[CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less

[helipotte]

Bought some more. 

Helipotte; 1.75; BEx50+hub 16AP5qJH6urahX5KxvMTySFM6oGhjSkXWe

Transaction ID: 19d0f0543eb7cdb93d742a57252ea180e1649759d3009b562484e55d95d69e26

Thanks! 

Canary, could you send different colors? Last order was 30 black and 20 red.  If you have them.

[CanaryInTheMine]

Bought some more.  

Helipotte; 1.75; BEx50+hub 16AP5qJH6urahX5KxvMTySFM6oGhjSkXWe

Transaction ID: 19d0f0543eb7cdb93d742a57252ea180e1649759d3009b562484e55d95d69e26

Thanks!  

Canary, could you send different colors? Last order was 30 black and 20 red.  If you have them.

Sure!  please add a note to your email about this please so that I can record it on the label printout as instructions for packing.
Thanks!

[Krellan]

Not sure if this text is still needed, but:

Krellan; 100; 3.5; 12JXrgup9NJdwp5rWqnqXJ57RN4hYHY8i6

[bitterdog]

Any hub packages left?

[philipma1957]

Making today's last run to USPS in 30

canary, any word on the cube price and specs?

If rumors pan out than it would be about 3x the spec of a blade and overclockable in software?  There's no other info. As usual, friedcat will make his post/announcement on forums for all to see.

I found a little more info  :

 2 btc
30-38gh
 120 watts  

there is a site in Canada taking pre orders..



http://www.wtcr.ca/catalog/product/bm-ambec-01

and a German thread mentions 120 watts.  My German is not that good so the 120 watts may be an error.

the german thread

https://bitcointalk.org/index.php?topic=245990.msg3465116#msg3465116

  and in reading it again the 120 watts may be wrong


I have to say that a 2btc cube that is usb plug n play and is 30-38gh will sell.  Even if it is more like 220 watts vs 120 watts.

[Chronikka]

Anyone looking for 50 blades + plz PM me.

Canary sounds like you have some blades to sell  With the cube coming out soon would you be willing to discount an order of 10 blades?

[MikeMike]

Coinbase is getting too expensive to buy BTC in USA.
Anyone know of a cheaper Alternative?

[rpg]

Making today's last run to USPS in 30

canary, any word on the cube price and specs?

If rumors pan out than it would be about 3x the spec of a blade and overclockable in software?  There's no other info. As usual, friedcat will make his post/announcement on forums for all to see.

I found a little more info  :

 2 btc
30-38gh
 120 watts  

there is a site in Canada taking pre orders..



http://www.wtcr.ca/catalog/product/bm-ambec-01

and a German thread mentions 120 watts.  My German is not that good so the 120 watts may be an error.

the german thread

https://bitcointalk.org/index.php?topic=245990.msg3465116#msg3465116

  and in reading it again the 120 watts may be wrong


I have to say that a 2btc cube that is usb plug n play and is 30-38gh will sell.  Even if it is more like 220 watts vs 120 watts.

its already for sale on ebay, although very expensive, 3 blades are cheaper. Going forward anything over $10/GH is not worth it, next diff is already at 505 and growing.  http://www.ebay.com/itm/NEW-CUBE-ASICMiner-30GH-s-to-38GH-s-not-block-erupter-blade-asic-BTC-fpga-gpu-/200983367706?pt=LH_DefaultDomain_0&hash=item2ecb8ad01a

[philipma1957]

I got a third hub today. It is up and running .  I was able to get 3 hubs to run on my asus maximus V gene motherboard .

 I am running  121 sticks on bitminter total of 41gh.  

 It is very hard to load all those sticks.   Kind of fun to push limits on one pc.  I believe I will get up to 135 sticks on the 3x  49 port hubs.


  YOU CAN'T DO THIS WITHOUT  A PCIE  CARD WITH USB 2.0 PORTS  


 THIS  low cost one allowed me to run  2 hubs with 85 sticks.


http://www.amazon.com/gp/product/B0026I4DZ2/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1  


 I believe this card can run                 3x         49 hubs with about 120 sticks. >>>>>>  must be under the  127  devices per limit.

 I believe the mobo's  usb ports can run 3x 49 port hubs with about 120 sticks. >>>>>>> must be under the the 127 devices per port limit

This means I could do about 240 sticks on this setup.

photos later.

[Chronikka]

 It is very hard to load all those sticks.   Kind of fun to push limits on one pc.  I believe I will get up to 135 sticks on the 3x  49 port hubs.

It is fun isn't it? I'm using computer PSU's to power things I never thought I would lol. And my computer looks like Frankenstein with things plugged in all over the place.

I do have a question for you though. How easy do you think it would be to wire a 5v PSU into an ATX connector for these hubs. And do you think it would actually work? A PSU like this for example:

http://www.circuitspecialists.com/hf300w-s-5.html

I think you see where I am going with this...2 hubs on 1 PSU...

[xyzzy099]

I believe the mobo's  usb ports can run 3x 49 port hubs with about 120 sticks. >>>>>>> must be under the the 127 devices per port limit

Just for the sake of clarity, the limit of 127 devices is per host controller, not per port.

I don't know for sure how many host controllers are on that main board, but I believe there are 3 of them, not counting any added PCI cards.

[xzempt]

anyone have a tutorial on how to set up the backplane with atx psu?    my backplane just came in, and my server power supply wont be here til thursday

[sbfree]

sbfree; 3 x USB/HUB KITS; 5.25; 215a54f0c167b0a2136cc1f92eea59ec76f9862229aa4211804944c8689fb51d


canary, can you tell me the shipping requirement for these 3, and I will send label asap. I just could not find any info. on that, sorry.
sbfree

[camolist]

[]http://i42.tinypic.com/2i9qw74.jpg[/img]
mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice

quick update...not sure what changes i made (moved a bunch of cables around...pretty much) but all 57 are now hashing and powered by the 30amp 5volt (along with a usb wifi card)  and some 12v miners. power supply is a champ!

pulled one of the usb miners out today. was looking over stats on bfgminer had 1.7% HW errors with 1.1% of it being from one USB that was running a 50 % error rate - will check this chip out on a different computer but seems to be the chip :/
two blades plugged in and hashing 165 watts according to the killawatt
think i need to add a second fan to each blade
(edit: dare i say these blades are also champs? one 80mm low speed/noise fan each just barely warm to the touch and "22.5 minutes   20.98 Gh/s")
http://eligius.st/~wizkid057/newstats/userstats.php/192BdwAewJLtjBVnH8FGvsceUACjwXvLeK
[]http://i43.tinypic.com/ka5h5l.jpg[/img]

and second set of blades are up and running.

thanks for the 3 smooth transactions. roughly 60GH added to the network to replace my old 3200mh fpga setup

[rpg]

 It is very hard to load all those sticks.   Kind of fun to push limits on one pc.  I believe I will get up to 135 sticks on the 3x  49 port hubs.

It is fun isn't it? I'm using computer PSU's to power things I never thought I would lol. And my computer looks like Frankenstein with things plugged in all over the place.

I do have a question for you though. How easy do you think it would be to wire a 5v PSU into an ATX connector for these hubs. And do you think it would actually work? A PSU like this for example:

http://www.circuitspecialists.com/hf300w-s-5.html

I think you see where I am going with this...2 hubs on 1 PSU...

just screw in the wires. remember red is positive, black negative. But you can buy 1/2 that price on ebay

[CanaryInTheMine]

[]http://i42.tinypic.com/2i9qw74.jpg[/img]
mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice

quick update...not sure what changes i made (moved a bunch of cables around...pretty much) but all 57 are now hashing and powered by the 30amp 5volt (along with a usb wifi card)  and some 12v miners. power supply is a champ!

pulled one of the usb miners out today. was looking over stats on bfgminer had 1.7% HW errors with 1.1% of it being from one USB that was running a 50 % error rate - will check this chip out on a different computer but seems to be the chip :/
two blades plugged in and hashing 165 watts according to the killawatt
think i need to add a second fan to each blade
(edit: dare i say these blades are also champs? one 80mm low speed/noise fan each just barely warm to the touch and "22.5 minutes   20.98 Gh/s")
http://eligius.st/~wizkid057/newstats/userstats.php/192BdwAewJLtjBVnH8FGvsceUACjwXvLeK
[]http://i43.tinypic.com/ka5h5l.jpg[/img]

and second set of blades are up and running.

thanks for the 3 smooth transactions. roughly 60GH added to the network to replace my old 3200mh fpga setup

You're Welcome!!

[CanaryInTheMine]

WARNING! Limited # of Hubs remain...

[agibby5]

WARNING! Limited # of Hubs remain...

Buy, buy, buy!

[MikeMike]

WARNING! Limited # of Hubs remain...

has the price come down with BTC on the go?

[xzempt]

WARNING! Limited # of Hubs remain...

out of bitcoins for now