo
|
|
July 13, 2011, 06:55:20 AM |
|
I'd watch your power consumption when increasing the voltage. remember watts = v^2/r so it is exponential. you can actually end up losing more than you gain in power costs per coin. If power isnt a concern(er cost) than go for it, otherwise I would get something like kill-a-watt and make sure it is actually worth it for you to over volt. personally my card power requirement goes up 50% for the 10% gain in mh and that isnt worth it for me.
|
mooo for rent
|
|
|
nebiki
|
|
July 13, 2011, 01:24:32 PM |
|
I'd watch your power consumption when increasing the voltage. remember watts = v^2/r so it is exponential. you can actually end up losing more than you gain in power costs per coin. If power isnt a concern(er cost) than go for it, otherwise I would get something like kill-a-watt and make sure it is actually worth it for you to over volt. personally my card power requirement goes up 50% for the 10% gain in mh and that isnt worth it for me. that's very important to note. many miners use inefficient OC settings. they think more hashes per sec = better.
|
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4872
Merit: 4689
Leading Crypto Sports Betting & Casino Platform
|
|
July 13, 2011, 09:46:40 PM |
|
Anyone tried this on a 6870 yet? That card crashes when attempting to make changes with Afterburner in the special mode (used for underclocking memory to 300).
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
Bitcoin_Silver_Supply
|
|
July 14, 2011, 12:08:48 AM |
|
I emailed them with this a few weeks ago: I'm running two radeon 5830's however I have found no way to successfully modify voltage, clock or memory on both cards, just the first one...this is an extreme disadvantage since in MSI afterburner at least I can do both cards, but if I want to slightly modify voltage on both I have no way of doing so. Is there anything I can do to change both cards voltage and clocks using Trixx? This would help me a lot as I am able to overclock this card highly, I just need to be able to do it on both of them instead of just the first.
I went out and bought a crossfire connector but it still doesn't work on both cards even with crossfire enabled.
Today, I got a response that some of you might find exciting: Enjoy! Thank you.
|
|
|
|
EpicBacon
Member
Offline
Activity: 94
Merit: 10
|
|
July 14, 2011, 02:17:54 AM Last edit: July 14, 2011, 04:30:39 AM by EpicBacon |
|
WHAT THE HELL AM I READING? TRIXX ON MULTIPLE CARDS?
ASFDKJHGALHKF:DASLFJKHPO
brb using Trixx on my 13 GPU's
EDIT - Working flawlessly so far, I am now able to set my memory clock on every card to 300mhz (afterburner would cause my rigs to crash when i did this with 5830's)
|
|
|
|
bmgjet
Member
Offline
Activity: 98
Merit: 10
|
|
July 14, 2011, 03:06:15 AM |
|
Still doesn't allow voltage adjustment on my sapphire 6850
|
|
|
|
Leon
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 14, 2011, 05:36:18 AM |
|
WHAT THE HELL AM I READING? TRIXX ON MULTIPLE CARDS?
ASFDKJHGALHKF:DASLFJKHPO
brb using Trixx on my 13 GPU's
EDIT - Working flawlessly so far, I am now able to set my memory clock on every card to 300mhz (afterburner would cause my rigs to crash when i did this with 5830's)
lol
|
|
|
|
computerparts
|
|
July 14, 2011, 07:24:08 PM |
|
LOL seems there is some serious misconceptions on memory clock. FYI it only applies to idle, it goes back to stock at load.
|
|
|
|
OgNasty
Donator
Legendary
Offline
Activity: 4872
Merit: 4689
Leading Crypto Sports Betting & Casino Platform
|
|
July 15, 2011, 01:47:16 AM |
|
LOL seems there is some serious misconceptions on memory clock. FYI it only applies to idle, it goes back to stock at load.
I don't believe you are correct. My testing would indicate otherwise. Has anyone tested this on multiple 6870s?
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
phorensic
|
|
July 15, 2011, 06:28:36 AM |
|
zOMG the new Trixx works!! I've been waiting for this day for weeks! FWIW I had to disable the Synchronize cards in Multi-GPU config and use the drop-down menu to overvolt/overlock the cards independently.
|
|
|
|
|