meornot69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 87
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2014, 09:43:31 PM |
|
i have a problem, and i wonder if anyone got the same issue after 2 days of mining i start to get errors on both miners 2 antiminers s1: ooxxxooo oxoxoxxo oooxoooo oxxooooo
On BTC Guild, i have the same hash rate.
After a reboot, the errors goes away, and i can mine again for 2 days or so...
Ignore them it is just a display bug. I agree. If your hashrates are fine the X does not mean anything. However if you keep getting that error check your PSU. That error is listed in the antiminer setup and troubleshoot guide: https://bitcointalk.org/index.php?topic=344970.0i don't think is the soruce, cause i use corsair 750w, for every miner.
|
|
|
|
S4VV4S
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2014, 09:57:57 PM |
|
i have a problem, and i wonder if anyone got the same issue after 2 days of mining i start to get errors on both miners 2 antiminers s1: ooxxxooo oxoxoxxo oooxoooo oxxooooo
On BTC Guild, i have the same hash rate.
After a reboot, the errors goes away, and i can mine again for 2 days or so...
Ignore them it is just a display bug. I agree. If your hashrates are fine the X does not mean anything. However if you keep getting that error check your PSU. That error is listed in the antiminer setup and troubleshoot guide: https://bitcointalk.org/index.php?topic=344970.0i don't think is the soruce, cause i use corsair 750w, for every miner. I heard some corsairs have problems. Anyways, I am not an expert just giving my 2c
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2014, 10:32:45 PM |
|
i have a problem, and i wonder if anyone got the same issue after 2 days of mining i start to get errors on both miners 2 antiminers s1: ooxxxooo oxoxoxxo oooxoooo oxxooooo
On BTC Guild, i have the same hash rate.
After a reboot, the errors goes away, and i can mine again for 2 days or so...
Ignore them it is just a display bug. I agree. If your hashrates are fine the X does not mean anything. However if you keep getting that error check your PSU. That error is listed in the antiminer setup and troubleshoot guide: https://bitcointalk.org/index.php?topic=344970.0i don't think is the soruce, cause i use corsair 750w, for every miner. I heard some corsairs have problems. Anyways, I am not an expert just giving my 2c some power supplies dont provide the full 12V at over 70% rated capacity for prolonged time. I had a 670W server PSU that was switching off and on for 5/10 min cylces at 375MHz. Its fine to power only 1 blade with the other supported by an ATX with 750W on 12V that is also running another 387.5MHz. (an ULTRA X3)
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2014, 10:52:29 PM |
|
only one word about psus and how important they are to mining.....
SEASONIC !
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
Share2Care
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 12:07:06 AM |
|
Now shipping Feb 8th onwards at 1.45BTC ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
erk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 12:17:16 AM |
|
Now shipping Feb 8th onwards at 1.45BTC ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Where did you read that?
|
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 12:22:50 AM |
|
|
Buy & Hold
|
|
|
qosmio
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 12:28:44 AM |
|
today received my new antminer from bitmain working very nice 180ghash as promised. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
testing ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
arashd
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 04:05:13 AM |
|
I am having a problem checking out with an order on the website today. Anybody know when this will be resolved? Thanks ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWFeVCXI.png&t=665&c=zAM4bq2YKm4nng) I heard of a few people who tried to access their site yesterday and today and had problems. I would wait until the issue is resolved. same problem here
|
|
|
|
giletto
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 06:33:12 AM |
|
DiffS is always =0 so what is your DiffS? I never see another number then 0. So why you want add 0? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Oh if but that was only true, perhaps yours are not up long enough or my piece of string to the Internet is just too slow ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Some of my ant's do not have any DiffS but some do when you leave them running ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2F800x600q90%2F18%2F9uxl.jpg&t=665&c=1Lc2R0Z9s74eyQ) To be honest i check not always only one time for test the HW rate at different mhz. Probably after 2 or 3 hour, and decide the OC frequency. But if you check your long term first running miner, you will see that HW/(HW+DiffA+DiffR)% result in 1.28% and HW/(HW+DiffA+DiffR+DiffS)% result in 1.28% too, because the little difference in DiffS will not effect the HW after that long time. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 07:48:54 AM |
|
I just went through all my miners and calculated the error rates - most are between 0.15%-0.9% and running in the 375/387.5/400 range. I tuned one down that was making 2.6% errors and tuned two up that were less than 0.1% errors - presumably that should afford me an extra 10GH or so in total
|
|
|
|
giletto
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 09:09:56 AM |
|
I just went through all my miners and calculated the error rates - most are between 0.15%-0.9% and running in the 375/387.5/400 range. I tuned one down that was making 2.6% errors and tuned two up that were less than 0.1% errors - presumably that should afford me an extra 10GH or so in total
This is exactly the way how i do too.
|
|
|
|
pvnamk19
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 11:02:07 AM |
|
Can a Seasonic X-850 850W 80Plus Gold suit for 2 OC Ant-S1? Thanks!
|
|
|
|
Jeffrey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 11:22:27 AM |
|
Can a Seasonic X-850 850W 80Plus Gold suit for 2 OC Ant-S1? Thanks!
I wouldn't do it. An OC S1 uses somewhere around 500w Times 2 is 1000w Plus 10% for safety (you should never push your PSU to it's very max over a long time) gets you to at least 1100w on 12v , or 92A http://www.seasonic.com/pdf/datasheet/NEW/Retail/X-650-750-850.pdfLooking at your PSU I can see it only delivers 840w on 12v This would be enough for 2 S1's at stock speed, perhaps you can run 2 of them at 190GH/s (375Mhz), but it's already getting close to it's maximum. You would need a PSU which has like 1200w (and double-check it can deliver at least 1100w/92A on 12v) Depending on prices you might want to consider buying 2 PSU's of 650w to 700w (again, check the power it delivers on 12v)
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 01:21:58 PM |
|
still getting error on checkout.. can anyone get an order in? Unknown error:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
davebodger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 01:41:24 PM |
|
still getting error on checkout.. can anyone get an order in? Unknown error:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Not me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I tried different quantities. It may be related to me trying to use a coupon, but I don't want to order without using one. Hopefully they are working on it but just maybe they are all on holiday now.
|
If you think I deserve it - BTC always welcome - 14GkxT2xcpgvGVBgMjtGeFiXrxnttBSRRF
|
|
|
PaintShopPro6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 02:02:00 PM |
|
still getting error on checkout.. can anyone get an order in? Unknown error:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Still not working for me
|
|
|
|
PaintShopPro6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 02:05:33 PM |
|
still getting error on checkout.. can anyone get an order in? Unknown error:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Not me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I tried different quantities. It may be related to me trying to use a coupon, but I don't want to order without using one. Hopefully they are working on it but just maybe they are all on holiday now. I confirmed that coupons have no affect on the bug
|
|
|
|
flipacoin
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 02:54:01 PM |
|
Tried as well.. Still the same "Unknown error:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target" upon checkout...
I'm sure they'll get it fixed in a few days as they return from the Holiday.
-Flipacoin
|
|
|
|
lenny_
Legendary
Offline
Activity: 1036
Merit: 1000
DARKNETMARKETS.COM
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2014, 06:09:56 PM |
|
still getting error on checkout.. can anyone get an order in? Unknown error:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Not me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I tried different quantities. It may be related to me trying to use a coupon, but I don't want to order without using one. Hopefully they are working on it but just maybe they are all on holiday now. Confirming, same error here
|
|
|
|
|