juggalodarkclow
Legendary
Offline
Activity: 980
Merit: 1000
|
|
December 18, 2013, 11:44:35 AM |
|
Finally got my cube from SSB today. After about an hour of setting up/troubleshooting I got it running at 32Gh/s right now and it's only been running for less than 20 minutes. Thanks again SSB and when I can afford another one I'll be back PS: Only a few of my heatsink screws were loose so I tightened them but a big concern was the sticker on the fan went flying into the boards with force so I'd recommend taking off the sticker before running to avoid that issue. Happy mining everyone! EDIT: One of my boards is all x's now. I reseated all of the boards but still get it. Any ideas or should I just wait for repair/warranty info? Any customers of mine can chime in to help out. I would also ask around in the forums as many people here are very helpful. I would try turning power off and on several times as that sometimes help. I am able to send individual boards I have taken out of the cube miners to replace faulty ones if necessary. This way you can mine with what is working instead of having to ship whole cube back to me for replacement. Please PM me if you need help in making this right. I will take care of you. SSB I've reseated the boards, tightened heatsinks, hit the reset button a few times, as well as disconnected and reconnected the power and still have all x's on one board. If you're able to swap a board I'll probably go that route. Today I'll run it with 1 board, then 2 boards, then 3, etc.. until I can pinpoint exactly which one it is that's being a problem. Thanks SSB, you're a fantastic reseller and an asset to the community!
|
|
|
|
Miner_2049er
Newbie
Offline
Activity: 32
Merit: 0
|
|
December 18, 2013, 02:40:37 PM |
|
SSB:
Just sent .75btc for a Cube: Transaction: ef262e79b0ae3ca5a04f452f0043116ee04fcdd6ae448e7515ec8ae54539b994
I will send you an Express Mail shipping label as soon as I sign off here.
Thanks! Mark
|
|
|
|
vnhyp0
Member
Offline
Activity: 106
Merit: 10
|
|
December 18, 2013, 04:04:26 PM |
|
Sent an order with details for more cubes. Thanks again for the great service SSB!
|
QQ: 2228207157
|
|
|
whiteshadow
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 18, 2013, 04:22:06 PM |
|
ordered a cube thanks
|
|
|
|
vnhyp0
Member
Offline
Activity: 106
Merit: 10
|
|
December 18, 2013, 05:00:00 PM |
|
Finally got my cube from SSB today. After about an hour of setting up/troubleshooting I got it running at 32Gh/s right now and it's only been running for less than 20 minutes. Thanks again SSB and when I can afford another one I'll be back PS: Only a few of my heatsink screws were loose so I tightened them but a big concern was the sticker on the fan went flying into the boards with force so I'd recommend taking off the sticker before running to avoid that issue. Happy mining everyone! EDIT: One of my boards is all x's now. I reseated all of the boards but still get it. Any ideas or should I just wait for repair/warranty info? Any customers of mine can chime in to help out. I would also ask around in the forums as many people here are very helpful. I would try turning power off and on several times as that sometimes help. I am able to send individual boards I have taken out of the cube miners to replace faulty ones if necessary. This way you can mine with what is working instead of having to ship whole cube back to me for replacement. Please PM me if you need help in making this right. I will take care of you. SSB I've reseated the boards, tightened heatsinks, hit the reset button a few times, as well as disconnected and reconnected the power and still have all x's on one board. If you're able to swap a board I'll probably go that route. Today I'll run it with 1 board, then 2 boards, then 3, etc.. until I can pinpoint exactly which one it is that's being a problem. Thanks SSB, you're a fantastic reseller and an asset to the community! I have had a few boards get a few boards that are half or full X's and have taken them out completely from the unit so it does not reconnect every 2 minutes. One way that has fixed the X's has been changing the clock to high and back to low. Some boards will have 0's on low and X's on high; I was able to group the boards that would work on high clock setting and the ones that worked on low (i.e. showed all 0's) into separate cubes. I then just ran the boards on low that had X's when set to high, and set all the others to high. Hope this helps some. To avoid this if you haven't opened yours yet: Take the 4 screws off the front and pull the boards out carefully. Make sure each board has all 4 screws in snug on the heatsink (several of mine were loose), and make sure each card/heatsink is seated completely in the socket (a few of mine were not fully seated after inspection). The sticker on the front of the fan flew off of 3/4 of mine within 10 minutes of running and stuck to a board inside, so I recommend trying to get it off if it is easy to do (else you might have to later after it gets sucked in). Then, Carefully, slide the boards back into the case along the grooves, plug the fan back in, and screw the 4 screws back on, making sure the entire time to watch the LED lights and other fragile stuff around the edges of the card (ethernet, usb, power input, etc.) THEN plug it in after all that and start mining (Don't forget the fuse!). I bought 4 and didn't do a through check on them all, and each had some minor issues. The last I've gotten I have checked like this and had zero problems. Hope this helps stops any headaches before they begin. It may seem a bit overkill, but it only takes a small bit of time to save a big headache!
|
QQ: 2228207157
|
|
|
DrunkenSailor
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 18, 2013, 07:10:07 PM |
|
My cube just arrived and is happily hashing away. Thanks SSB!
|
|
|
|
twib2
Sr. Member
Offline
Activity: 280
Merit: 250
Helperizer
|
|
December 18, 2013, 07:33:28 PM |
|
Sent BTC for a cube, thanks!
TxID: 6f3a96647147698f1c9d7278c4ddf2b036a127b3c8cf2e400a152a6264569270
Will send you the shipping label soon.
Thanks much! - Tye
|
|
|
|
xzempt
|
|
December 18, 2013, 11:58:25 PM |
|
has anyone put a cube on a killawatt meter? mine has smoked 2 600w PSU's in 2 days.... wtf
|
|
|
|
philipma1957
Legendary
Online
Activity: 4158
Merit: 8057
'The right to privacy matters'
|
|
December 19, 2013, 12:02:16 AM |
|
has anyone put a cube on a killawatt meter? mine has smoked 2 600w PSU's in 2 days.... wtf not sure, but i was under the impression it was under 400 watts
|
|
|
|
xzempt
|
|
December 19, 2013, 12:23:59 AM |
|
has anyone put a cube on a killawatt meter? mine has smoked 2 600w PSU's in 2 days.... wtf not sure, but i was under the impression it was under 400 watts thats my thoughts.... idk if this one is malfuntioning and pulling too much or what.....
|
|
|
|
hayseed
|
|
December 19, 2013, 01:23:41 AM |
|
has anyone put a cube on a killawatt meter? mine has smoked 2 600w PSU's in 2 days.... wtf not sure, but i was under the impression it was under 400 watts thats my thoughts.... idk if this one is malfuntioning and pulling too much or what..... Don't have one yet, but I remember this posting: https://bitcointalk.org/index.php?topic=334747.20slow clock at 230 watts, high clock at 324 watts Wasn't there a torchwood series where black cubes showed up and they where offing people in the end ?Nope, Doctor Who http://en.wikipedia.org/wiki/The_Power_of_Three_(Doctor_Who)
|
|
|
|
colemab
Newbie
Offline
Activity: 54
Merit: 0
|
|
December 19, 2013, 02:01:34 AM |
|
I run two cubes (both in high clock mode) with a Corsair CX750M. I have 2 more cubes on order and a 2nd CX750M waiting on them. I got mine at my local best buy on sale for $79.99 (See link above).
|
|
|
|
philipma1957
Legendary
Online
Activity: 4158
Merit: 8057
'The right to privacy matters'
|
|
December 19, 2013, 03:33:40 AM |
|
12/18/13 I have received some CUBE miners with more set to arrive in the coming days. All orders received so far will ship by Friday if not sooner. I still have cubes available in stock for shipping by Friday at the latest. Orders are shipped in the order I receive them and are paid for. I no longer have any BLADE miners for sale. I still have a limited amount of backplanes available and the 49 PORT USB hubs are still available. Please give me positive trust feedback if you are happy with my customer service. Thank you for your continued support! SSB
Any shipping updates? I would like to know if the 4 I ordered shipped. I have some more customers looking to buy. 2 or 3 more. thanks.
|
|
|
|
spartan82
|
|
December 19, 2013, 03:34:51 AM |
|
these still available?
|
|
|
|
sidehack
Legendary
Offline
Activity: 3346
Merit: 1858
Curmudgeonly hardware guy
|
|
December 19, 2013, 04:19:57 AM |
|
has anyone put a cube on a killawatt meter? mine has smoked 2 600w PSU's in 2 days.... wtf What was the rail output rated for, that you had them running off of? Should be at least 30A; these come with 30A fuses so ought not pull more than that. I started out running one off a 500W server supply, but have had two running off a 750W supply (62A 12V) for a couple weeks with only one incident that I believe was a cooling insufficiency.
|
|
|
|
babaji.ca
|
|
December 19, 2013, 04:36:29 AM |
|
these still available?
go have a look at post # 1 for the latest status on availability (looks like it to me)
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
|
December 19, 2013, 05:11:22 AM |
|
has anyone put a cube on a killawatt meter? mine has smoked 2 600w PSU's in 2 days.... wtf Low=230W; High=340 at the wall (120VAC) measured with a Kill A Watt. That means it's drawing 195.5WDC and 289WDC respectively from a PSU that's performing at 85% efficiency at such particular load.
|
|
|
|
SilentSonicBoom (OP)
|
|
December 19, 2013, 06:42:01 AM |
|
12/19/13 I am out of cubes. Cubes that shipped 12/18 will receive a pm in the next 8 hours. If you have provided shipping labels, please watch your tracking numbers to see when they have shipped. Any orders not confirmed/and/or shipped yet will be confirmed in the next 24 hours and will ship Thursday or Friday. I am changing the payment address for all new orders of any of my products to 14wUQTiS2ZqfXptbiKTEWjRxxkdKUQfNai . I am taking PREORDERS for cubes at the same pricing as before below for shipping on Friday 12/27/13 and/or Saturday 12/28/13. If I don't ship by these dates for some reason, I will gladly refund your bitcoin. All orders are shipped in the order they are received/paid. I may receive the cubes sooner and will ship earlier if I get them earlier. No orders will ship on Christmas day 12/25/13 and Thursday 12/26/13.
All cube orders please pay attention to the following by forum member vnhyp0 .
I have had a few boards get a few boards that are half or full X's and have taken them out completely from the unit so it does not reconnect every 2 minutes. One way that has fixed the X's has been changing the clock to high and back to low. Some boards will have 0's on low and X's on high; I was able to group the boards that would work on high clock setting and the ones that worked on low (i.e. showed all 0's) into separate cubes. I then just ran the boards on low that had X's when set to high, and set all the others to high. Hope this helps some.
To avoid this if you haven't opened yours yet: Take the 4 screws off the front and pull the boards out carefully. Make sure each board has all 4 screws in snug on the heatsink (several of mine were loose), and make sure each card/heatsink is seated completely in the socket (a few of mine were not fully seated after inspection). The sticker on the front of the fan flew off of 3/4 of mine within 10 minutes of running and stuck to a board inside, so I recommend trying to get it off if it is easy to do (else you might have to later after it gets sucked in). Then, Carefully, slide the boards back into the case along the grooves, plug the fan back in, and screw the 4 screws back on, making sure the entire time to watch the LED lights and other fragile stuff around the edges of the card (ethernet, usb, power input, etc.) THEN plug it in after all that and start mining (Don't forget the fuse!).
I bought 4 and didn't do a through check on them all, and each had some minor issues. The last I've gotten I have checked like this and had zero problems. Hope this helps stops any headaches before they begin. It may seem a bit overkill, but it only takes a small bit of time to save a big headache!
|
|
|
|
r00t$
Member
Offline
Activity: 117
Merit: 10
|
|
December 19, 2013, 03:12:43 PM |
|
I have one board that has a row of 6 x's, and another board with 1 x in the same cube.
When I see the chips has gone tango uniform, I've had success with changing to low clock, rebooting, changing back to high clock, and rebooting.
This will usually fix the x's on the 2 boards, but needs to be done at least every 24 hours. Or be happy running at less than 100%.
Also, I want to thank SSB for working with me on getting a cube swapped out. I had one that absolutely refused to run at high clock... it would give me all x's. Great service SSB!
|
|
|
|
mudge
Member
Offline
Activity: 92
Merit: 10
|
|
December 19, 2013, 04:23:58 PM |
|
I realy wish you sent to the UK
0.75+20% inport +20% vat comes out to 1.08 BTC
We are charged 1.2 + P&P
We do get ripped off over here
|
|
|
|
|