Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip

[jamesc760]

You buy an expensive piece of mining hardware and you feed it with a cheap power supply??? Are you nuts??? Don't ever skimp out on the most important of the equation: POwer. Go get a nice Corsair PSU, at least 500 Watt if you are not overclocking.

[jamesc760]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

[CYPER]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

I paid 216 for 9.
But there was no consistency in the charges. I received 3 invoices (as the Ants were 3x3) and each got a different amount.

[Xer0]

can someone point me to the location of temp sensor?

[motd2k]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

I paid 216 for 9.
But there was no consistency in the charges. I received 3 invoices (as the Ants were 3x3) and each got a different amount.

It's a price based on the spot USD/GBP rate.

[GnomeX]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

I paid 216 for 9.
But there was no consistency in the charges. I received 3 invoices (as the Ants were 3x3) and each got a different amount.

It's a price based on the spot USD/GBP rate.

Is there a Canadian that can speak to our cost?

[dropt]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

I paid 216 for 9.
But there was no consistency in the charges. I received 3 invoices (as the Ants were 3x3) and each got a different amount.

It's a price based on the spot USD/GBP rate.

Is there a Canadian that can speak to our cost?

~$13.26 per COD.

[nbtcminer]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

I paid 216 for 9.
But there was no consistency in the charges. I received 3 invoices (as the Ants were 3x3) and each got a different amount.

It's a price based on the spot USD/GBP rate.

Is there a Canadian that can speak to our cost?

~$13.26 per COD.

Thanks for that! I was wondering what the cost might be on incoming units.

[dropt]

Is there a Canadian that can speak to our cost?

~$13.26 per COD.

Thanks for that! I was wondering what the cost might be on incoming units.

NP 

[klondike_bar]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

I paid 216 for 9.
But there was no consistency in the charges. I received 3 invoices (as the Ants were 3x3) and each got a different amount.

It's a price based on the spot USD/GBP rate.

Is there a Canadian that can speak to our cost?

~$13.26 per COD.

^sounds about right. I remember picking up 2 units cost ~$52 (about $20 each plus a $10 or more brokerage fee) while a single unit was about $30 due to the fee still being the same. getting more in a shipment would thus negate some of the fixed fees

[Aurum]

"About how much is the customs fee?  TIA"

If you are in UK, about 35 Pounds each, if you're in the good ole US, $0.

Most excellent as I'm in the colonies 

Think I'll buy one of these AntEaters today.

[nairb131]

So I was trying to use the 'Restore to default' setting in my ANTminer today and it restarted automatically like it was supposed to but it doesn't let me log in. I shows the black LuCi screen and then moves to a page cannot be loaded screen.


I am tried used the hard reset by jumping the wires but it does not work. Has anyone had the same problem?

[dropt]

So I was trying to use the 'Restore to default' setting in my ANTminer today and it restarted automatically like it was supposed to but it doesn't let me log in. I shows the black LuCi screen and then moves to a page cannot be loaded screen.


I am tried used the hard reset by jumping the wires but it does not work. Has anyone had the same problem?

I've had this, and it was a result of the Antminer being on a different IP after the reset.  The Black Luci screen appears to have been cached at some point, but a connection to the unit must be made for the login prompts to appear.  If you have a recent one, the IP defaults to 192.168.1.99, but you can try 192.168.2.99 if you're not getting any action.  FWIW I'm using a laptop to connect to the unit (hardwire) and have to turn the laptop wifi off to gain access.  YMMV.

[n3xus]

you could always log into your router to see what ip address it is.

[pvnamk19]

@Bitmain:
Happy new lunar year!
Going back to work and start shiping Antminers, right?
Please share some information for the order: 00120140129145153206BzfKJdk206A7

Thanks!

[alfabitcoin]

can someone point me to the location of temp sensor?

In the midlee of the pcb, its little chip alone in the middle of the blade.

[joeofall]

Hi,

may i check with you all, Antminer support which mining pool ?

[ineedit]

Hi,

may i check with you all, Antminer support which mining pool ?

Nearly all, definitely the majors.

[freebit13]

Hi,

may i check with you all, Antminer support which mining pool ?

The antminers use CGMiner, so you can use any pool that supports it.

[joeofall]

Hi,

may i check with you all, Antminer support which mining pool ?

The antminers use CGMiner, so you can use any pool that supports it.

thansk you for the info,