BitBurner Fury IN STOCK MAJOR PRICE CUT SOLD OUT!

[chr0me]

I have it. It works after i shutdown the PC / Fury completely... After cold start it works!

With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...

Shouldn't that be 64? 32 for one board. Are you using the newest cgminer?

34 gh for a board of 50gh?

He's using the standard values. I'm getting around 45~52gh/s with 45:282


Is anyone getting any errors with --butburner-fury-options? cgminer doesn't even start when I use that.

[1714134553]

1714134553

[1714134553]

1714134553

[1714134553]

1714134553

[3ds]

I have it. It works after i shutdown the PC / Fury completely... After cold start it works!

With 115200:2:10:50:256 i get 34GH... Wondering because 2 is to low. I only used this for testing...

Shouldn't that be 64? 32 for one board. Are you using the newest cgminer?

IMHO it should be 16 for a single board. From cgminer ASIC-README.txt:

For BitBurner X and BitBurner XX devices you should use twice the number of
boards in the stack.  e.g. for a two-board stack you would use 4.  For
BitBurner Fury devices you should use the total number of BitFury chips in the
stack (i.e. 16 times the number of boards).  e.g. for a two-board stack you
would use 32.

I tested 2, 16, 32 and 64... I get always around 30GH/s 

[chr0me]

I tested 2, 16, 32 and 64... I get always around 30GH/s  

Well, of course. you need to change 50:256.

Code:

example timeout values / clock frequencies:
45:282
47:270
50:256 (default)

I'm using 47:270


Anyone know what an acceptable HW rate is for Furys?

[QualitySeeds]

Where are u located and can i pick them up instead of paying customs

[Thyatis]

how quick do they get into america?

[3ds]

with 115200:16:10:47:270 i get ~26GH/s
with 115200:32:10:47:270 i get ~28GH/s
with 115200:16:10:45:282 i get ~28GH/s

So it seems that it is equal which --bitburner-fury-options i used...  ?
should i use --avalon-options ?

btw. what's with --avalon-auto

[dego]

Got my boards today. Ordered yesterday. 

[jelin1984]

HASHING SPEED?

[dego]

with 115200:16:10:47:270 i get ~26GH/s
with 115200:32:10:47:270 i get ~28GH/s
with 115200:16:10:45:282 i get ~28GH/s

So it seems that it is equal which --bitburner-fury-options i used...  ?
should i use --avalon-options ?

btw. what's with --avalon-auto

Until now I had one board running at 50Ghs with this line:


cgminer --usb 1:18 --disable-gpu --avalon-options 115200:32:10:d:274 --bitburner-fury-voltage 1070


the --usb option sets the USB Bus and device....

It is one board so 32 is right...

[dego]

HASHING SPEED?

Will see, could not connect em yet... will update you asap...

[jelin1984]

What drivers must install for windows cgminer run?

[3ds]

cgminer --usb 1:18 --disable-gpu --avalon-options 115200:32:10:d:274 --bitburner-fury-voltage 1070

results in ~28GH/s...

Use only --avalon-auto gives me ~28GH/s...

It seems that every changes i made results in round about 30GH/s... So i think no of my options will be really used 

I use cgminer v3.8.2
It it a known bug?


btw. if i turn on the debug mode (press [D]isplay and [D]ebug) i see this messages often: Get avalon read got err 0 sometimes: invalid nonce

[3ds]

It seems that every changes i made results in round about 30GH/s... So i think no of my options will be really used 

I use cgminer v3.8.2

I have downgrade to 3.7.2 and to 3.6.6...

What should i say... It stays at ~28GH/s

So, have i got a defect board?

Btw. I had observed that there was some dust to the black cooler. So i think my board must run more than for a simple test...

[jelin1984]

why hashing at 30gh
when the seller tell 50gh?

[jermwerty]

how quick do they get into america?

Ordered Monday scheduled for delivery to US West coast by 10.30am Wed.

3 days is pretty good!

[dego]

Are you cooling your board properly? Mine sits in a garage where its around 10 degrees and 2 x 12mm fans are working...

And what kind of pool are you mining on?

What kind of psu do you use?

[koullis]

Well BTC/USD is out of control right now. Just nuts.

I'd suggest you price the miners in USD/Euro instead.

+1

everyone should put prices to USD/Euro since the high rise of btc exchange

[cixelsyddyslexic]

Well BTC/USD is out of control right now. Just nuts.

I'd suggest you price the miners in USD/Euro instead.

+1

everyone should put prices to USD/Euro since the high rise of btc exchange

Pretty sure that's one of the perks (for them) of putting prices in BTC. Just saying

[ace2000]

+1 for USD/euros

[crazyearner]

Price needs to be changed in terms of BTC price.