[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside!

[BitSoftGeek]

For me on each rig the miner stops after 10 submitted shares nothing happens anymore it just stuck.
It also doesn't seem to properly transmit the difficulty info sd= in the password field.

Dear ioglnx
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
If after 25 min maximum you don't get shares you can try this version that we think may solve the problem and please report back.

zFastminer-V2285
https://file.fm/f/kevswzg2
Please update the .bat file:
zFastminer-V2285 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q

Best Regards,
zFastminer team.

[1714968698]

1714968698

[1714968698]

1714968698

[1714968698]

1714968698

[BitSoftGeek]

Update April 14th: Updated version release: zFastminer-V2.2.85

• Minor bug fixes - please test only with full Rigs (single GTX 1060, 1070, 1070 TI, 1080, 1080 TI isn't fast enough) to get best result.

zFastminer-V2.2.85 Most profitable Zcoin miner for NVIDIA GPUs at this time. TESTED AND VERIFIED!
The optimization will only apply after 15~25 minute after program start to avoid disabling our miner Fee (2%).
Please use New WORKERNAME for this miner to fix rejected shares error.

Download zFastminer-V2.2.85 link:

Code:

https://file.fm/f/kevswzg2

HAPPY MINING
zFastminer team.

[BitSoftGeek]

Is the zFastminer free to use withou other pools that's not the MPH?

Dear Larvitar
zFastminer is optimized for MiningPoolHub only at this time and icludes 2% Fee...
zFastminer is Most profitable miner for NVIDIA GPUs at this time.
Please follow the updates on this thread.
HAPPY MINING  

Best Regards,
zFastminer team.
_______________________________________________

actually a static build would probably be better and/or some pointers regarding the dependencies/os version etc...

Dear djm34
Thank you for your suggestion
Please follow the updates on this thread.

Best Regards,
zFastminer team.
_______________________________________________

Please, consider releasing it for any pool:
lyra2z is also used for other coins that could be unavailable at MPH.

Thank you.

Dear Gongolo
It's in our "To Do" list.
Please follow the updates on this thread.

Best Regards,
zFastminer team.

Thank you, I will do.
I tried your miner and it is definitely faster than any other previous lyra2z miner, no doubt.
It's a pity keeping it limited to XZC only.
Good job.

Edited: P.S., consider other algos too.  

Dear Gongolo
Thank you for your feedback
we are glad to hear that you liked it
Please follow the updates on this thread.
HAPPY MINING  

Best Regards,
zFastminer team.
____________________________________________

I switched all my rigs to Win10 instead of the Linux, everything works perfectly 😄
In one of my rig i had crashes at the opening of the software, but the version zfastminer-v2285 solved the problem and now everything works fine, without any crashes, speed is twice fast as i had before with any other software.
I personally do not like Windows, but I'd love to tolerate it until you release a stable version of Linux ...

Many thank’s 👍👍👍

Dear DonMaxim
Thank you for your feedback
Finaly we released zFastminer-V2.2.85 today for everyone,
Please follow the updates on this thread.
HAPPY MINING  

Best Regards,
zFastminer team.

[principino1984]

I can confirm that 6x1080ti are working at 24.1 MH/s ... from 18.4 of the previous best miner!
Tested on 3 rigs of Zotac Blowers, MSI  Blower and MSI Armor  (25MH/s)....

Terrific job!

http://www.xtremeshack.com/images/6EkLIu.jpg
One question, is it possible to have logs to use at best with Awesome Miner program?
Otherwise I can't see if there's a problem etc etc.

Thanks

Dear principino1984
Thank you for your feedback, much appreciated!.
MPH will send to your email address notifications if some of your workers gose to IDLE,
we don't support LOGS at this time ...
Happy mining

Best Regards,
zFastminer team.

Thanks for your reply. I hope you will enable API / logs support cause it's so useful to take control of the miners automatically. In the other way I can only wait till the MPH sends the email than access the miner via teamviewer and do my stuff. If I had API, if any problem appears, my miner will automatically restart the sw if too many reject or not that many accepted shares happens.

Anyway, till now it's working great.

[Hashnamer]

Hello. Why do not you put your miner on githab? It looks suspicious.

[denhod]

Hello! One of my rigs once a day crashes. I tried all the miners version. Win10 64 5x1070 Gigabyte.
https://c.radikal.ru/c00/1804/c1/444193026d29.jpg

[BitSoftGeek]

Hello! One of my rigs once a day crashes. I tried all the miners version. Win10 64 5x1070 Gigabyte.
https://c.radikal.ru/c00/1804/c1/444193026d29.jpg

Dear denhod,
Can you try to see if one of the Gpu's core clock is boosting over 1999mhz and lower it down a little?
Depending on the Gpu silicone lottery- some cards can boost core clock over 1999Mhz and even more when the temps are dropping on cold nights, some of our 1070 were boosting over 2050Mhz and causing crashes.
Maybe this is causing the crashes like other member mentioned few pages back?
Happy mining

Best Regards,
zFastminer team.

[alnash]

Hello. Why do not you put your miner on githab? It looks suspicious.

Probably because Github.org doesn't want devs  who f*ck GPL license.

I downloaded the latest release and didn't find there any source code. Maybe there's some place where I can get it?
If zFastminer is build upon Tanguy Pruvot's ccminer (or any fork of Christian Buchner's original ccminer) -- it is under GPL v.3

[principino1984]

Now mining with 3 rigs with 6x1080ti each... I can say after a full day of mining:

6x Zotac 1080ti Blower +150GPU +200MEM: 24,55 MH/s - Power Limit set @90 and Power consumption at 138w per Vga
6x MSI 1080ti Blowe +125GPU +200MEM: 24,56MH/s - Power Limit set @90 and Power consumption at 136w per Vga
6x MSI 1080ti Armor +100GPU +200MEM: 24,25MH/s - Power Limit set @90 and Power consumption at 134w per Vga

Everything stable and working

Can't wait for a version with the logs/api enabled. By now... I'm back on Zcoin!

thanks guys for your job!

Marco

[johny78]

6x 1080ti msi gaming x
24mh 870W at the wall
power limit 60%
core +50
memory 0 or -400

thx for miner !

[OoIGR]

I have the same errors on all my 8*1080ti rigs once a day. zFastminer-V2.2.8

Code:

[2018-04-16 08:34:12] stratum_recv_line timed out
[2018-04-16 08:34:12] ...retry after 5 seconds
[2018-04-16 08:34:15] GPU #4: GeForce GTX 1080 Ti, 4132.83 kH/s
[2018-04-16 08:34:15] ...retry after 5 seconds
[2018-04-16 08:34:16] GPU #7: GeForce GTX 1080 Ti, 4282.59 kH/s
[2018-04-16 08:34:20] Stratum subscribe answer id is not correct!
[2018-04-16 08:34:21] Stratum subscribe answer id is not correct!
[2018-04-16 08:34:21] JSON-RPC call failed: [
   24,
   "unauthorized worker",
   null
]
[2018-04-16 08:34:21] ...retry after 5 seconds

[NisamRobot]

Are you guys exploiting something like this with your "fastest poolside miner" ??

https://bitcointalk.org/index.php?topic=3299496.msg34796902#msg34796902

[BitSoftGeek]

Are you guys exploiting something like this with your "fastest poolside miner" ??

https://bitcointalk.org/index.php?topic=3299496.msg34796902#msg34796902

Dear NisamRobot ,
Nice findings, it explainse the times before f2pool added Zcoin and 99% of the Zcoin hasrate was on MPH- somtimes the MPH hashrate was over 20% more then the total network hash rate,
I will not be surprised if the large privet farms (10G+)agreed to pay for such privet miner with cheats. We hope that MPH will fix it and it should not effect our miner performance.

Best Regards,
zFastminer team.

[SnOOpeRa]

Could you enable API access in the next release ( its a ccminer 2.2.5 fork you said, so you just enable it ), its really useful to monitor the miner remotely , right now if miner crash or so there is no fast way to understand that.

[BitSoftGeek]

Now mining with 3 rigs with 6x1080ti each... I can say after a full day of mining:

6x Zotac 1080ti Blower +150GPU +200MEM: 24,55 MH/s - Power Limit set @90 and Power consumption at 138w per Vga
6x MSI 1080ti Blowe +125GPU +200MEM: 24,56MH/s - Power Limit set @90 and Power consumption at 136w per Vga
6x MSI 1080ti Armor +100GPU +200MEM: 24,25MH/s - Power Limit set @90 and Power consumption at 134w per Vga

Everything stable and working

Can't wait for a version with the logs/api enabled. By now... I'm back on Zcoin!

thanks guys for your job!

Marco

6x 1080ti msi gaming x
24mh 870W at the wall
power limit 60%
core +50
memory 0 or -400

thx for miner !

Dear principino1984 and dear johny78
Thank you for your feedback
Please follow the updates on this thread.
HAPPY MINING 

Best Regards,
zFastminer team.

[Afka]

Hello,

When do you plan to release the linux version?! Thanks!

[robkoch]

I'm mining with 6x1080 and sometimes (rather irregularly) miner simply stops at any hour (looks like freezed), there is no error, GPUs are not loaded and I have to close the miner and fire again.
What could be the reason? How to solve it?

[Aculan]

I'm mining with 6x1080 and sometimes (rather irregularly) miner simply stops at any hour (looks like freezed), there is no error, GPUs are not loaded and I have to close the miner and fire again.
What could be the reason? How to solve it?

I had this happen after a strong overclocking....core 2025Mhz+ GTX 1070/1080Ti.
Now working for 1999Mhz, 3 days stably

[robkoch]

Of course, trying to squeeze the last juices from the cards, I actually gave them more than 2050 MHz, but I thought that if they work after a dozen or so hours, they are nothing
I will try to give them some more slack. Thank you for the suggestion.

[cod3gen]

Source code? You know what license ccminer is released with.