MYMINER - Open Source Bitcoin mining ASIC project

[freeworm]

Update: No enough attention was attracted by this project in this forum. We are going to keep working on it privately.

[1715320669]

1715320669

[1715320669]

1715320669

[1715320669]

1715320669

[Unacceptable]

110nm   Your just a tad bit late with that 

Maybe if you were going to 28nm............MAYBE............need ALOT more info though,like who you are & where your located for starters 

Good luck 

[freeworm]

110nm   Your just a tad bit late with that 

Maybe if you were going to 28nm............MAYBE............need ALOT more info though,like who you are & where your located for starters 

Good luck 

Yes, we know that, but it's not so clear two months ago.
Fortunately the prototyping codes can be used for any feature size including 28nm.
It's better to have more than 1 core for smaller feature size, it's not difficult to add more cores

[cedivad]

It sounds really like an easy scam.
Edit, i propose myself to be an escrow for this, even if no one asked for that. You can look at my trust history. I will do it for free.

My address: 1LqNiZWiSriUwKoWxSpcmqWw6TzVSR9SAy
(if you trust me more than the OP, use it)

[freeworm]

It sounds really like an easy scam.
Edit, i propose myself to be an escrow for this, even if no one asked for that. You can look at my trust history. I will do it for free.

My address: 1LqNiZWiSriUwKoWxSpcmqWw6TzVSR9SAy
(if you trust me more than the OP, use it)

This is not a scam. we have uploaded the FPGA sof file for prototyping verification. Anyone who has De2 FPGA boards can verify it.
Thanks a lot for your proposal, but I have sent a PM to invite John (John K.) as an escrow.
We will let you or someone else to be the escrow if he refused.

[cedivad]

If you use a trusted escrow like John you have my full support for what you are doing.

[Beastlymac]

Looks promising. I would use John k as escrow

[Syke]

200BTC donation to compensate our previous work and to support us to continue

1, FPGA codes for the ASIC chips
2, FPGA codes for the controller
3, A python miner

You want a 200 BTC donation for some FPGA mining code???

[DyslexicZombei]

According to one of the GBCs I advocate for, ultibit, I understand that John K. has been tied up lately and very busy. They've been waiting days for service IIRC. I noticed recently that the GB forum needed escrow service redundancy and more prompt attention (IMHO), which is which I started my GB services. I offer a response time of 12-24 hours for official transactions, but usually around 4-6 hours. My niche is the Group Buys forum and pre-planning GBs so I guarantee I'll give you much more prompt and detailed support then any normal Escrow Service can possibly provide (since they have to serve the whole BTC economy/marketplace). I provide world class customer service support, education skills, and access to my 30 years of IT and advanced sales experience (I once sold and taught close up magic tricks as a teenager).

I would like to offer my escrow coordination services as well; I'm not an Escrow Repository but I can set up semi-automated sales for your fundraising at BTCrow for a 2% total fee. BTCrow offers low fees, Escrow Repository services as you build up your funding, refunds, manual release of funds by buying parties at the end of the fundraising effort, and even professional 3rd party dispute resolution for up to 120 days post-sales, which is something that could be important to potential backers.

I run a small miner co-op & I vet new Group Buy Coordinators and amateur miner hosts on the GB forum for free as a community service. I also advocate for both buyers and sellers. I've passed on 9.3 BTC on behalf of 3 different miners for HashFast Group Buy shares via John K.. In only about two weeks of my services being available: I have vetted (or am in the process of vetting) 5 different new or aspiring Group Buy Coordinators so far and multiple amateur miner hosts in several different states in my matchmaking index with super cheap electricty,

[freeworm]

If you use a trusted escrow like John you have my full support for what you are doing.

It seems that John K. is very busy now. we haven't got any reply from him. Is there any other well-known escrow we can trust?

[eve]

According to one of the GBCs I advocate for, ultibit, I understand that John K. has been tied up lately and very busy. They've been waiting days for service IIRC. I noticed recently that the GB forum needed escrow service redundancy and more prompt attention (IMHO), which is which I started my GB services. I offer a response time of 12-24 hours for official transactions, but usually around 4-6 hours. My niche is the Group Buys forum and pre-planning GBs so I guarantee I'll give you much more prompt and detailed support then any normal Escrow Service can possibly provide (since they have to serve the whole BTC economy/marketplace). I provide world class customer service support, education skills, and access to my 30 years of IT and advanced sales experience (I once sold and taught close up magic tricks as a teenager).

I would like to offer my escrow coordination services as well; I'm not an Escrow Repository but I can set up semi-automated sales for your fundraising at BTCrow for a 2% total fee. BTCrow offers low fees, Escrow Repository services as you build up your funding, refunds, manual release of funds by buying parties at the end of the fundraising effort, and even professional 3rd party dispute resolution for up to 120 days post-sales, which is something that could be important to potential backers.

I run a small miner co-op & I vet new Group Buy Coordinators and amateur miner hosts on the GB forum for free as a community service. I also advocate for both buyers and sellers. I've passed on 9.3 BTC on behalf of 3 different miners for HashFast Group Buy shares via John K.. In only about two weeks of my services being available: I have vetted (or am in the process of vetting) 5 different new or aspiring Group Buy Coordinators so far and multiple amateur miner hosts in several different states in my matchmaking index with super cheap electricty,

This Guy look very scammy to me, trying to self promote to be an Escrow Guy. A Scammer promoting himself what a joke. This whole thing looks very suspicious to me. What Guarantee Do they have? Another x-crowd, Abidi?

[DyslexicZombei]

According to one of the GBCs I advocate for, ultibit, I understand that John K. has been tied up lately and very busy. They've been waiting days for service IIRC. I noticed recently that the GB forum needed escrow service redundancy and more prompt attention (IMHO), which is which I started my GB services. I offer a response time of 12-24 hours for official transactions, but usually around 4-6 hours. My niche is the Group Buys forum and pre-planning GBs so I guarantee I'll give you much more prompt and detailed support then any normal Escrow Service can possibly provide (since they have to serve the whole BTC economy/marketplace). I provide world class customer service support, education skills, and access to my 30 years of IT and advanced sales experience (I once sold and taught close up magic tricks as a teenager).

I would like to offer my escrow coordination services as well; I'm not an Escrow Repository but I can set up semi-automated sales for your fundraising at BTCrow for a 2% total fee. BTCrow offers low fees, Escrow Repository services as you build up your funding, refunds, manual release of funds by buying parties at the end of the fundraising effort, and even professional 3rd party dispute resolution for up to 120 days post-sales, which is something that could be important to potential backers.

I run a small miner co-op & I vet new Group Buy Coordinators and amateur miner hosts on the GB forum for free as a community service. I also advocate for both buyers and sellers. I've passed on 9.3 BTC on behalf of 3 different miners for HashFast Group Buy shares via John K.. In only about two weeks of my services being available: I have vetted (or am in the process of vetting) 5 different new or aspiring Group Buy Coordinators so far and multiple amateur miner hosts in several different states in my matchmaking index with super cheap electricty,

This Guy look very scammy to me, trying to self promote to be an Escrow Guy. A Scammer promoting himself what a joke. This whole thing looks very suspicious to me. What Guarantee Do they have? Another x-crowd, Abidi?

Screw you eve! Go fuck yourself. Pretty much everyone laughs at you here. Your worth to the community is zilch. Go back to the Group Buys forum & see what I've contributed to the top post there compared to you. How many endorsements do you have on ebay? I've got a 162 perfect feedback rating as a co-seller/buyer over 10 years.

How many endorsements do you have on this forum. I have 5 so far, and I've vetted bobsag3 and BeepBeep2 as Group Buy Coordinators for free. I also have three new GBCs I'm in the process of vetting and multiple people here have trusted me with their IDs & even BTC with good reason & nothing fucking happened you fucking barney kook. Here's 4 shares worth 6.2 BTC where nothing fucking happened except what was supposed to happen:

https://blockchain.info/tx/0ffc32767e5fc6138fdca9c509cd1f711a105d0c57298072f60162cf6d0fe937

Here's why you should trust me: https://bitcointalk.org/index.php?topic=276947.msg2956448#msg2956448
Here's my endorsements: https://bitcointalk.org/index.php?topic=280412.msg2997877#msg2997877

Why should we trust YOU eve. You POS. Where's your endorsements? You should take your accusation down since it's fucking groundless.

What you just accused me of: That's libel or defamation.

[Unacceptable]

According to one of the GBCs I advocate for, ultibit, I understand that John K. has been tied up lately and very busy. They've been waiting days for service IIRC. I noticed recently that the GB forum needed escrow service redundancy and more prompt attention (IMHO), which is which I started my GB services. I offer a response time of 12-24 hours for official transactions, but usually around 4-6 hours. My niche is the Group Buys forum and pre-planning GBs so I guarantee I'll give you much more prompt and detailed support then any normal Escrow Service can possibly provide (since they have to serve the whole BTC economy/marketplace). I provide world class customer service support, education skills, and access to my 30 years of IT and advanced sales experience (I once sold and taught close up magic tricks as a teenager).

I would like to offer my escrow coordination services as well; I'm not an Escrow Repository but I can set up semi-automated sales for your fundraising at BTCrow for a 2% total fee. BTCrow offers low fees, Escrow Repository services as you build up your funding, refunds, manual release of funds by buying parties at the end of the fundraising effort, and even professional 3rd party dispute resolution for up to 120 days post-sales, which is something that could be important to potential backers.

I run a small miner co-op & I vet new Group Buy Coordinators and amateur miner hosts on the GB forum for free as a community service. I also advocate for both buyers and sellers. I've passed on 9.3 BTC on behalf of 3 different miners for HashFast Group Buy shares via John K.. In only about two weeks of my services being available: I have vetted (or am in the process of vetting) 5 different new or aspiring Group Buy Coordinators so far and multiple amateur miner hosts in several different states in my matchmaking index with super cheap electricty,

This Guy look very scammy to me, trying to self promote to be an Escrow Guy. A Scammer promoting himself what a joke. This whole thing looks very suspicious to me. What Guarantee Do they have? Another x-crowd, Abidi?

Screw you eve! Go fuck yourself. Go back to the Group Buys forum & see what I've contributed to the top post there compared to you. How many endorsements do you have on ebay? I've got a 162 perfect feedback rating as a co-seller/buyer.

How many endorsements do you have on this forum. I have 5 so far, and I've vetted bobsag3 and BeepBeep2 as Group Buy Coordinators for free. I also have three new GBCs I'm in the process of vetting and people have trusted me with their IDs & even BTC with good reason & nothing fucking happened you fucking barney kook I'd run over if I saw you in the water. Here's 4 shares worth 6.2 BTC where nothing fucking happened except what was supposed to happen:

https://blockchain.info/tx/0ffc32767e5fc6138fdca9c509cd1f711a105d0c57298072f60162cf6d0fe937

Here's why you should trust me: https://bitcointalk.org/index.php?topic=276947.msg2956448#msg2956448
Here's my endorsements: https://bitcointalk.org/index.php?topic=280412.msg2997877#msg2997877

Why should we trust YOU eve. You POS. Where's your f'n endorsements?

   Easy man,your gonna blow a gasket   We all know eve,see his/her ignore glowing  

[eve]

What a guy with those attitude and personality would someone let him escrow?

[DyslexicZombei]

eve just got me in a bad mood. I'm usually patient with his outbursts but he's never attacked me personally before. Some jerk new GBC tried to include me in his price fixing cabal: https://bitcointalk.org/index.php?topic=288656.0

Sorry eve. But I still reported you to the mods for libel/defamation. There's free speech but you cannot go around throwing those serious accusations without proof. I've listed my proof. Where's your proof, kook?

[DyslexicZombei]

Sorry Unacceptable. You're right. Must be time for a snickers bar I suppose.

Guess I'll just need to use my first ignore.

===

Sorry for the thread hijack freeworm. Don't mind my thread outburst. I've put a lot of time/effort into starting my services & to have someone call me a scammer without a single shred of proof when I've been completely aboveboard with my dealings with people's IDs, cash, and BTC & have gone out of my way to help newbies and forum members, just rankles me after the day I had. Like I mentioned: the actual escrow depository services & 3rd party dispute resolution is handled by BTCrow. I'm an official BTCrow Escrow *Affiliate* and not an Agent. The offer still stands.
 
I can also mention dabs as an escrow service that's avail. He runs an actual MSB service in the PI. SebastianJu is also a standup guy.

[cedivad]

200BTC donation to compensate our previous work and to support us to continue

1, FPGA codes for the ASIC chips
2, FPGA codes for the controller
3, A python miner

You want a 200 BTC donation for some FPGA mining code???

This is what i also don't understand. However i don't understand nothing about designing an asic chip, so i must be wrong.
Trusted escrow, that will do it for free? I don't know any of it.

[Unacceptable]

Sorry Unacceptable. You're right. Must be time for a snickers bar I suppose.

Guess I'll just need to use my first ignore.

===

Sorry for the thread hijack freeworm. Don't mind my thread outburst. I've put a lot of time/effort into starting my services & to have someone call me a scammer without a single shred of proof when I've been completely aboveboard with my dealings with people's IDs, cash, and BTC & have gone out of my way to help newbies and forum members, just rankles me after the day I had. Like I mentioned: the actual escrow depository services & 3rd party dispute resolution is handled by BTCrow. I'm an official BTCrow Escrow *Affiliate* and not an Agent. The offer still stands.
 
I can also mention dabs as an escrow service that's avail. He runs an actual MSB service in the PI. SebastianJu is also a standup guy.

   No worries man,we all snap from time to time   

I ignore no one,I just consider the source & move on 

If your a scammer,it will show soon enough (look at pirateat40,he is soooo screwed now that BTC is "currency"  ),if your not,it too will show 

Back on topic: I'll be watching & waiting for results to prove that this is legit & works & is affordable.

All these ASIC guys want big money,not much for us poor folk to chose from......................

[freeworm]

200BTC donation to compensate our previous work and to support us to continue

1, FPGA codes for the ASIC chips
2, FPGA codes for the controller
3, A python miner

You want a 200 BTC donation for some FPGA mining code???

This is what i also don't understand. However i don't understand nothing about designing an asic chip, so i must be wrong.
Trusted escrow, that will do it for free? I don't know any of it.

From our experience, the most difficult part of starting a bitcoin mining ASIC chip is the prototyping design on FPGA.
One team needs at least one FPGA expert, one ASIC expert and one Bitcoin mining algorithm expert to finish it.
It usually takes 2 to 6 months. Avalon, BTCGuarden, and labcoin are all the examples.

labcoin collected 7,000 BTC from its IPO when they just finished the FPGA prototyping for the 150nm chip.
BTCGuarden collected ~10,000 BTC from its IPO when they claimed they were going to tape-out their chip.

We also collected 3,000 BTC from MYMINER IPO while we even didn't mention we had the ASIC prototyping almost done.

Since we have already finished this ASIC prototyping part, it will save people a lot time who want to tape-out the real chip.

Anyone who gets the source codes of our ASIC prototyping can generate a netlist file and send this file to an IC design company or person for IC layout design.

Layout usually takes 15-30 days. Once it's finished, one can send the layout to the fab for tape-out.

Usually the IC company can do the layout and arrange the tape-out for you together as a package service as long as you can provide the netlist file and pay them.
The only thing you need to worry about is the ASIC prototyping while we have already done it for you.

[freeworm]

John K. haven't given any response until now. We need to find a new well known escrow. If somebody knows, please advice.