Bitcoin Forum
December 11, 2024, 01:14:57 PM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1] 2 3 4 5 6 7 8 9 10 »  All
  Print  
Author Topic: [ANN] Twinfury USB miner  (Read 30184 times)
aauer1 (OP)
Member
**
Offline Offline

Activity: 110
Merit: 10



View Profile
November 24, 2013, 09:18:46 PM
Last edit: February 20, 2014, 07:24:17 PM by aauer1
 #1

Hello Community,

I would like to annouce my latest development. It is a "Twin Bitfury Chip USB Miner". It is the further development of the Blue-/Redfury miners I developed some month ago. I'm posting this because a very limited number of 200 devices are manufactured right now. They will be available soon for sale.


Some specs of the device:
  • Rated hashrate: 4.5-5GH/s (Prototypes are currently hashing stable at 4+GH/s on an USB 2.0 port)
  • Power usage: ~3.25W@4GH/s (~0.8125W/GH)
  • Dimension: L55mm x W35mm x H37mm (including the heatsink and the components on the PCB, USB connector excluded)
  • Powered from the USB port. No external power supply needed
  • Temperature sensor to measure the device temperature
  • Software controlled voltage scaling

Compared to the Blue-/Redfurys, the Twin Bitfury Miner is about 5mm wider and 10mm shorter. The heatsink is bigger to cope with the generated heat of both Bitfury chips. An additional temperature sensor is used to track the temperature of the device. Currently, the device is running with a modified version of bfgminer 3.6.0. The device is supported by bfgminer 3.7.0 and higher. The Twinfury miner is tested on Windows, Linux and Mac OS. The Raspberry Pi can also be used to use the Twinfury. But you definitely need a USB hub.

For Mac OS, nwoolls has written a blog post about the Twinfury: http://blog.nwoolls.com/2013/12/28/bitcoin-mining-on-mac-os-x-twinfury-asics/

My prototypes are hashing stable at 4+GH/s on an USB 2.0 port. I guess most of the USB 2.0 ports are able to source a bit more current than the rated 500mA. However, to be on the safe side, the device should better be used on an USB 3.0 port or on an USB hub which is rated for a higher current. The devices comes with a preloaded USB bootloader for updating the device firmware if necessary.

Updates
26.11.2013:bfgminer 3.7.0 is supporting the Twinfury!
27.11.2013:Price fixed (see above)
29.11.2013:I got the assembled PCBs from the fab and they are looking so good.
04.12.2013:Online shop will be available soon: http://minecoin.net. Register with your mail address to get notified when the shop opens.
06.12.2013:First units are available in our online shop.
13.12.2013:One tuning method published on http://minecoin.net.
18.12.2013:We reduced the price to 250 EUR per unit as a Christmas special.
02.01.2014:We wish everyone a happy new year. We are again ready to accept your orders. All the units we ship from now on support the voltage scaling feature.
20.02.2014:SOLD OUT


If you have any questions, please use this thread. I will also keep you updated about the device and it's availability here!


4.5-5GH/s Twin Bitfury USB Miner | https://bitcointalk.org/index.php?topic=345294
BTC: 1Q2kFyoqVdYjoguvSsVAhsr66CtF2c3YX4
Dirtyissa
Newbie
*
Offline Offline

Activity: 10
Merit: 0


View Profile
November 24, 2013, 10:28:03 PM
 #2

How much € Is it ? And you from America or europ?
aauer1 (OP)
Member
**
Offline Offline

Activity: 110
Merit: 10



View Profile
November 24, 2013, 10:41:49 PM
 #3

How much € Is it ? And you from America or europ?

The price depends on a number of things I have to consider. So, can't tell you a price at the moment.
I'm from Europe.

4.5-5GH/s Twin Bitfury USB Miner | https://bitcointalk.org/index.php?topic=345294
BTC: 1Q2kFyoqVdYjoguvSsVAhsr66CtF2c3YX4
Bicknellski
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000



View Profile
November 25, 2013, 06:06:48 AM
 #4

Another solid product Andreas, Good Luck!

Dogie trust abuse, spam, bullying, conspiracy posts & insults to forum members. Ask the mods or admins to move Dogie's spam or off topic stalking posts to the link above.
Chronikka
Hero Member
*****
Offline Offline

Activity: 658
Merit: 504



View Profile
November 25, 2013, 06:09:09 AM
 #5

Curious why not go for USB 3.0 spec standard for more power? The Bi-fury usb supposedly can hit 5.3 gh/s stable.

You recommend USB 3.0 for increased current but will it actually draw a full 900 mA?

"The true sign of intelligence is not knowledge but imagination"  -Albert Einstein
klintay
Legendary
*
Offline Offline

Activity: 1775
Merit: 1032


Value will be measured in sats


View Profile WWW
November 25, 2013, 06:52:57 AM
 #6

Nice they look sweet! reserved!
Is there a discount for buying in bulk?
kr105
Hero Member
*****
Offline Offline

Activity: 938
Merit: 501


View Profile
November 25, 2013, 07:52:25 AM
 #7

Awesome, looking forward to this product! Can we reserve them?
klintay
Legendary
*
Offline Offline

Activity: 1775
Merit: 1032


Value will be measured in sats


View Profile WWW
November 25, 2013, 08:16:34 AM
 #8

If it is drawing 900mA, on a 20 port usb hub that would be almost 20 amps. Is there any risk in running that much power through the hub. Won't it burn out the hub internal tracks? I mean are standard usb hubs designed to take this much current?
railzand
Sr. Member
****
Offline Offline

Activity: 462
Merit: 250

Lux e tenebris


View Profile
November 25, 2013, 08:34:33 AM
 #9

very interested

aauer1 (OP)
Member
**
Offline Offline

Activity: 110
Merit: 10



View Profile
November 25, 2013, 08:43:46 AM
 #10

Curious why not go for USB 3.0 spec standard for more power? The Bi-fury usb supposedly can hit 5.3 gh/s stable.

You recommend USB 3.0 for increased current but will it actually draw a full 900 mA?

The power consumption isn't depending on your will. The consumed power depends mostly on the Bitfury chips and how they are used. These are the power hungry parts on the miner. But you cannot tell the chips they should use a specific amount of current. The power depends basically on two things:
1. supply voltage of the chip and
2. frequency of the internal oscillator (this is a software thing)

I designed the board to be stable. Doesn't want to get them all back because the specified hash rate is hardly met. For the final hash rate, I have to test the miners when I get them from the fab.

To come back to your original question. I tested my boards on USB 2.0 ports. And they are working stable for days and they are not hashing faster on an USB 3.0 port. But I know that the cosumed current is higher then specified for USB 2.0. So, I have to tell you that it is better to run them on USB 3.0 ports to be within the specs of the USB. But there are also some USB 2.0 hubs which can cope with the higher current.
Furthermore, I think my prototypes have some bad performing Bitfury chips on it. So, I hope the final product will perform better.

Some notes for the engineers out there: The Twin Bitfury Miner can be modified to support scaling the supply voltage of the Bitfury chip. But therefore some resistors have to be changed and the firmware has to be modified to support this feature.

4.5-5GH/s Twin Bitfury USB Miner | https://bitcointalk.org/index.php?topic=345294
BTC: 1Q2kFyoqVdYjoguvSsVAhsr66CtF2c3YX4
aauer1 (OP)
Member
**
Offline Offline

Activity: 110
Merit: 10



View Profile
November 25, 2013, 08:45:14 AM
 #11

If it is drawing 900mA, on a 20 port usb hub that would be almost 20 amps. Is there any risk in running that much power through the hub. Won't it burn out the hub internal tracks? I mean are standard usb hubs designed to take this much current?

If they are specified for this amount of current, it should be working. Depends probably on the quality of the product.

4.5-5GH/s Twin Bitfury USB Miner | https://bitcointalk.org/index.php?topic=345294
BTC: 1Q2kFyoqVdYjoguvSsVAhsr66CtF2c3YX4
AuroraHF
Hero Member
*****
Offline Offline

Activity: 784
Merit: 500


View Profile
November 25, 2013, 08:47:27 AM
 #12

Looks really good, when are you planning to finalize the price and ship it out?

Also, have you tested it on a USB 3.0?

lmao
aauer1 (OP)
Member
**
Offline Offline

Activity: 110
Merit: 10



View Profile
November 25, 2013, 08:56:42 AM
 #13

Looks really good, when are you planning to finalize the price and ship it out?

Also, have you tested it on a USB 3.0?

Yes, I tried one of my prototype on a USB 3.0 port. But wasn't hashing with a higher rate. But I think the prototypes have some bad performing chips on it. Final hash rate will be tested when I get the devices from the fab.

The plan is to finalize the price until next week. Hopefully, the production finishes also this week and I have the devices in hand next week. Thats the plan.

4.5-5GH/s Twin Bitfury USB Miner | https://bitcointalk.org/index.php?topic=345294
BTC: 1Q2kFyoqVdYjoguvSsVAhsr66CtF2c3YX4
AuroraHF
Hero Member
*****
Offline Offline

Activity: 784
Merit: 500


View Profile
November 25, 2013, 08:59:01 AM
 #14

Looks really good, when are you planning to finalize the price and ship it out?

Also, have you tested it on a USB 3.0?

Yes, I tried one of my prototype on a USB 3.0 port. But wasn't hashing with a higher rate. But I think the prototypes have some bad performing chips on it. Final hash rate will be tested when I get the devices from the fab.

The plan is to finalize the price until next week. Hopefully, the production finishes also this week and I have the devices in hand next week. Thats the plan.

I see. Are you planning to ship the product overseas or only in land?

lmao
ercolinux
Legendary
*
Offline Offline

Activity: 938
Merit: 1000



View Profile WWW
November 25, 2013, 09:04:21 AM
 #15

It's a really nice product: if the price is nice too I'll buy some

Bitrated user: ercolinux.
balanghai
Sr. Member
****
Offline Offline

Activity: 364
Merit: 253


View Profile
November 25, 2013, 09:08:53 AM
 #16

That's a neat miner there. Saves space and easier cooling I guess. Please let us know the price as soon as you have them all checked.
Dwarf #8
Newbie
*
Offline Offline

Activity: 7
Merit: 0


View Profile
November 25, 2013, 02:36:24 PM
 #17

Looks interesting, will be following this thread  Grin
lubah
Full Member
***
Offline Offline

Activity: 360
Merit: 100


View Profile
November 25, 2013, 02:40:23 PM
 #18

put me down for 2 to 5 depending on price...
bclcjunkie
Hero Member
*****
Offline Offline

Activity: 833
Merit: 1001



View Profile
November 25, 2013, 02:53:38 PM
 #19

hey do you intend to produce boards? since you have access to fab i figured you might as well start assembling bigger miners...
firejuan
Sr. Member
****
Offline Offline

Activity: 256
Merit: 250

Because it's sterile...


View Profile WWW
November 25, 2013, 04:52:52 PM
 #20

Watching and waiting for price.

Pages: [1] 2 3 4 5 6 7 8 9 10 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!