alizali
Newbie
Offline
Activity: 197
Merit: 0
|
|
July 28, 2018, 01:09:40 PM |
|
I don't like using linux.
You don't have to "use" it like in everyday use -- just install it, set it and forget it I dont have any info about linux commands I never installed any linux OS for now. I think first i will have to install linux OS to My rig's hdd and install drivers and download this miner and make a .bat file ? it is very easy right now with hiveOS i can do it for you with a little donate Does it work on a USB stick or we need to install it to miner rig HDD? A little guide would be good like me who have no idea for linux commands.. you just need a usb stick install hiveos run custom miner
|
|
|
|
Saphire
|
|
July 28, 2018, 05:36:43 PM |
|
I don't like using linux.
You don't have to "use" it like in everyday use -- just install it, set it and forget it I dont have any info about linux commands I never installed any linux OS for now. I think first i will have to install linux OS to My rig's hdd and install drivers and download this miner and make a .bat file ? it is very easy right now with hiveOS i can do it for you with a little donate Does it work on a USB stick or we need to install it to miner rig HDD? A little guide would be good like me who have no idea for linux commands.. you just need a usb stick install hiveos run custom miner ok thank you, i found a video guide for hiveOS i will follow that guide step by step. I think i can do it. There are 4 steps download, write disk image, connect to the rig and register.
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
July 29, 2018, 08:54:28 AM |
|
hiveos setup with tdx was easy, hardest part was toi understand that there is already wallet ready to use - just switch wallet addres and it works like a charm. seting core/voltage was a little strugle, but somehow i am getting 2x less coins than expected. I am doing right now test on one rig 8x sapphire rx 570 core 1275 voltage 1000 1025 975 1000 975 1000 975 1000 total usage from wall 1150w ~3.1mhs per card, ~25mhs total accepted shares from miner 99.67% pool shows no rejected shares
0.3gin in 12h calculators show like 0.7gin in 12h
I have a feeling that boosting voltage a little or lovering core could help. it seems that ram does not affect mining hashrate. i have setup ram on 2000mhz
|
|
|
|
SigiSinatra
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 30, 2018, 01:10:02 AM |
|
hiveos setup with tdx was easy, hardest part was toi understand that there is already wallet ready to use - just switch wallet addres and it works like a charm. seting core/voltage was a little strugle, but somehow i am getting 2x less coins than expected. I am doing right now test on one rig 8x sapphire rx 570 core 1275 voltage 1000 1025 975 1000 975 1000 975 1000 total usage from wall 1150w ~3.1mhs per card, ~25mhs total accepted shares from miner 99.67% pool shows no rejected shares
0.3gin in 12h calculators show like 0.7gin in 12h
I have a feeling that boosting voltage a little or lovering core could help. it seems that ram does not affect mining hashrate. i have setup ram on 2000mhz
Feel free to set memory clock (Mhz): to 300 mhz (it's not important for lyra2z). You will save some watts and temp will be slightly lower.
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
July 30, 2018, 06:44:19 AM |
|
In a vierd way hiveos does not allow me to do that - setting core lower just sends rig to reboot.
|
|
|
|
SigiSinatra
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 30, 2018, 01:41:52 PM |
|
In a vierd way hiveos does not allow me to do that - setting core lower just sends rig to reboot.
try this settings for start : core clock : 1100 (start with 1100 and try to reach 1270) core stat (index) : 3 core voltage : 930 (940 if you go over 1200 on core) memory clock : 300
|
|
|
|
Saphire
|
|
July 30, 2018, 04:45:15 PM |
|
Good news i done it Now what about OC settings for my Sapphire RX 580 Nitro+ rig? What should be those settings? Core Clock (Mhz): Core State (Index): Core Voltage (mV): Memory Clock (Mhz): Mem State (Index):
|
|
|
|
SigiSinatra
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 30, 2018, 09:51:52 PM |
|
Good news i done it Now what about OC settings for my Sapphire RX 580 Nitro+ rig? What should be those settings? Core Clock (Mhz): Core State (Index): Core Voltage (mV): Memory Clock (Mhz): Mem State (Index): Try this : Core Clock (Mhz): 1270 Core State (Index): 3 Core Voltage (mV): 930~940 Memory Clock (Mhz): 300 (or 600 if you notice some hashdrop) Mem State (Index): leave empty
|
|
|
|
rocketr
Newbie
Offline
Activity: 16
Merit: 0
|
|
July 30, 2018, 11:58:11 PM |
|
Posting again because I guess no one else tried or reported back... Has anyone tried this it is suppose to reduce power consumption. Didn’t know if any of you would have luck with it. I tired the first suggestion without luck and was going to see if the second suggestion maybe worked by the doctor aka tekcomm. https://github.com/RadeonOpenCompute/ROCm/issues/463 I tried all this with no luck... Open CL still doesn't work... tried the v5 image, 16.04 ubuntu, and 18.04 ubuntu installed to a hard drive.
|
|
|
|
Saphire
|
|
July 31, 2018, 12:18:05 PM |
|
Good news i done it Now what about OC settings for my Sapphire RX 580 Nitro+ rig? What should be those settings? Core Clock (Mhz): Core State (Index): Core Voltage (mV): Memory Clock (Mhz): Mem State (Index): Try this : Core Clock (Mhz): 1270 Core State (Index): 3 Core Voltage (mV): 930~940 Memory Clock (Mhz): 300 (or 600 if you notice some hashdrop) Mem State (Index): leave empty Why we need to decrease the mem. clock ?
|
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
July 31, 2018, 12:35:38 PM |
|
Good news i done it Now what about OC settings for my Sapphire RX 580 Nitro+ rig? What should be those settings? Core Clock (Mhz): Core State (Index): Core Voltage (mV): Memory Clock (Mhz): Mem State (Index): Try this : Core Clock (Mhz): 1270 Core State (Index): 3 Core Voltage (mV): 930~940 Memory Clock (Mhz): 300 (or 600 if you notice some hashdrop) Mem State (Index): leave empty Why we need to decrease the mem. clock ? Lyra2z isn't a memory-bound algorithm, so reducing memory you can save some power.
|
|
|
|
Saphire
|
|
July 31, 2018, 01:45:13 PM |
|
Good news i done it Now what about OC settings for my Sapphire RX 580 Nitro+ rig? What should be those settings? Core Clock (Mhz): Core State (Index): Core Voltage (mV): Memory Clock (Mhz): Mem State (Index): Try this : Core Clock (Mhz): 1270 Core State (Index): 3 Core Voltage (mV): 930~940 Memory Clock (Mhz): 300 (or 600 if you notice some hashdrop) Mem State (Index): leave empty Why we need to decrease the mem. clock ? Lyra2z isn't a memory-bound algorithm, so reducing memory you can save some power. Thank you.
|
|
|
|
|
alizali
Newbie
Offline
Activity: 197
Merit: 0
|
|
August 01, 2018, 06:52:51 AM |
|
lyra2z is loosing rank in profitability. move to ETH again? any advice?
|
|
|
|
fluxy12
Jr. Member
Offline
Activity: 145
Merit: 1
|
|
August 01, 2018, 09:53:02 AM |
|
lyra2z is loosing rank in profitability. move to ETH again? any advice?
I switched today ;( i feel so bad, it was crazy but now that's finished ...
|
|
|
|
CharlieCox
Member
Offline
Activity: 212
Merit: 12
|
|
August 01, 2018, 10:52:04 AM |
|
RX Vega still works better on Lira2z than on CNv7
|
|
|
|
PKBO
Newbie
Offline
Activity: 118
Merit: 0
|
|
August 01, 2018, 02:54:46 PM |
|
lyra2z is loosing rank in profitability. move to ETH again? any advice?
I switched today ;( i feel so bad, it was crazy but now that's finished ... becouse its small market and too mutch people promoted miner, like always. now its worthless. Its sad, now ETH earns more than 95% off shitcoins, it will be really bad when asics comes into market.
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
August 02, 2018, 06:01:01 PM |
|
RX Vega still works better on Lira2z than on CNv7 are you mining with tdx on ubuntu? sounds like nightmare for me.
|
|
|
|
CharlieCox
Member
Offline
Activity: 212
Merit: 12
|
|
August 03, 2018, 08:52:23 AM |
|
are you mining with tdx on ubuntu? sounds like nightmare for me.
Yes, this is correct -- tdxminer on Ubuntu utilising RX Vega cards.
|
|
|
|
kobeotto
Newbie
Offline
Activity: 51
Merit: 0
|
|
August 03, 2018, 09:38:28 AM |
|
What Param do you use for AMD 480 ? i hit 3 mhs max..
|
|
|
|
|