sgminer: Baikal Giant X10 / N / B - Open Source - Confirmed OC Giant B!

[oricon]

How to install and compile?
use SSH and log in as root user to your miner, default password is baikal.
cd ~
sudo apt-get install git
git clone https://github.com/cod3gen/sgminer-baikal.git
cd sgminer-baikal
nano driver-baikal.h DO CHANGES AS ABOVE. If you have Giant N, no need to do changes.
autoreconf -fi && ./configure && make
cp /opt/scripta/bin/sgminer /opt/scripta/bin/sgminer_ORG
This process will take about 15min.

When its done you need to:

screen -x sgminer
ctrl+c to stop screen session
cp sgminer /opt/scripta/bin/sgminer Confirm overwrite. If you cannot overwrite, you need to stop screen session again and retry copy.
After a while you can reconnect to screen session(screen -x sgminer). When you do not need to see screen session any more, use ctrl+a+d keys to dettach!

do you done step above with bold blue color?

i try
but unsuccess

[1714605313]

1714605313

[1714605313]

1714605313

[1714605313]

1714605313

[1714605313]

1714605313

[Dudukian]

Does anyone have any experience with Baikal repair service ?   Four of my Baikal's went down from an electrical storm .  Three are Giant B and 1 Giant X .  Is it worth the effort to repair them ?    I know the shipping will be steep .

     Thanks ,  James

[tboy32c]

Does anyone have any experience with Baikal repair service ?   Four of my Baikal's went down from an electrical storm .  Three are Giant B and 1 Giant X .  Is it worth the effort to repair them ?    I know the shipping will be steep .

     Thanks ,  James

If you have any others you could try swapping a known good Orange Pi/controller board with one of the ones that don't work. If only the Orange Pi or controller board died you're in luck since those are easy to replace (Baikal sells them separately if you contact them). If the hash boards died you may not be able to repair them depending on if the ASICs themselves fried of if it was any of the other components.

[chinalovebtc]

We are committed to the Baikal machine cracking, we have been studying the firmware for a long time, and have made some progress. If a friend wants to join our research team, we are very welcome to contact us.

Discord: greatwallbtc#5210

[ZenoDiac]

Does anyone have any experience with Baikal repair service ?   Four of my Baikal's went down from an electrical storm .  Three are Giant B and 1 Giant X .  Is it worth the effort to repair them ?    I know the shipping will be steep .

     Thanks ,  James

Yea it depends on what's wrong hey.
If they go on, but don't hash and you can't access the Dashboard, but can ping it = you need to take the SD card out and give it a set IP.
If they go on, but don't hash and you can't access the Dashboard and can NOT ping it = you need to reflash the SD card or replace it with a new one.
If they go on and all 3 lights light up during startup you might be in luck - boards are fine and the problem lies elsewhere.
If they go on, but no blue lights light up during startup - there's something wrong with the board.

I'm currently sitting with one hash board which I cannot get to work for the life of me. I've fixed a few but this one... Disassembled, cleaned, went through it with a magnifying glass, applied new heatpaste.
I just can't get the blue light to go on during startup. It goes solid when the other 2 boards hash (tho itself doesn't hash).

If they don't go on at all... Something is most likely fried - should be able to see it when disassembling.
Eh, but it's a pain in the arse to send back with fees - and with the current profitability, I donno if it's worth the money sending back :/

[piccolobit]

Hello everyone, I would like to try to change my Baikal n, but I did not understand how it is done. is there a tutorial? the procedure can be done with windows or serves linux?
THX

[Dudukian]

Does anyone have any experience with Baikal repair service ?   Four of my Baikal's went down from an electrical storm .  Three are Giant B and 1 Giant X .  Is it worth the effort to repair them ?    I know the shipping will be steep .

     Thanks ,  James

Yea it depends on what's wrong hey.
If they go on, but don't hash and you can't access the Dashboard, but can ping it = you need to take the SD card out and give it a set IP.
If they go on, but don't hash and you can't access the Dashboard and can NOT ping it = you need to reflash the SD card or replace it with a new one.
If they go on and all 3 lights light up during startup you might be in luck - boards are fine and the problem lies elsewhere.
If they go on, but no blue lights light up during startup - there's something wrong with the board.

I'm currently sitting with one hash board which I cannot get to work for the life of me. I've fixed a few but this one... Disassembled, cleaned, went through it with a magnifying glass, applied new heatpaste.
I just can't get the blue light to go on during startup. It goes solid when the other 2 boards hash (tho itself doesn't hash).

If they don't go on at all... Something is most likely fried - should be able to see it when disassembling.
Eh, but it's a pain in the arse to send back with fees - and with the current profitability, I donno if it's worth the money sending back :/

  All the lights come on during startup.   They just don't show up on the gateway . 

[stokmak]

https://www.youtube.com/watch?v=HIR0bAYKiyc

[sean123]

https://www.youtube.com/channel/UCMF53Qxd1_1FQiPPFzpLfPA?app=desktop

[agapes]

there is one way we can trust for the guy that firmware is legit
give access to his computer on TeamViewer and showing the screen live that working

[agapes]

iv saw something weird on all videos, the browser connected to VPN???
is that normal or what?

[Bob-Bit]

Anyone know where I could source a fan for a Baikal A900? Can't find the same one anywhere. I don't mind if I have to splice wires with the end of the plug for the old fan. I'm a simple man.

[sean123]

Hi all is there any new on the n range update many thanks in advance

[kavjlaeg]

Rebuild of Baikal`s SG Miner for Giant X10 / N / B

hello code3gen, make your sgminer mod on 7pc baikal B
sorry, hashrate MMR and working pools, some as stock.
in web LBRY up from 42 to 46 Gh/s
pools NO hash up (
https://www.miningrigrentals.com/rigs/88361
I mod by code3gen baikal`s B at 30 Jul


thks.

[TheRealCashen]

Followed the directions and i'm getting 0 accepted shares with pascal, but Lbry works just fine.

any ideas?

[jaryfaaad]

Have updated the link and that might be useful to some people.

[cod3gen]

hello code3gen, make your sgminer mod on 7pc baikal B
sorry, hashrate MMR and working pools, some as stock.
in web LBRY up from 42 to 46 Gh/s
pools NO hash up (
https://www.miningrigrentals.com/rigs/88361
I mod by code3gen baikal`s B at 30 Jul


thks.

Not sure what you mean, i see very fluctating hashrate on your miners on MRR..

[cod3gen]

hello cod3gen

I bought bk-n240

Browse
https://github.com/cod3gen/sgminer-baikal
Follow the steps written on the website to rebuild

use root

sudo apt-get install git
git clone https://github.com/cod3gen/sgminer-baikal.git
cd sgminer-baikal
autoreconf -fi && ./configure && make
cp /opt/scripta/bin/sgminer /opt/scripta/bin/sgminer_ORG
cp sgminer /opt/scripta/bin/sgminer


When executing sgminer

The message that appears is

Started sgminer 5.6.2-BK_cod3gen_MOD
* using Jansson 2.7
No devices detected!
Waiting for USB hotplug devices or press q to quit

Is my step missing

Have never been tried on 240k version, and from your message it does not work on it "No devices detected"

[piccolobit]

hi, my giant N+ change clock from 200 to 420....but hashrate is the same....is normal?
THX

[sean123]

https://github.com/genesismining/sgminer-gm/commit/0015387e466632dc4eb6c49b3431f3c9313d1edf