pusttiu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 02, 2019, 12:03:56 PM Last edit: September 03, 2019, 02:05:14 AM by frodocooper |
|
Hy everyone I have a A741 and last week the source and the power cable is burnout . the all 6 pci-e are burnout on the Avalon, but the Bitmain source is ok. After i put the A741 on the power in the controler board is see : not any device. I don't have an AUC3 to replaced, i don't have any board to tested. The led is RED on the board on back miner, on the PMU board the led is Green (on the PCI-e power.) 2 led on the side . pls help. No smel , no burnout component on boards, all it is ok visual. http://www.99poze.ro/Avalon_/
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 02, 2019, 06:12:17 PM |
|
I think that you have a burnt and dead pmu board.
|
|
|
|
pusttiu
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2019, 10:24:08 AM |
|
Hy. on the AUC3 the one led is Blue , and the small led is Green.(whith no power on the miner) , in the OnenWrt -CGminer stats no device show on Avalon Devices.
With power on the miner, on the MM board led Is red, on the board with power conector pci-e the led are Green. 2led for 1 board, and 2 led for the ather board.
How is show on CGminer stats (Avalon Devices ) whit miner connect on AUC3 with no power on the miner?/.? ?
|
|
|
|
goose72
Newbie
Offline
Activity: 26
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 05, 2019, 02:57:07 AM |
|
Looking for a replacement fan for an Avalon 741, would prefer a way better fan if possible.
Thanks for the help.
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 05, 2019, 09:47:01 AM |
|
@goose72 Delta QFR1212GHE is a good fan and quite widely available. Also, if you have looked at my guide, I have a long list for replacement fans ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
goose72
Newbie
Offline
Activity: 26
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 08, 2019, 05:58:11 PM |
|
Thanks HagssFIN
Guides are great really appreciate them.
|
|
|
|
BitcoinIntern
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2019, 01:58:16 AM |
|
Is there a way to overclock the Avalon miners?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8442
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2019, 02:14:08 AM |
|
Is there a way to overclock the Avalon miners?
yes a bit on the a921 a841 a741 a721 the newest a1047 has low speed and high speed
|
|
|
|
BitcoinIntern
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2019, 02:33:03 AM Last edit: September 21, 2019, 10:17:43 AM by frodocooper |
|
I meant more so like the S9's how people are overclocking to 17.7 TH and so on. Anyway to do that on this brand of miner?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8442
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2019, 02:42:34 AM Last edit: September 21, 2019, 10:17:58 AM by frodocooper |
|
some were overclocked with liquid cooling. I read steve of avalon/canaan talking about that.
|
|
|
|
elfarto69
Newbie
Offline
Activity: 12
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 03, 2020, 03:47:39 PM |
|
Is there any reason why an 841 will not get listed in the CGMiner Status Page, we don't see any red lights on it but the miner is not there, other miners down the 5 miner chain are there. Even when put alone won't work We have changed AUC Dongle/5V Power brick/USB Cable to no avail. Looks like something is wrong with the miner itself, Any ideas on how to troubleshoot this ?
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3738
Merit: 2666
Evil beware: We have waffles!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 03, 2020, 04:05:27 PM |
|
Are all miners on the controller the same type? Must be all 841's. Maybe the others are 821's? You cannot mix them on 1 controller. As for troubleshooting - um, you *did* look at page-1 here right? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
elfarto69
Newbie
Offline
Activity: 12
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 03, 2020, 04:10:57 PM |
|
Are all miners on the controller the same type? Must be all 841's. Maybe the others are 821's? You cannot mix them on 1 controller. As for troubleshooting - um, you *did* look at page-1 here right? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Yep, they are all 841s , and yes, i read through the troubleshooting guide. I'll add additional details later i want to run cgminer with the -D (debug) switch to see what comes up
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 03, 2020, 04:53:40 PM |
|
@elfarto69
Can you try it with another MM board? (Eg. from a working condition A841)
This would be to see if the MM board is faulty.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4228
Merit: 8442
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 03, 2020, 05:08:21 PM |
|
try just 1 unit on the chain the 'bad' one see if it finds it.
when you get to chains of 5 sometimes 1 drops out.
|
|
|
|
elfarto69
Newbie
Offline
Activity: 12
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 07, 2020, 03:30:17 PM Last edit: September 08, 2020, 02:11:55 AM by frodocooper Merited by frodocooper (2) |
|
Yep, they are all 841s , and yes, i read through the troubleshooting guide. I'll add additional details later i want to run cgminer with the -D (debug) switch to see what comes up
Here is the output i get from running cgminer manually under an ssh session with the -D switch (debug), as you can see there are a lot of " Unknown response" and " Failed AUC xfer data with err -1" messages. [2020-09-07 15:24:04.576] Started cgminer 4.10.0 [2020-09-07 15:24:04.577] RES: thread starting [2020-09-07 15:24:04.577] USB scan devices: checking for AV8 devices [2020-09-07 15:24:04.743] AV8 looking for and found AV8 29f1:33f2 [2020-09-07 15:24:04.744] USB lock avalon8 1-25 [2020-09-07 15:24:04.744] RES: avalon8 (1:25) lock=1 [2020-09-07 15:24:04.744] USB res lock avalon8 1-25 [2020-09-07 15:24:04.744] RES: avalon8 (1:25) lock ok=1 [2020-09-07 15:24:04.798] USB init - AV8 device 1:25 usbver=0200 prod='USB2IIC Converter' manuf='CANAAN' serial='20141122' [2020-09-07 15:24:04.999] AV8-0: AUC usb_read -7, 0! [2020-09-07 15:24:04.999] 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:04.999] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.000] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.000] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.017] 00000000 10 00 00 00 41 55 43 2d 32 30 31 35 31 32 30 38 |....AUC-20151208| [2020-09-07 15:24:05.017] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.017] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.017] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.018] AV8-0: USB2IIC Converter version: AUC-20151208! [2020-09-07 15:24:05.018] AV8-0: Found at 1:25 [2020-09-07 15:24:05.018] AV8-0: AVA8_P_DETECT ID[1] [2020-09-07 15:24:05.028] AV8-0-0: Unknown response 40 [2020-09-07 15:24:05.028] AV8-0: Module detect ID[1]: 64 [2020-09-07 15:24:05.028] AV8-0: New module detected! ID[1-e7] [2020-09-07 15:24:05.234] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:05.234] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.234] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.235] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:05.435] AV8-0: AVA8_P_DETECT ID[2] [2020-09-07 15:24:05.444] AV8-0-0: Unknown response 40 [2020-09-07 15:24:05.445] AV8-0: Module detect ID[2]: 64 [2020-09-07 15:24:05.445] AV8-0: New module detected! ID[2-9f] [2020-09-07 15:24:05.650] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:05.650] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.651] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:05.651] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:05.851] AV8-0: AVA8_P_DETECT ID[3] [2020-09-07 15:24:05.861] AV8-0-0: Unknown response 40 [2020-09-07 15:24:05.861] AV8-0: Module detect ID[3]: 64 [2020-09-07 15:24:05.861] AV8-0: New module detected! ID[3-f5] [2020-09-07 15:24:06.067] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:06.067] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:06.067] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:06.067] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:06.268] AV8-0: AVA8_P_DETECT ID[4] [2020-09-07 15:24:06.277] AV8-0-0: Unknown response 40 [2020-09-07 15:24:06.278] AV8-0: Module detect ID[4]: 64 [2020-09-07 15:24:06.278] AV8-0: New module detected! ID[4-24] [2020-09-07 15:24:06.483] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:06.483] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:06.484] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:06.484] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:06.684] AV8-0: AVA8_P_DETECT ID[5] [2020-09-07 15:24:06.694] AV8-0-0: Unknown response 40 [2020-09-07 15:24:06.694] AV8-0: Module detect ID[5]: 64 [2020-09-07 15:24:06.694] AV8-0: New module detected! ID[5-ee] [2020-09-07 15:24:06.900] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:06.900] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:06.900] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:06.900] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:07.101] AV8-0: AVA8_P_DETECT ID[6] [2020-09-07 15:24:07.306] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:07.306] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.307] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.307] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:07.307] AV8-0: AVA8_P_DETECT: Failed AUC xfer data with err -1 [2020-09-07 15:24:07.308] AV8 looking for and found AV8 29f1:33f2 [2020-09-07 15:24:07.308] USB lock avalon8 1-24 [2020-09-07 15:24:07.308] RES: avalon8 (1:24) lock=1 [2020-09-07 15:24:07.308] USB res lock avalon8 1-24 [2020-09-07 15:24:07.308] RES: avalon8 (1:24) lock ok=1 [2020-09-07 15:24:07.363] USB init - AV8 device 1:24 usbver=0200 prod='USB2IIC Converter' manuf='CANAAN' serial='20141122' [2020-09-07 15:24:07.563] AV8-0: AUC usb_read -7, 0! [2020-09-07 15:24:07.564] 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.564] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.564] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.564] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.582] 00000000 10 00 00 00 41 55 43 2d 32 30 31 35 31 32 30 38 |....AUC-20151208| [2020-09-07 15:24:07.583] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.583] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.583] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.583] AV8-0: USB2IIC Converter version: AUC-20151208! [2020-09-07 15:24:07.584] AV8-0: Found at 1:24 [2020-09-07 15:24:07.584] AV8-0: AVA8_P_DETECT ID[1] [2020-09-07 15:24:07.594] AV8-0-0: Unknown response 40 [2020-09-07 15:24:07.594] AV8-0: Module detect ID[1]: 64 [2020-09-07 15:24:07.594] AV8-0: New module detected! ID[1-b3] [2020-09-07 15:24:07.799] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:07.800] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.800] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:07.800] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:08.001] AV8-0: AVA8_P_DETECT ID[2] [2020-09-07 15:24:08.010] AV8-0-0: Unknown response 40 [2020-09-07 15:24:08.010] AV8-0: Module detect ID[2]: 64 [2020-09-07 15:24:08.010] AV8-0: New module detected! ID[2-ad] [2020-09-07 15:24:08.215] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:08.215] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:08.215] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:08.216] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:08.416] AV8-0: AVA8_P_DETECT ID[3] [2020-09-07 15:24:08.425] AV8-0-0: Unknown response 40 [2020-09-07 15:24:08.425] AV8-0: Module detect ID[3]: 64 [2020-09-07 15:24:08.425] AV8-0: New module detected! ID[3-30] [2020-09-07 15:24:08.630] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:08.631] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:08.631] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:08.631] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:08.831] AV8-0: AVA8_P_DETECT ID[4] [2020-09-07 15:24:08.840] AV8-0-0: Unknown response 40 [2020-09-07 15:24:08.840] AV8-0: Module detect ID[4]: 64 [2020-09-07 15:24:08.840] AV8-0: New module detected! ID[4-8c] [2020-09-07 15:24:09.046] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:09.046] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.046] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.046] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:09.246] AV8-0: AVA8_P_DETECT ID[5] [2020-09-07 15:24:09.451] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:09.451] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.451] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.452] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:09.452] AV8-0: AVA8_P_DETECT: Failed AUC xfer data with err -1 [2020-09-07 15:24:09.452] AV8 looking for and found AV8 29f1:33f2 [2020-09-07 15:24:09.452] USB lock avalon8 1-23 [2020-09-07 15:24:09.453] RES: avalon8 (1:23) lock=1 [2020-09-07 15:24:09.453] USB res lock avalon8 1-23 [2020-09-07 15:24:09.453] RES: avalon8 (1:23) lock ok=1 [2020-09-07 15:24:09.508] USB init - AV8 device 1:23 usbver=0200 prod='USB2IIC Converter' manuf='CANAAN' serial='20141122' [2020-09-07 15:24:09.708] AV8-0: AUC usb_read -7, 0! [2020-09-07 15:24:09.708] 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.708] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.708] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.708] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.727] 00000000 10 00 00 00 41 55 43 2d 32 30 31 35 31 32 30 38 |....AUC-20151208| [2020-09-07 15:24:09.727] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.727] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.727] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.727] AV8-0: USB2IIC Converter version: AUC-20151208! [2020-09-07 15:24:09.727] AV8-0: Found at 1:23 [2020-09-07 15:24:09.727] AV8-0: AVA8_P_DETECT ID[1] [2020-09-07 15:24:09.737] AV8-0-0: Unknown response 40 [2020-09-07 15:24:09.737] AV8-0: Module detect ID[1]: 64 [2020-09-07 15:24:09.737] AV8-0: New module detected! ID[1-86] [2020-09-07 15:24:09.942] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:09.942] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.942] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:09.942] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:10.143] AV8-0: AVA8_P_DETECT ID[2] [2020-09-07 15:24:10.152] AV8-0-0: Unknown response 40 [2020-09-07 15:24:10.152] AV8-0: Module detect ID[2]: 64 [2020-09-07 15:24:10.152] AV8-0: New module detected! ID[2-a0] [2020-09-07 15:24:10.357] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:10.357] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:10.357] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:10.358] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:10.558] AV8-0: AVA8_P_DETECT ID[3] [2020-09-07 15:24:10.567] AV8-0-0: Unknown response 40 [2020-09-07 15:24:10.567] AV8-0: Module detect ID[3]: 64 [2020-09-07 15:24:10.567] AV8-0: New module detected! ID[3-d3] [2020-09-07 15:24:10.772] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:10.773] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:10.773] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:10.773] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:10.973] AV8-0: AVA8_P_DETECT ID[4] [2020-09-07 15:24:10.982] AV8-0-0: Unknown response 40 [2020-09-07 15:24:10.982] AV8-0: Module detect ID[4]: 64 [2020-09-07 15:24:10.983] AV8-0: New module detected! ID[4-3d] [2020-09-07 15:24:11.188] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:11.188] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.188] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.188] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:11.388] AV8-0: AVA8_P_DETECT ID[5] [2020-09-07 15:24:11.593] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:11.593] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.594] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.594] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:11.594] AV8-0: AVA8_P_DETECT: Failed AUC xfer data with err -1 [2020-09-07 15:24:11.594] AV8 looking for and found AV8 29f1:33f2 [2020-09-07 15:24:11.594] USB lock avalon8 1-22 [2020-09-07 15:24:11.594] RES: avalon8 (1:22) lock=1 [2020-09-07 15:24:11.595] USB res lock avalon8 1-22 [2020-09-07 15:24:11.595] RES: avalon8 (1:22) lock ok=1 [2020-09-07 15:24:11.650] USB init - AV8 device 1:22 usbver=0200 prod='USB2IIC Converter' manuf='CANAAN' serial='20141122' [2020-09-07 15:24:11.850] AV8-0: AUC usb_read -7, 0! [2020-09-07 15:24:11.850] 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.850] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.850] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.850] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.867] 00000000 10 00 00 00 41 55 43 2d 32 30 31 35 31 32 30 38 |....AUC-20151208| [2020-09-07 15:24:11.867] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.867] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.867] 00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:11.867] AV8-0: USB2IIC Converter version: AUC-20151208! [2020-09-07 15:24:11.868] AV8-0: Found at 1:22 [2020-09-07 15:24:11.868] AV8-0: AVA8_P_DETECT ID[1] [2020-09-07 15:24:12.073] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:12.073] 00000000 04 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.073] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.073] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:12.073] AV8-0: AVA8_P_DETECT: Failed AUC xfer data with err -1 [2020-09-07 15:24:12.073] avalon8 found but no modules initialised [2020-09-07 15:24:12.074] USB unlock avalon8 1-22 [2020-09-07 15:24:12.074] AV8 looking for AV8 29f1:33f2 but found 0424:ec00 instead [2020-09-07 15:24:12.074] RES: avalon8 (1:22) lock=0 [2020-09-07 15:24:12.074] USB res unlock avalon8 1-22 [2020-09-07 15:24:12.074] AV8 looking for AV8 29f1:33f2 but found 0424:9514 instead [2020-09-07 15:24:12.074] AV8 looking for AV8 29f1:33f2 but found 1d6b:0002 instead [2020-09-07 15:24:12.074] Pushing sem post to thread 0 [2020-09-07 15:24:12.074] Waiting on sem in miner thread [2020-09-07 15:24:12.075] AV8-0: AVA8_P_DETECT ID[6] [2020-09-07 15:24:12.075] Pushing sem post to thread 1 [2020-09-07 15:24:12.075] Waiting on sem in miner thread [2020-09-07 15:24:12.075] AV8-1: AVA8_P_DETECT ID[5] [2020-09-07 15:24:12.075] Pushing sem post to thread 2 [2020-09-07 15:24:12.075] Waiting on sem in miner thread [2020-09-07 15:24:12.076] AV8-2: AVA8_P_DETECT ID[5] [2020-09-07 15:24:12.084] AV8-0-0: Unknown response 40 [2020-09-07 15:24:12.084] AV8-0: Module detect ID[6]: 64 [2020-09-07 15:24:12.085] AV8-0: AVA8_P_DETECT ID[7] [2020-09-07 15:24:12.085] AV8-1-0: Unknown response 40 [2020-09-07 15:24:12.085] AV8-1: Module detect ID[5]: 64 [2020-09-07 15:24:12.085] AV8-1: AVA8_P_DETECT ID[6] [2020-09-07 15:24:12.252] Succeeded delayed connect [2020-09-07 15:24:12.281] AV8-2: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:12.281] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.281] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.281] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:12.281] AV8-2: AVA8_P_DETECT: Failed AUC xfer data with err -1 [2020-09-07 15:24:12.281] AV8-2-1: avalon8 set fanmin 10 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set fanmax 100 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set mux l2h 0 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set mux h2l 1 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set h2ltime0 spd 3 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set spdlow 0 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set spdhigh 3 [2020-09-07 15:24:12.282] AV8-2-1: avalon8 set temptarget 67 [2020-09-07 15:24:12.288] AV8-2-1: avalon8 set power mode 0 [2020-09-07 15:24:12.290] AV8-0: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:12.290] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.290] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.290] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:12.290] AV8-1: AUC xfer -7, r(40-4-4)! [2020-09-07 15:24:12.290] AV8-0: AVA8_P_DETECT: Failed AUC xfer data with err -1 [2020-09-07 15:24:12.290] 00000000 04 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.290] AV8-0-1: avalon8 set fanmin 10 [2020-09-07 15:24:12.290] 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [2020-09-07 15:24:12.290] AV8-0-1: avalon8 set fanmax 100 [2020-09-07 15:24:12.290] 00000020 00 00 00 00 00 00 00 00 00 00 00 00 |............ | [2020-09-07 15:24:12.290] AV8-0-1: avalon8 set mux l2h 0 [2020-09-07 15:24:12.290] AV8-1: AVA8_P_DETECT: Failed AUC xfer data with err -1
|
|
|
|
gvb
Jr. Member
Offline
Activity: 140
Merit: 9
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 16, 2021, 02:19:48 PM |
|
Hello @hagssfin , one of my 841s (which I bought from you) has issues after an electrician turned off the main differential off and on twice. On the left side I see the lower led being lit. On the right side I see the upper led being lit. It's still mining but at 4.2Th instead of 12Th. Is it still worth trying to repair this (are there even spare parts to find?) or should I get another one or something more recent? [Firmware Version] => Avalon Firmware - 20180305 luci: 62d814c cgminer: b5b497e cgminer-packages: 960e108 Reply was 'STATUS=S,When=1610806528,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV80,Elapsed=4557,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID1=Ver[8411803-14b0f10] DNA[013e752daeef2dde] Elapsed[2733] MW[0 0 475145 467292] LW[942437] MH[0 0 1 0] HW[1] Temp[13] TMax[71] Fan[2340] FanR[22%] Vi[1207 1207 1179 1179] Vo[3693 3663 3686 3671] GHSmm[6324.77] WU[61892.45] Freq[353.58] PG[15] Led[0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[102 119 120 106 113 127 104 120 121 114 114 91 60 116 115 111 104 116 74 110 102 131 123 112 93 132] MW3[112 106 124 106 81 112 119 86 103 121 93 115 123 93 110 116 107 115 119 107 106 100 122 94 100 99] TA[78] ECHU[131073 131073 0 0] ECMM[0] FM[1]
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 17, 2021, 01:14:42 AM |
|
@gvb Hi, sorry to hear that Based on your kernel log, - both PMU boards are ok - hash board #0 is dead - hash board #1 is dead - hash board #2 is alive - hash board #3 is alive You could ask Canaan if they sell spare parts. Not sure if shipping cost will kill it. Also your electricity price etc. is the key whether it makes sense to fix it or buy a new gen. miner.
|
|
|
|
vmtorrealba
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2021, 02:32:52 PM Last edit: January 29, 2021, 01:40:57 AM by frodocooper |
|
Greetings friends, a pleasure to meet on this website to share knowledge. I share with you that since a month I have a small farm with 23 miners avalon 841 and 47 ebang e9 +, so step by step I have been learning how they work both at the hardware and software level, code reading, etc. The forum has been of a spectacular help, it has been the main guide of all my actions to take, however there are things that I still cannot understand and what more if it is not with the help of you and your guidance to solve these doubts in if possible. For example, there are error codes which I do not see in the list so I can not grasp what the system tells me and in which that specific miner would be failing, I refer to the code: Vi[1266 1266 1272 1272] Vo[3912 3932 34 94] PLL0[0 0 4 4468] PLL1[0 0 1 4471] PLL2[0 0 0 0] PLL3[0 0 0 0] GHSmm[6927.73] WU[93196.47] Freq[387.28] PG[3] Led[0] PM[0] ME[1 1 1 1] MW0[1 5 5 8 12 9 10 8 9 5 7 9 2 4 8 10 7 8 7 7 8 3 5 6 8 8] MW1[6 11 10 10 6 10 7 9 7 7 3 7 9 5 7 6 8 10 3 6 11 13 9 6 10 5] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW3[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] TA[78] ECHU[0 0 2049 133121]
I also mention that my PG column shows me the value "3", when this happens is it an error in the miner or in the power supply of the same? I apologize to you in advance for my transcription errors since my native language is Spanish. Thank you very much for your collaboration friends. Successes.
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2021, 05:29:10 PM Last edit: January 29, 2021, 01:42:22 AM by frodocooper |
|
@vmtorrealba
The error codes are all listed in the list. You need to make a "reverse sum math" for the error codes.
ECHU stands for error codes hashing unit.
Third ECHU reading for the third hash board: 2049 = 1 + 2048 1: CODE_IDLE 2048: CODE_PGFAILED
Fourth ECHU reading for the fourth hash board: 133121 = 1 + 2048 + 131072 1: CODE_IDLE 2048: CODE_PGFAILED 131072: CODE_HUFAILED
So it is saying that your second PMU board is faulty and your fourth hash board is faulty.
I would first replace the PMU board and then see if the hash boards connected to it are ok.
|
|
|
|
|