[ANN] [MARKS] Incentivize Content Creators & Build a Reputation Value Framework

[dbkeys]

https://drkmrk.xyz      

plz help

The pool says it's in testing mode, and the link for payouts indicates no income since June 16.  

I tested it via nicehash.com:

Code:

Notice: Pool verificator may not be 100% accurate and may report pool being compatible while in fact it is not compatible or vice versa. Always discuss with pool operator if you encounter any issues with the pool verificator.

Pool host: drkmrk.xyz
Pool port: 3333
Pool user: bPXWF6Sa7b6xFhfZLC69W7yrTJKxMTx5mp
Pool pass: x
Algorithm: CryptoNightV7

Resolving pool host drkmrk.xyz... OK
Establishing connection with proxy... OK
Establishing connection with pool 94.23.33.83:3333... OK
Sending login... OK
Receiving login response... Error: Read timed out
Your pool is shown as incompatible therefore we encourage you to contact pool operator to make sure that the pool is using minimal/starting pool share difficulty which is compatible with our service (and thus compatible with today's miners), please send them following link: https://www.nicehash.com/help/which-mining-pools-are-supported. Thank you!

Close

I think the pool is temporarily off-line.  I sent a message to @onelineproof (pool op) to see if he can help.

[holylacross]

Installed the new wallet today and had no issue. Thank you for the update

[dbkeys]

Installed the new wallet today and had no issue. Thank you for the update

Thanks for the feedback !  Are you on Linux, Windows or MacOS ??

[crackfoo]

how do we set the default algo instead of scrypt?

I tried, like the other multi-algo coins, using algo= in the conf but no joy...

[psycodad]

how do we set the default algo instead of scrypt?

I tried, like the other multi-algo coins, using algo= in the conf but no joy...

From a quick grep through src I would say miningalgo=, see https://github.com/project-bitmark/bitmark/blob/master/src/miner.cpp#L120

HTH

[crackfoo]

how do we set the default algo instead of scrypt?

I tried, like the other multi-algo coins, using algo= in the conf but no joy...

From a quick grep through src I would say miningalgo=, see https://github.com/project-bitmark/bitmark/blob/master/src/miner.cpp#L120

HTH

ahh thanks! guess I shouldn't have been so lazy

[crackfoo]

how do we set the default algo instead of scrypt?

I tried, like the other multi-algo coins, using algo= in the conf but no joy...

From a quick grep through src I would say miningalgo=, see https://github.com/project-bitmark/bitmark/blob/master/src/miner.cpp#L120

HTH

ahh thanks! guess I shouldn't have been so lazy

hrmm seems not working in .conf nor command line....

[dbkeys]

how do we set the default algo instead of scrypt?

I tried, like the other multi-algo coins, using algo= in the conf but no joy...

You can switch it "manually" from the command-line too, if needed. For example:

Code:

coins@dubuntu:/blockchains/BTM$ marks setminingalgo 4
coins@dubuntu:/blockchains/BTM$ marks gmi
{
    "blocks" : 461596,
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "reward_next" : 15.00000000,
    "reward_max" : 13.73529376,
    "hashrate_4max_reward" : 35000000000,
    "difficulty" : 2674.24478854,
    "errors" : "",
    "genproclimit" : 12,
    "networkhashps" : 234706330857046.28125000,
    "pooledtx" : 0,
    "testnet" : false,
    "generate" : true,
    "algo" : 4,
    "algoname" : "X17",
    "hashespersec" : 140982
}
coins@dubuntu:/blockchains/BTM$ marks setminingalgo 3; marks gmi
{
    "blocks" : 461596,
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "reward_next" : 15.00000000,
    "reward_max" : 13.73529376,
    "hashrate_4max_reward" : 35000000000,
    "difficulty" : 2674.24478854,
    "errors" : "",
    "genproclimit" : 12,
    "networkhashps" : 234706330857046.28125000,
    "pooledtx" : 0,
    "testnet" : false,
    "generate" : true,
    "algo" : 3,
    "algoname" : "ARGON2",
    "hashespersec" : 205696
}
coins@dubuntu:/blockchains/BTM$ 

Note: bitmark-cli is aliased to 'marks' here, and I'm using the abbreviation 'gmi' for getmininginfo  ...

This is an example bitmark.conf file for an Argon2d mining setup:

Code:

server=1
daemon=1
listen=1
maxconnections=1024
disablewallet=1
miningalgo=3
blocknotify=/home/coins/bitmark_push.sh

rpcuser=bitmark.rpc
rpcpassword=<Mak834CatnhJ2882s33l12lal4>
rpcport=15629
port=9265
rpcthreads=20
keypool=4096


addnode=108.163.197.58
addnode=139.162.128.92
addnode=139.162.35.170
addnode=173.255.252.140
addnode=178.238.224.213
addnode=35.177.220.199
addnode=45.33.65.161
addnode=72.220.130.97
addnode=78.70.227.72
addnode=98.115.147.74

Note the wallet is disabled above (to service miners more speedily) and that the mining algorithm is being set:

Code:

miningalgo=3

Sorry for the little discrepancies and standards differences, and many thanks for pointing them out.
I'll have the next release in the 0.9.7 series have better parsing and respond to 'algo' as well.

[dbkeys]

how do we set the default algo instead of scrypt?

I tried, like the other multi-algo coins, using algo= in the conf but no joy...

From a quick grep through src I would say miningalgo=, see https://github.com/project-bitmark/bitmark/blob/master/src/miner.cpp#L120

HTH

ahh thanks! guess I shouldn't have been so lazy

hrmm seems not working in .conf nor command line....

Sure you're on the lastest code from master branch ?

Code:

git checkout master

      Also, some of the suggested improvements are implemented in the dev branch, which will become release 0.9.7.1,  if you want to be on the "cutting edge"  

Code:

git checkout dev

     For example, position of pow_algo_id & pow_algo (formerly algonumber & algo) and difficulties are presented more explicitly, in the 'getmininginfo' (or 'gmi') and the 'chaindynamics' (or 'cd') commands.

(Branch 0.9.7 has been merged into master @ the fork, and I retained it just for historical records, perhaps it will be best to delete it ?)

[Jeronimo99]

Perhaps you are better off dealing with issues of normal listing? How much can you drive people by the nose like donkeys? You create an agiotage near an empty bucket! Does this play into your hands? you are afraid of real work on the stock exchange because you will pour this coin on your head down to 1 sat? you're just a bunch of pathetic clowns.

[dbkeys]

Perhaps you are better off dealing with issues of normal listing? How much can you drive people by the nose like donkeys? You create an agiotage near an empty bucket! Does this play into your hands? you are afraid of real work on the stock exchange because you will pour this coin on your head down to 1 sat? you're just a bunch of pathetic clowns.

If you have abilities in this area, (Exchanges) specific, constructive criticism (what can be done, in your view) would be better, or even actual help (Do it ! )   ... we're mostly an all-volunteer group, most of us interested in the potential of blockchain marking technology, and we each do what we can.  

We have added two Exchanges recently, (Cryptopia.co.nz and qTrade.io) and we're in contact with them.

qTrade is a new exchange, and is in beta, but MARKS trading is already fully functional on it.

Cryptopia is having issues syncing our blockchain, but we have yet AFAIK to get confirmation they are in fact on  v0.9.7.0 or later.

[Jeronimo99]

What did you do? This is ridiculous! cryptopy produces the message "13th June - Investigating deposit issues." and all the others also do not work, qtrade - does not cause any trust at all - what are your problems in this and why they are not solved? Where is the promised yobit - you even got money for this, and what?

[dbkeys]

What did you do? This is ridiculous! cryptopia produces the message "13th June - Investigating deposit issues." and all the others also do not work, qtrade - does not cause any trust at all - what are your problems in this and why they are not solved? Where is the promised yobit - you even got money for this, and what?

Poloniex has been advised AFAIK that we have forked and that the forked blockchain is functioning correctly. @82ndabnmedic is in contact with them and we hope to have the deposit/withdrawal situation finally resolved soon.

Cryptopia, as I mentioned, is experiencing blockchain sync issue, and we're working with them to solve it.

qTrade is being developed by one of the contributors and member of the Bitmark team (@bitbumper on Slack), so I trust qTrade.io. Curious what you think qTrade can do to increase their perceived trustability.

Yobit: Indeed, we paid Yobit and they have not done anything (so far, anyway).  I'll submit the listing again !

Support Ticket at Yobit.io:

2018-04-27 12:02:00 dbkeys
If you are not going to add Bitmark (MARKS) then will you please return the funds payed towards this.

2018-04-25 11:23:19 dbkeys
Hello, Can you please tell us if you will be adding Bitmark (MARKS)
We payed via Yobicode.   We have been recently added by Cryptopia
( https://www.cryptopia.co.nz/Exchange/?market=MARKS_BTC) and are already listed at Poloniex.

2018-03-27 03:21:23 dbkeys
OK, thank you.  I have activated the yobicode.
2018-03-22 11:29:48 dbkeys
Hello, Can you give us an update about the Bitmark listing ?
It's about the 7-14 day timeframe you mentioned. If there is any issue, we would like the opportunity to address. it

Best Regards,
DBKeys
2018-03-13 12:47:25 dominikherzog
If coin is not listed/after 7-14 business days/>request is declined
You can activate yobicode for yourself on https://yobit.net/en/yobicodes/
 0.001 btc
BTC

2018-03-13 12:37:02 dbkeys
Hello,

We paid 0.1 to list Bitmark ( https://www.bitmark.io ) with the ticker symbol MARKS. (We have been using the ticker symbol BTM, but we have decided to change to MARKS)

If you need any additional information, or an initial deposit of Bitmarks (MARKS) please let me know.

Best Regards,
DBKeys

Deposit towards YoBit Bitmark Listing:

       ~/.bitcoin$ btc sendtoaddress 3GuWcTZFD6avnosbMXdq7dZgTUxkCPkErN 0.02
        0f59e2718cf2bc22afda407964721c98138d58d67e7c49304edb08b9418ecf88
        1520260616 - Mon 5 Mar 14:36:56 UTC 2018

        ~/.bitcoin$ btc sendtoaddress 1AhqJ7AGFMZmcCgD9wr3TqPgwPL5YWPrAY 0.075
        508a2ce4290f45c191dd604476e66935b33d3c56b2caa5bed649f8d390681def
        1520434228 - Wed 7 Mar 14:50:28 UTC 2018

[dbkeys]

If you take a look at CoinMarketCap's Market tab for Bitmark (MARKS) you can see that they list TradebyTrade.com as the top volume exchange for Bitmark.

Bitmark Markets

#   Source   Pair   Volume (24h)   Price   Volume (%)   Updated
1   Trade By TradeTrade By Trade   BTM/BTC   $51,388   * $0.312863   61.42%   Recently
2   Trade By TradeTrade By Trade   BTM/USDT   $22,047   * $0.146719   26.35%   Recently
3   CryptopiaCryptopia   MARKS/BTC   $5,220   $0.269226   6.24%   Recently
4   PoloniexPoloniex   BTM/BTC   $4,924   * $0.309068   5.88%   Recently
5   Trade SatoshiTrade Satoshi   BTM/BTC   $90   $0.183605   0.11%   Recently
6   CryptopiaCryptopia   MARKS/LTC   $3   $0.211024   0.00%   Recently
7   Trade SatoshiTrade Satoshi   BTM/LTC   $0   $0.347605   0.00%   Recently

[holylacross]

Installed the new wallet today and had no issue. Thank you for the update

Thanks for the feedback !  Are you on Linux, Windows or MacOS ??

Windows 10 64x

[dbkeys]

Bitmark (MARKS) - Pooled Mining UPDATE:

  

 SmilingMining.com  now offers EquiHash, Yescrypt and X17 pooled mining, as well as SCrypt, SHA256d & Lyra2REv2

Bitmark (MARKS) Pooled Mining

               
                              SCrypt   SHA256d   Yescrypt   Argon2d   X17    Lyra2REv2  EquiHash   CryptoNight
http://www.smilingmining.com     √        √         √                  √         √         √

https://mp3.markmine.io          √        √                     √      √         √

https://drkmrk.xyz                                                                                     X

http://yapool.net                √

http://zpool.ca                  √        √                            √

Notes:

     (X) CryptoNight is on the drkmrk.xyz pool on an experimental basis.
 
     EH: There was a recent sharp rise in EquiHash performance, if you know which pool / source this is coming from, please PM or post.

[82ndabnmedic]

What did you do? This is ridiculous! cryptopy produces the message "13th June - Investigating deposit issues." and all the others also do not work, qtrade - does not cause any trust at all - what are your problems in this and why they are not solved? Where is the promised yobit - you even got money for this, and what?

As @dbkeys stated we are a volunteer group, fully decentralized and organically grown.

I've been in contact with both Cryptopia & Poloniex at least twice a week. Poloniex is currently doing their standard testing prior to re-enabling the wallet. Additionally we are collaborating with Cryptopia and assisting them in getting their wallets synced... they are policy bound and unable to use the bootstrap file to Aid Syncing.

We successfully forked and provided our community the 1st multi-algo merge mineable currency, this was a massive undertaking and we have been largely sucessfull... let's try to keep the conversation productive, constructive and insightful

[kendie]

how too solo on my wallet for GPU?
how too set something?

[coinzy4]

    EH: There was a recent sharp rise in EquiHash performance, if you know which pool / source this is coming from, please PM or post.

It is coming from http://www.smilingmining.com. They said on discord they are testing it now, and it should be available for miners soon.
It is been a couple of days since, maybe they just decided to mine equihash only for themselves.

[dbkeys]

    EH: There was a recent sharp rise in EquiHash performance, if you know which pool / source this is coming from, please PM or post.

It is coming from http://www.SmilingMining.com. They said on discord they are testing it now, and it should be available for miners soon.
It is been a couple of days since, maybe they just decided to mine equihash only for themselves.

¡ Good job SmilingMining.com  !   .... & thanks for the info @coinzy4  

EquiHash went up an order of magnitude...


                                Bitmark 8mPoW - Blockchain Performance Graphs