[ANN] zFastminer-v2.3.4 Most Powerful And Profitable Zcoin Miner On Poolside!

[boomboommin]

Dear Friends,
It seems that MPH getting better, so for now we are putting Supernova support on hold,
if the problems with MPH will continue, we will release next version with Supernova support.

Moreover, if you are using zFastminer older then zFastminer-v230 - please update to latest zFastminer-v232,
it's faster, more stable and you will not suffer from stratum disconnected after using IP as pool URL.

Best Regards,
zFastminer team.

today many blocks 300% est., now is 900%+ est. it seem`s sadly

[caleb150]

The miner gives my hashrate a 35% boost. Mining with 1080ti with 4250 hash per card.

[mcetin35]

Hi guyz, just a quick question: Can I use this miner for the other coins like Criptoreal (CRS) which uses the same algo Lyra2z ?
sorry if you mention it somewhere and I did not see. 

[_Dr2]

Hi guyz, just a quick question: Can I use this miner for the other coins like Criptoreal (CRS) which uses the same algo Lyra2z ?
sorry if you mention it somewhere and I did not see. 

You may use this miner for other coins but on MPH only 
On MPH You may mine XZC with this algo

[hyper33]

Dear Friends,
It seems that MPH getting better, so for now we are putting Supernova support on hold,
if the problems with MPH will continue, we will release next version with Supernova support.

Moreover, if you are using zFastminer older then zFastminer-v230 - please update to latest zFastminer-v232,
it's faster, more stable and you will not suffer from stratum disconnected after using IP as pool URL.

Best Regards,
zFastminer team.

If things don't improve could you add support for f2pool? They have majority of network hashrate.

Thanks

[NisamRobot]

We really need more pools, please!!!

[zomby]

hi zFastminer team geting this error now and then any suggestion to fix thank youuuuuu keep up the good work

error mesage: stratum_recv_line timed out

[MaryAngela_Fantocci]

Hello, have a problem with rejects - low diff shares. What should I change to avoid this?

[DonMaxim]

Hello, have a problem with rejects - low diff shares. What should I change to avoid this?

Change the worker name to a new worker name

[DonMaxim]

hi zFastminer team geting this error now and then any suggestion to fix thank youuuuuu keep up the good work

error mesage: stratum_recv_line timed out

Last week i have it also sometimes, but the miner or pool speed not effected with this line of error and everything is working fine for me ...

[xixou]

397.xx branch is so far buggy and creates bsod,
please make a version for 391.35

[Aculan]

397.xx branch is so far buggy and creates bsod,
please make a version for 391.35

Tried 397.55 Hotfix?
I have everything working fine GTX 1060 1070 and 1080Ti

[ruplikminer]

It's true, this miner gives about 20% speed improvement. But unfortunately some of this gain is lost because of the very bad miningpoolhub pool.

This miner would be so much better if open to use any pool. This way it would be perfect.

But right now, being forced to use miningpoolhub is quite bad.

I will stop using it for now. Let me know when it will be open like all the other miners, to mine on all the pools.

[litosfera]

It wont even start with 6x 1060 3gb, just a black flash screen.....

Latest driver , and latest miner version...


Any ideas?

[MaryAngela_Fantocci]

397.xx branch is so far buggy and creates bsod,
please make a version for 391.35

Tried 397.55 Hotfix?
I have everything working fine GTX 1060 1070 and 1080Ti

There is 397.64 available for download. One day - stable and little little boost

[Buyingallcoinsz]

MPH is being ridiculous on average luck.  with 33-50% hashrate last 24 hours still not getting closer to 50% of the blocks found.  The last block was about 4 hours to find at 1000%+ luck sigh.  Without something like this, you would be sunk.  It is not like the average luck is close to 100% either with the 7 day at 118% the 4 week, at 118% and the 12 month, increasing to 107%.

[Dr_Victor]

It wont even start with 6x 1060 3gb, just a black flash screen.....

Latest driver , and latest miner version...


Any ideas?

I have 6x 1060x3 worked. Try to add virtual mem and run w/o overclocking.

[xixou]

397.xx branch is so far buggy and creates bsod,
please make a version for 391.35

Tried 397.55 Hotfix?
I have everything working fine GTX 1060 1070 and 1080Ti

There is 397.64 available for download. One day - stable and little little boost

Still gives BSOD with aida64 and msi afterburner.



https://forums.geforce.com/default/topic/1052670/geforce-drivers/official-397-64-game-ready-whql-display-driver-feedback-thread-released-5-9-18-/17/

[MaryAngela_Fantocci]

397.xx branch is so far buggy and creates bsod,
please make a version for 391.35

Tried 397.55 Hotfix?
I have everything working fine GTX 1060 1070 and 1080Ti

There is 397.64 available for download. One day - stable and little little boost

Still gives BSOD with aida64 and msi afterburner.



https://forums.geforce.com/default/topic/1052670/geforce-drivers/official-397-64-game-ready-whql-display-driver-feedback-thread-released-5-9-18-/17/

Strange, because I have rigs with Windows 7 and 10, and no problems with new drivers... Maybe you should try use DDU for clean install.

[boomboommin]

397.xx branch is so far buggy and creates bsod,
please make a version for 391.35

Tried 397.55 Hotfix?
I have everything working fine GTX 1060 1070 and 1080Ti

There is 397.64 available for download. One day - stable and little little boost

Still gives BSOD with aida64 and msi afterburner.



https://forums.geforce.com/default/topic/1052670/geforce-drivers/official-397-64-game-ready-whql-display-driver-feedback-thread-released-5-9-18-/17/

Strange, because I have rigs with Windows 7 and 10, and no problems with new drivers... Maybe you should try use DDU for clean install.

I using win10 and last update does with rigs same things: BSOD, lagging. 30 minutes to install clear win10 and stability comes back.