Bitcoin Forum
December 01, 2024, 05:22:26 PM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1] 2 3 4 5 6 »  All
  Print  
Author Topic: - One String - a novel bitfury miner design -  (Read 21368 times)
intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 14, 2013, 02:09:50 PM
Last edit: December 14, 2013, 02:45:36 PM by intron
 #1

We did a 15 bitfury miner design using the proprietary
'string' feature this ASIC has. In a string, all chips are
arranged in a series configuration and power is applied
accordingly. So instead of a low voltage/high current
power supply, a less exotic power source can be used,
driving down cost considerably and taking up less board
area.

The board measures 70 x 100 mm, is powered with 12 Volt
and has a USB interface. As no DC/DC converter is needed,
BOM costs can be well below $ 10 (ex. PCB and cooling).

Hashrate can be compared to conventional designs and
overclocking can be achieved by just increasing the supply
voltage within certain limits. Reported hashrate is with 12V8
power supply and with a 2A6 current.

Cooling for the prototype was done using a low-cost
CPU heatsink. Temperatures measured on the PCB were
in the 50..70 oC range.







intron & c-scape

Note: Some images were retouched to protect our IP.
Hope you understand.
intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 14, 2013, 02:10:07 PM
 #2

- reserved -
deathmul
Sr. Member
****
Offline Offline

Activity: 472
Merit: 250



View Profile
December 14, 2013, 02:37:21 PM
 #3

How much?

fractal02
Hero Member
*****
Offline Offline

Activity: 504
Merit: 500



View Profile
December 14, 2013, 02:38:42 PM
 #4

Well done Intron and c-scape !

Selling a miner based on this design is planned ?
intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 14, 2013, 02:43:22 PM
 #5

How much?

We don't sell miners, we only design miners.

The design can be purchased so other parties can
produce them. We have not set definitive prices
or conditions yet, just probing interrest for now.

intron
Foofighter
Hero Member
*****
Offline Offline

Activity: 882
Merit: 547


BTC Mining Hardware, Trading and more


View Profile
December 14, 2013, 03:04:10 PM
 #6

looks nice guys! But if the BF chip situation stays the same..

ex official Canaan Distributor (Cryptouniverse)
rammy2k2
Legendary
*
Offline Offline

Activity: 1974
Merit: 1003



View Profile
December 14, 2013, 04:51:07 PM
 #7

with hashfast announcing 500 GH / chip .. this is ... dust in the wind ... all respect for your work tho !
cscape
Sr. Member
****
Offline Offline

Activity: 251
Merit: 250



View Profile
December 14, 2013, 04:52:10 PM
 #8

If the bitfury chips become available again, the higher difficulty requires a cheap board. A design like this has minimal BOM cost, so it will be a good solution.

Happy with your c-scape product ? Consider a tip: 16X2FWVRz6UzPWsu4WjKBMJatR7UvyKzcy
cscape
Sr. Member
****
Offline Offline

Activity: 251
Merit: 250



View Profile
December 14, 2013, 04:58:50 PM
 #9

with hashfast announcing 500 GH / chip .. this is ... dust in the wind ... all respect for your work tho !

What's their total cost for the chip, board, power regulators and cooling system ?

Happy with your c-scape product ? Consider a tip: 16X2FWVRz6UzPWsu4WjKBMJatR7UvyKzcy
zulunation
Sr. Member
****
Offline Offline

Activity: 335
Merit: 250


View Profile
December 15, 2013, 09:16:17 PM
 #10

The other side of the board has 15 different ground planes. The radiator can short them. Do you use a thermal pad between PCB and a heatsink? Or all ground covered with protective mask?

PS: Well done.
klondike_bar
Legendary
*
Offline Offline

Activity: 2128
Merit: 1005

ASIC Wannabe


View Profile
December 15, 2013, 10:10:03 PM
 #11

didnt a similar design implemented as an H-board have a problem where if a chip shut off, all other chips became overvolted and shut off or melted?

24" PCI-E cables with 16AWG wires and stripped ends - great for server PSU mods, best prices https://bitcointalk.org/index.php?topic=563461
No longer a wannabe - now an ASIC owner!
RoadStress
Legendary
*
Offline Offline

Activity: 1904
Merit: 1007


View Profile
December 15, 2013, 10:12:37 PM
 #12

If the bitfury chips become available again, the higher difficulty requires a cheap board. A design like this has minimal BOM cost, so it will be a good solution.

Prices for bitfury chips might need to go down too. Can't have those ridiculous prices anymore.

intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 15, 2013, 10:20:36 PM
Last edit: December 15, 2013, 10:30:46 PM by intron
 #13

The other side of the board has 15 different ground planes. The radiator can short them. Do you use a thermal pad between PCB and a heatsink? Or all ground covered with protective mask?

PS: Well done.

Smart guy:) It's Sil-Pad here.



intron
intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 15, 2013, 10:27:42 PM
 #14

didnt a similar design implemented as an H-board have a problem where if a chip shut off, all other chips became overvolted and shut off or melted?

Yes, you are right. We did that design, but we
didn't operate the board, no idea why it went
down in flames. Our strings board is running
solid now for days and days on end.

intron
intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 15, 2013, 11:34:43 PM
 #15

didnt a similar design implemented as an H-board have a problem where if a chip shut off, all other chips became overvolted and shut off or melted?

As a side note: this string configuration of chips is beyond brilliant,
I think we must honour Valery for this. I have never seen anyone
doing this before. It makes board design so much simpler, elegant
and less costly.

intron
kaerf
Hero Member
*****
Offline Offline

Activity: 631
Merit: 500


View Profile
December 15, 2013, 11:41:49 PM
 #16

Very nice. Are you using your own custom miner software?
goxed
Legendary
*
Offline Offline

Activity: 1946
Merit: 1006


Bitcoin / Crypto mining Hardware.


View Profile
December 15, 2013, 11:56:47 PM
 #17

didnt a similar design implemented as an H-board have a problem where if a chip shut off, all other chips became overvolted and shut off or melted?

As a side note: this string configuration of chips is beyond brilliant,
I think we must honour Valery for this. I have never seen anyone
doing this before. It makes board design so much simpler, elegant
and less costly.

intron


+1

BF is the most integrated chip design of all SHA-256 hashers. It's like Intel Haswell with included clock, Vreg, and logic. What's missing is auto-overclock and p-states Wink just jk.

btw which MCU are you using? Thanks!

Revewing Bitcoin / Crypto mining Hardware.
klondike_bar
Legendary
*
Offline Offline

Activity: 2128
Merit: 1005

ASIC Wannabe


View Profile
December 16, 2013, 12:02:29 AM
 #18

didnt a similar design implemented as an H-board have a problem where if a chip shut off, all other chips became overvolted and shut off or melted?

As a side note: this string configuration of chips is beyond brilliant,
I think we must honour Valery for this. I have never seen anyone
doing this before. It makes board design so much simpler, elegant
and less costly.

intron


+1

BF is the most integrated chip design of all SHA-256 hashers. It's like Intel Haswell with included clock, Vreg, and logic. What's missing is auto-overclock and p-states Wink just jk.

btw which MCU are you using? Thanks!

all i can say is: thank god this design does not rely on a Raspberry Pi controller. Somehow my bitfury rig went its first 20 shutdown cycles without any issue, but since then it seems everytime i need to adjust it, the card is damaged. Just today i had to format it, run for 10 min, make the new chainminer, then after a few min of 0.000 results i used sudo reboot and the SD is dead again

24" PCI-E cables with 16AWG wires and stripped ends - great for server PSU mods, best prices https://bitcointalk.org/index.php?topic=563461
No longer a wannabe - now an ASIC owner!
intron (OP)
Sr. Member
****
Offline Offline

Activity: 427
Merit: 251


- electronics design|embedded software|verilog -


View Profile
December 16, 2013, 12:04:42 AM
 #19

didnt a similar design implemented as an H-board have a problem where if a chip shut off, all other chips became overvolted and shut off or melted?

As a side note: this string configuration of chips is beyond brilliant,
I think we must honour Valery for this. I have never seen anyone
doing this before. It makes board design so much simpler, elegant
and less costly.

intron


+1

BF is the most integrated chip design of all SHA-256 hashers. It's like Intel Haswell with included clock, Vreg, and logic. What's missing is auto-overclock and p-states Wink just jk.

btw which MCU are you using? Thanks!

A tiny NXP ARM, LPC11U24FHI33/301.

intron
cscape
Sr. Member
****
Offline Offline

Activity: 251
Merit: 250



View Profile
December 16, 2013, 06:30:43 AM
 #20

Very nice. Are you using your own custom miner software?
The USB interface protocol is the same as for bi*fury, so the latest cgminer/bfgminer version can be used.

Happy with your c-scape product ? Consider a tip: 16X2FWVRz6UzPWsu4WjKBMJatR7UvyKzcy
Pages: [1] 2 3 4 5 6 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!